Manuals - lathes.co.uk borers, drills, shapers and more. (2024)

LATHES, MILLERS, GRINDERS, SHAPERS,BORERS and OTHER MACHINE TOOL
Instruction, Operation and Maintenance Manuals, Handbooks andParts Manuals

lathes.co.uk home page To search for MACHINE TOOL Sales and Specification LITERATURE and CATALOGUES clickhere

<![if !supportEmptyParas]><![endif]>

Always wanted - individual or quantitiesof machine-tool literature of all kinds and in any language. Please phone:01298-871633 or e-mail: manuals@lathes.co.uk

All our publications arehigh-resolution scans, cleaned and post-scanned prepared, printed ontop-quality120g paper to preserve as much detail as possible and bound with aclear cover and card back:

Congratulationson the high quality of the material. I have not seen better copies or bindinganywhere, and I appreciate it! A lot of time, effort and skill must have beenspent to get such high-quality reproductions. Best regards, John Coobick.

Thank you for the very prompt receipt of the variousmanuals. Incredible range of information. Superbly printed, bound and packagedand impeccable service. Thanks very much.
As you probably know, you're not the only English supplier of manuals for agingmachines, but by my experiment by far the best. Your material is better copiedand is made of high quality material.Great work. Sincerely, Peer Klarskov.

Thanks for the manual, I will now strip the lathe to itslast nut and bolt and give it an overhaul. I would not have thought about doingthis without your help and amazing site with its detailed information.

A fantastic Web Site - a reference for all. Many thanks,Alan Whitaker.

Youcan now order manuals on-line here: http://store.lathes.co.uk Most publications can be odered online: justadd the Reference Number that appears before the listing to the end of thefollowing: http://www.store.lathes.co.uk/print/******* e.g. if you wanted to order a copy of theBoxford manual, the reference would be:http://www.store.lathes.co.uk/print/MB375

For personal attention email: tony@lathes.co.uk or phone: 01298-871633 or, from overseas ++44-129887633 and from the USA and Canada 011-1298-871633from 09:00 to 23:00 6 days Fromoverseas: **44-1298-871633

<![if !supportEmptyParas]><![endif]>

Clickhere for alternative orderinginstructions including PayPal, credit and debit cards and bank transfers.
Prices are plus £3.60 UK first-class postage and packing. Overseas post +20% forprint editions. Minimum overseas postage charge £4.

<![if !supportEmptyParas]><![endif]>

MA459X AGIE (Switzerland)Spark Erosion Power Pack 10 Electrical Schematics for the STM-D AgiecutMachine.

MA460 AHCOL Rotary Milling Machine. Operation Instructions with Parts asSectional Drawings.

MA464 AINJEST Ainjest High Speed Screwcutting.Detailed Instruction Manual andSpares Parts Manual as Exploded Parts Diagrams. Covers how to operate on all onmodels as used on a variety of Colchester, Harrison and other makes of lathe.Both the dial-selector and lever-selector models are covered - though not allstyles of body casting are shown - these varying with the particular machine towhich they were fitted.

MA468 AIRMEC Autoset Type N.271K Maintenance and s Serving manual with severallarge electrical schematics.

MA468A AIRMEC Autoset Type N.410 Installation, Programming, Operation andServicing Manual with circuoit Diagrams.

MA470 Taiwanese Mill Drills badged as Naerok, Warco, Nu-Tools, Sealey, Whitecote, Excel, Draper and Ajax, etc. . Covers the Types FR-30, RDM-400/500M/500MF, "Minor", "Major" and similar variants. A double-edition manual that will help with all versions.

MA475 AISIAKIN Pneumatic Dividing Plate with built-in Collet. OperationInstructions with 5 Sectional drawings. Includes copies of the maker'sTechnical Specification and sales catalogue.

AJAX - Manuals for models in addition to those shown below may be available.Phone: 01298-871633 for details.

MA480 AJAX C11M and C11B Lathes (also sold as the "Sofia").Operator's Instruction and Maintenance Instructions and Parts as DetailedSectional Drawings. Includes reproductions of the often damaged screwcuttingand feeds charts.

MA480A AJAX AJ165SS Lathe (also sold asthe "Sofia"). Operator's Instruction and Maintenance Instructions andParts as Exploded Component Drawings.

MA480B AJAX AJ210 Lathe (also sold as the "Sofia"). Operator'sInstruction and Maintenance Instructions and Parts as Exploded ComponentDrawings.

MA480C Ajax AJ250, AJ235, CU582 (SU401, SU502, SP401, SP402) Lathes. Operator'sInstruction and Maintenance Instructions. Just a single publication appears tohave been issued for these machines - the only differences being in centreheight and capacity.

MA480D Ajax AJ400 Lathe. Operation & Maintenance Manual with Parts manualas Sectional Drawings and an Electrical Schematic.

MA480E Ajax 310 X 2225 (310-X-2225) CNC/Conventional Lathe. Instruction,Operation & Parts Manual as Sectional Drawings. Includes a number ofElectrical Schematics.

MA481 AJAX No. 1 Universal Milling Machine: Installation, Operator'sInstruction and Maintenance Manual with Parts Manual as sectional drawings andan electrical schematic.

MA481-23 AJAX No.2 and No.3 Horizontal Milling Machines. Spare Parts Manual asuseful Sectional Drawings.

MA481A AJAX 2V, 3V and 4V Milling Machines: Installation, Maintenance andOperating Manual (two Manuals in one: 2V/3V and 3V/4V) US56

MA481B AJAX 2V, 3V and 4V Milling Machines: Spare Parts Manual: Includesdetailed, A3-sized Cross-Sectional Drawings.

MA481C AJAX 2A MILLING MACHINE (Universal): Operator's Instruction Manual andWiring diagram.

MA481D AJAX No.2, 3 and 4 "Cleveland " Milling machines. Operator'sInstruction and Maintenance Manuals with Parts Manual as Detailed SectionalDrawings and Electrical Schematics. Includes a comprehensive Sales &Specification Catalogue.

MA481E AJAX AJT4 TURRET MILLING MACHINE (BRIDGEPORT TYPE). Installation,Operation and Maintenance Manual with Parts as Sectional Drawings. Picture of the miller here: AjaxMiller

AJAX AJT-2 and AJT-3 Millers. These were built in early and late versions.The earlier model had a vertical head with two parallel rows of push-buttonswitches on the front face with the 2-speed motor switch immediately above and,on the top face of the head, at the front, two levers - one of a toggle typethe other moving radially in a slot. The head on the later lacked theelectrical push-button controls.

<![if !supportEmptyParas]><![endif]>

MC16CAPCO (Caplin Engineering Co.) Q-35 Mk.2 Automatic high-precision CuttingMachine. Operator's Instruction Book.

MC300ACColchester-Clausing 11 (sold in the UK as the Bantam "Mk. 2" 800,1600 and 2000. Combined manual for all three types as a 95-page Instruction andMaintenance Manual and Illustrated Parts Manual with exploded drawings andElectrical Diagrams. Includes complete translation of the text into French andGerman - and copies of the useful Specification, Sales and Specification andAccessories Brochures for each model. Perfect pictures and diagrams. (A picture of the lathe is the second onedown on this page: http://www.lathes.co.uk/bantam )

MC260ACME FU-1 and FU-1S Milling Machine. Operator's Instruction and Service Manualwith Electrical Schematics.

MC260CCME FU-1/E Milling Machine. Parts Manuals as Sectional Drawings.

MC260DCME FU-2, FU-2CM and FU-2CMC Milling Machines. Operator's Instruction andService Manual with Parts as Sectional Drawings and Electrical schematic.

MC260FCME FU-3L Milling Machines. Instruction and Service Manual with Parts asSectional Drawings and Electrical Diagram.

MC260GCME F900 Milling Machine. Basic Operation Instructions with a detailed Parts Manual as Sectional Drawings.

MC26OHCME F1200-RH Milling Machines. "Instruction Book" including Parts asSectional Drawings and Electrical Diagram - (but little in the way ofinstructions).

MC206JCME Vertical Milling Head. Operating Instructions.

A specially assembled Data Pack that gives all known data for thesepopular lathes comprising: Instruction andMaintenance Manual and Exploded Component Parts Manual with detailedscrewcutting instructions and data about how to generate inch and metricpitches from those models without the dual inch/metric box. In addition tocovering ordinary models this edition includes information about the rareall-metric screwcutting gearbox version, the "Third-shaft electricalcontrol" version and details and a Parts Manual for the English and metric"Quick-threader" units and the Hydraulic Copy equipment. Alsoincludes Electrical Circuits and copies of the maker's Technical Specification,Sales and Accessories Catalogues.

MC312 Colchester Student and Master Mk. 2 (and the "Dominion"versions, etc.) with a Flat-top headstock. The Mk. 2 lathe is shown in thesecond picture on my page at: http://www.lathes.co.uk/colchester/page2.html

Instruction & Maintenance Manual and Exploded Diagrams Parts Manual,detailed screwcutting instructions with data about how to generate inch andmetric pitches from those models without the dual inch/metric box and electricaldiagrams. Includes a copy of the maker's Technical Specification, Sales andAccessories catalogue. This is the comprehensive 116-page edition.

MC310-DE Colchester Student & Master Mk.1 Instruction and MaintenanceManual and Exploded Component Parts List. The quality of this manual is not to our usual high standards; however, it is readable.GERMAN EDITION.

MC310-FR Colchester Student & Master Mk.2 Instruction and Maintenance Manualand Exploded Component Parts List. Perfect, high-quality copy. FRENCH EDITION.

MC314 Colchester Student and Master 1800 Instruction and Maintenance Manual andIllustrated Parts Manual as exploded diagrams and Electrical Diagrams.(Includes Additional French and German language sections)

MC314NEW Colchester Student 2500 new model - easily recognised by the controlson the face of the headstock all being in the form of round knobs. Instructionand Maintenance Manual and Illustrated Parts Manual as exploded diagrams andElectrical Diagrams.

MC314OLD Colchester Student-Master 2500 Older modeleasily recognised by the spindle speed controls on the face of the head in theform of a large coloured dial with two concentric paddle controls. Instructionand Maintenance Manual and Illustrated Parts Manual as exploded diagrams andElectrical Diagrams.

MC315 Colchester Student 3100 variable-speed drive lathe. Instruction andMaintenance Manual and Illustrated Parts Manual as exploded diagrams andElectrical Diagrams..

MC317 Colchester Master VS 3250 Operation & Maintenance Manual with PartsManual as Sectional Drawings. Includes a wiring diagram of the rear of thecontrol panel.

MC318 Colchester Triumph (and "Dominion") 15-inch lathes. A complete174-page data pack covering all models from the late 1930s on either separatecast-iron plinths or on the later (early 1950s) full cabinet stands. Picturesof a typical example hereInstruction and Maintenance Manual and with Exploded Component Parts Pictures.The literature includes a copy of the first Triumph Operation and Parts Manual(originally in A5 format) and the later A4 edition covering all models fromfirst to last including the later single-slot (safety) apron types and allgearbox variants - Standard, Dominion and Continental - as well as the rarer3rd-shaft control and Hydraulic-copying models. Includes full screwcuttingcharts, electrical schematics and several copies of the maker's sales andSpecification catalogues dated 1930s to 1960s.

MC322 Colchester Triumph 2000 Mk. 1 and Mk. 2. Full 110-page ComprehensiveInstruction & Maintenance Manual & Illustrated Parts Manual as ExplodedDiagrams with 17 Electrical Schematics.
This version includes both early and late models with different clutch types,apron modifications, etc. with the necessary drawings and alterations clearlyshown.
Also includes extra sections detailing the accessories together with explodedparts diagrams for the:
rapid threader inch and metric types, lever-action collet closer,centring-centre. longitudinal positioning dials, dual metric/inch feed dials,chip guards, lighting, steadies, stops, 6-position longitudinal stops, taperturning, Dickson-type quick-change toolpost, the maker's own 4-way toolpost,rear toolpost, power-drilling attachment, capstan unit, draw-bar unit, coolantequipment and a list of "standard items" (ordinary nuts, bolts,seals, motors, Woodruff keys, nipples, dowels, roll pins, circlips, bearings,bushes, cap screws, Allen keys, springs, electrical contactors, etc.)

MC322A Colchester Triumph 2000 Mk. 1 and Mk. 2. Full 114-page Comprehensive Instruction& Maintenance Manual & Illustrated Parts Manual as Exploded Diagramswith 17 Electrical Schematics.
This version includes both early and late models with different clutch types,apron modifications, etc. with the necessary drawings and alterations clearlyshown.
Also includes extra sections detailing the accessories together with explodedparts diagrams for the:
rapid threader inch and metric types, lever-action collet closer,centring-centre. longitudinal positioning dials, dual metric/inch feed dials,chip guards, lighting, steadies, stops, 6-position longitudinal stops, taperturning, Dickson-type quick-change toolpost, the maker's own 4-way toolpost,rear toolpost, power-drilling attachment, capstan unit, draw-bar unit, coolantequipment and a list of "standard items" (ordinary nuts, bolts,seals, motors, Woodruff keys, nipples, dowels, roll pins, circlips, bearings,bushes, cap screws, Allen keys, springs, electrical contactors, etc.)

MC322ELC ELECTRONIC TRIUMPH CNC Lathe. Detailed (378-page) Operation and PartsManual

MC322CNC Colchester CNC Lathes Models: CNC1000, CNC2000, CNC3000 and CNC4000with Fanuc OTA Controls. Massive 680-page Comprehensive Installation, Instruction, Maintenance, Parts and Programming Manual.

MC326 Colchester Triumph VS2500 (variable speed) Comprehensive Instruction andMaintenance Manual and Illustrated Parts Manual as exploded diagrams andElectrical Diagrams.

MC326A Colchester Master VS3250 (variable speed) Comprehensive Instruction andMaintenance Manual and Illustrated Parts Manual as exploded diagrams and twoelectrical schematics and a fault-finding guide for the spindle drive.

MC328 Colchester Mascot Mk. 1 (1950s and early 1960s"round-headstock" model). Instruction and Maintenance Manual,Illustrated Parts Manual as Parts Pictures and a copy of the Sales &Technical Specification Catalogue. Pictures of an example here

MC330 Colchester Mascot 1600 Data Pack with Instruction and Maintenance Manualand Illustrated Parts Manual as Exploded Component diagrams and 13 ElectricalDiagrams. Covers both the early and late models with complete spares lists forboth types. (Includes French and German language sections). Full 172-pageedition.
Pictures of an example here

MC330A Colchester Mascot & Mastiff VS Models VS1600, VS1800, VS2000, VS2000(variable-speed) Large Edition Instruction and Maintenance Manual andIllustrated Parts Manual as exploded diagrams. (Includes French and Germanlanguage sections)

MC330B Colchester Mastiff 1400 Instruction and Maintenance Manual andIllustrated Parts Manual as exploded diagrams and Electrical Diagrams. Thisversion has full details in English, French and German. Pictures of an example here

MC330C Colchester MASTIFF VS1800 and MASCOT VS2000 (variable-speed) Detailed Instructionand Maintenance Manual and Illustrated Parts Manual as Sectional Drawings.Includes sections on the accessories: high-speed threading units, bed stops,taper-turning unit, steadies, toolposts, guards, Heidenhain Glass Scale andother fittings, coolant assembly, etc. Details of the wiring harness cablingspecifications, an electrical schematic for the relay board, schematics andconstructional details of the headstock push-button assembly, Electricalschematics and layout diagrams of the apron control panels, constructional andlayout details of the electrical enclosure assembly, etc.

MC330ELEC Colchester Mascot and Mastiff ELECTRONIC Lathes. Detailed, 468-pageInstruction and Spare Parts Manual. Bound in two Volumes.

MC330D Colchester Magnum 1250 and LB800 Instruction and Maintenance Manual anda Parts Manual as Exploded Component Drawings. Includes an Electrical Schematicand two copies of the maker's Sales, Technical Specification and AccessoriesCatalogue. The two lathes were identical apart from centre height, spindlebore, spindle nose and speeds - the Model "1250" having a top speedof 1250 r.p.m. and the "LB800" a maximum of 800 r.p.m.

MC330DFColchester Magnum 1250 and LB800 Lathes English, French and German Language Edition. Instruction and Maintenance Manual and a Parts Manual as Exploded Component Drawings. Includes an Electrical Schematic and two copies of the maker's Sales, Technical Specification and Accessories Catalogue. The two lathes were identical apart from centre height, spindle bore, spindle nose and speeds - the Model "1250" having a top speed of 1250 r.p.m. and the "LB800" a maximum of 800 r.p.m.

MC330T2 Colchester TORNADO Type T2 (T200) Operation, Programming, Parts,Accessories, Trouble Shooting and general Maintenance Manual. Available inEnglish, French or German. 500 pages (the Fanuc and Heidenhain manuals areavailable separately)

MC330T4 Colchester TORNADO Type T4 CNC Lathe Operation, Programming, Parts,Accessories, Trouble Shooting and general Maintenance Manual. Available inEnglish, French or German. 500 pages (the Fanuc and Heidenhain manuals areavailable separately)

MC330T6 Colchester TORNADO Types T6 CNC Lathe Operation, Programming, Parts,Accessories, Trouble Shooting and general Maintenance Manual. Available inEnglish, French or German. 500 pages (the Fanuc and Heidenhain manuals areavailable separately)

MC330T8 Colchester TORNADO Type T8 CNC Lathe Operation, Programming, Parts,Accessories, Trouble Shooting and general Maintenance Manual. Available inEnglish, French or German. 500 pages (the Fanuc and Heidenhain manuals areavailable separately)

MC330T10 Colchester TORNADO Type T10 CNC Lathe Operation, Programming, Parts,Accessories, Trouble Shooting and general Maintenance Manual. Available inEnglish, French or German. 500 pages (the Fanuc and Heidenhain manuals areavailable separately)

MC330FA Colchester TORNADO Types A50, A90, 120M, 220 and 220M DetailedOperation Manual with a Parts Manual as Sectional Drawings. . Available inEnglish, French or German.

MC330FA220 Colchester Colchester TORNADO Types 220 and 220M. A huge, detailed985-page Operation Manual, Programming, Parts Manual as Sectional Drawings andElectrical Schematics. Bound in four volumes.

MC330-120 Colchester Colchester TORNADO Lathes Types 120M, Detailed (651-page)Operation Manual, Programming and a Parts Manual as Sectional Drawings.

MC330FB Colchester TORNADO 200 Very large, Dedicated Operation, Programming,General Maintenance, Accessories and Parts Manual with numerous ElectricalSchematics.

MC330LT Colchester TORNADO LT600 CAD/CAM Data Package covers all aspects ofprogramming required (using Windows) on the on TORNADO and STORM LATHES frombasic two-axis machines to full three-axis models the TORNADO and STORM 120Mand 220M. 460 pages.

MC330FC Colchester TORNADO 80 (Sold in the USA as the Clausing Storm 80)Operation, Programming and Parts Manual. Available in English, French and German. 500 + pages

MC330X Colchester CNC500 Operating, Programming and Maintenance Manual withsome electrical schematics. A detailed, 380-page edition.

MC330XX Colchester CNC Bar-feed Accessory Unit. Installation and Test Manual.

MH113 COLCHESTER-HEPWORTH HYDRAULIC COPYING (TRACER) Attachments for Series:300, 400, 450, 470, 472, 600 and 620 as fitted to Colchester, Harrison and manyother makes of lathe. A complete collection of all the literature ever producedfor these models Operator's Instruction Manual and Spares as SectionalDrawings.

MA51 Colchester-AINJEST High Speed Threading Attachment. Detailed InstructionManual and Spares Parts Manual as Exploded Parts Diagrams. Covers how tooperate on all on models as used on a variety of Colchester, Harrison and othermakes of lathe. Both the dial-selector and lever-selector models are covered -though not all styles of body casting are shown - these varying with theparticular machine to which they were fitted.

MC335 COLCHESTER HYDROPOWER 390 Lathe: Instruction and Maintenance Manual.

MC335C Triumph Hydropower 390 Lathe. Set of nine large electrical schematics.As these are "blueprints" they are best sent as high-resolution filesor PDFs

MC335A COLCHESTER HYDROPOWER 430 Lathe: Operator's Instruction and MaintenanceManual. Includes 10 Electrical Schematics MC336A

MC335B COLCHESTER HYDRO NC540 Lathe: "This manual covers the detailedMaintenance of the mechanical parts of the machine and the setting ofelectrical items such as limit switches". Includes a circuit diagram forthe Variator Mk. V1 Servo Controller.

MC338 Collet & Engelhard Tools Handbook. For use with the Company'sHorizontal Boring & Milling Machines. A complete listing of accessories,cutters, milling tools, facing attachments, clamping fixtures, work-holdingfixtures, accessories. tables and charts. 92 pages.

MC345 COMET Turret Milling Machine. Operator's Instruction Manual with PartsManual as Exploded Component Drawings.

MC347 "Complex" RF-30 Milling Machine (Similar to many other types of"Mill-Drill" made in Taiwan). Operation Manual with Parts as ExplodedComponent Drawings.

MC350 COMPTON Compressors. Diaphragm Models including the older 657 Models..Operating Instructions and Sectional Parts Drawings.

MC370/MP238B COMPUTURN CNC-390 lathe (by PONAR-WROCLAW and also badged asChurchill). Comprehensive Operator's Instruction Manual with Parts as detailedSectional Drawings.

MC380 CONE Automatic 4 Spindle Conomatics. Operator's Instruction Manual.

MC380A CONE Automatic 6 Spindle Conomatics Models SW, SX, SY, TA, SN, SD, SE,SF and SZ. Operator's Instruction Manual.

MC380B CONE Automatic 6 Spindle Conomatics Models TV and TVB Operator'sInstruction Manual.

MC380D CONE Automatic 8 Spindle Conomatics. Parts Manual.

MC380E CONE Automatic 6 Spindle Conomatics. Parts Manual as ComponentPhotographs for the "SD" and "SE" Models.

MC380F CONE Automatic 6 Spindle Conomatics. Parts Manual as ComponentPhotographs for the "SF" and "SZ" Models.

MC380G CONE Automatic 6 Spindle Conomatics. Parts Manual as ComponentPhotographs for the "SW", "SX", "SY" and"TA" Models.

MC380H CONE Automatic 6 and 8 Spindle Conomatics. Operator's Instruction Manualfor the Chucking and Spindle Stopping Mechanisms.

MC380J CONE Automatic "A" Models - all Types. Operator's InstructionManual.

MC380K CONE Automatic "C" Models - all Types. Operator's InstructionManual.

MC380L CONE Automatic 9/16" Spindle 6-Spindle Conomatics. Parts Manual asa written list of components "QE" Model.

MC382 CONRAC Model 412 Synchro-Bend. Comprehensive Operator's Instruction andMaintenance Manual with Electrical schematics and Parts as Assembly Drawings.

CONSOLIDATED PNEUMATIC (and Power Vane) - See also under "Broomwade"

MC384 CONSOLIDATED PNEUMATIC Type T Horizontal Compressor. Instruction Manualand Parts as Sectional Drawings.

MC384A CONSOLIDATED PNEUMATIC600-RO-2 and 600-RO-2HP Portable Compressor. Parts Manual as useful ExplodedComponent Drawings.

MC388 CONTRAVES Compact ADB/F (200Series) Operating Manual and a set of Service Guides (ex-service engineer)comprising: several sets electrical diagrams; Electrical Test and Set UpInstructions for Interact 4 with 150TNC control, Series 1 Interact Mk.2 withTNC 150/B/TNC155A; Series 2 Interact 4 with TNC 150/B/TNC155A; WHS D/A SpeedReference PCB main spindle drive.

MC388A CONTRAVES NC 500 Series Servo Controllers Operation & Service Manual.

MC390 CONTROL TECHNIQUES FXM5 Field Controller for DC Motors. Users' Guide. (See also under "Mentor" below)

MC392 COOKE (Cooke Troughton and Simms) HORIZONTAL COMPARATOR. OperatingInstructions. Used for verifications of diameter, roundness and taper of plugand ring gauges.

MC394 COPMATIK Capstan lathe (by MATIK). Instruction and Maintenance Manualwith Electrical Diagrams.

MC396 COPYMAX Capstan Lathe Attachment - all models (by Target Engineering):Instruction Manual. Includes details of the Copy Box Tool Models C1 and C2. US70

MC398 CORNELIS Thread Generating Machine. Detailed Operating and MaintenanceManual (pc).

CORONA Drills and Machine Tools: - See under POLLARD below

CORONET - See also under RECORD

MC400 CORONET MAJOR, MINOR, MINORETTE, ELF, CONCORD (etc) planers, bandsaws,sawbenches, etc. A complete data pack compendium for Coronet productsconsisting of: Instruction Sheets and handbooks for the older Major, Minor,Minorette and "Home Cabinet Maker" lathes. This shows the assembly ofthe machine and the many accessories and how to mount them correctly and safely.A full Manual for the later Major and the Major CMB500"Multi-function" machine based on the Major. A full manual for theMinor and Minorette. A very interesting booklet: "Wood Working & WoodTurning on Universal and Independent Machines". A collection early andlate Coronet advertising literature including the Major and Minor lathes, theMinorette Woodworking Centre and the Minorette "10-in-one". Theseshow the mounting of each accessory including: Planing & Rebating Machine,Circular Saw Table, Mortising Attachment, Bandsaw, Disc Sander, Flexible Drive,Long-hole Boring, etc. plus changes to the specifications of the various lathesand other machines over the years. 148+ pages of data.

MC400A CORONET Minor/Minorette/Elf and the "Ten-in-one" based on thesemodels: a special data pack with all published information including a copy ofa very interesting booklet: "Wood Working & Wood Turning on CoronetUniversal and Independent Machines".

MC400B CORONET (and RECORD) Woodturning lathes No. 1, No. 3 (twin bar-bedstyle) Operator's instructions with Sales and Specification Catalogues. Alsomarketed as the RECORD CL1, CL2, CL3, CL4 etc. A compendium of every knownpublication for these models.

MC400C CORONET CONSORT UNIVERSAL WOODWORKER. Maker's Assembly and InstructionManual with exploded component diagrams.

MC410 Corpet Louvet (France) Hydraulic Shearing Machine for Chamfering CC 3185 x 15. Operation, Adjustments and Servicing.

MC420 CORREA F1U-E Universal Milling Machine. Operator's Instruction andServicing Instructions with Electrical Schematics and fold-out SectionalDrawings.

MC430 CORTINI (Meccanica Cortini) C3Lathe Operation Manual with a separate Electrical Manual including circuitDiagrams. ITALIAN TEXT.

MC440 COS-POR UniversalHigh-precision Dividing Head. Instruction Manual.

MC445 COVEL 91-A Universal Tool & Cutter Grinder. Operation Manual With Parts as Sectional Drawings. Includes copies of the maker's Technical Sales and Specification Catalogs for the machine and its accessories including separate sheets on the Large Radius Grinding Attachment, the Tap Grinding Attachment and Precision Machine Vices.

MC450 COVENTRY DIE HEADS "The Book of the Coventry Die Head". Highlydetailed, 92-page, copiously-illustrated large-format edition that givescomplete data, with in stage-by-stage illustrations, of how to operate,dismantle and service these units (manufactured by Herbert).

MC450A COVENTRY DIE HEADS Spare Parts Manual with Illustrations and usefulCross-Sectional diagrams of the various units including all "D"types. (Herbert)

For COVENTRY GUAGE See Under MATRIX

MC456 COWELLS 90 Lathes. Detailed and interesting Operation & MaintenanceManual. Covers all versions.

MC500C CRAFTSMAN 6-inch Lathe Mk.1 Click here for pictures. Craftsman 6-inchLathe Mk.1 Models: 101.2048, 101.2048F, 101.2120, 101.2140, 101.M1518 and 101.07300,etc. (all a clone of the Atlas 6-inch). A complete Data Pack consisting of:Operator's Instruction Manual with extra pages on chuck operation and care, aSpare Parts Manual as exploded Component Drawings and the essentialscrewcutting data and charts for inch and metric pitches (strangely missingfrom the original Manual). Also included are detailed Craftsman and Atlasadvertisem*nts detailing the technical specification and accessories - the mainelements of these publications being the more informative Atlas publications.While the ordinary manual has just 8 pages this is a complete pack with 62pages.

MC500D CRAFTSMAN 6-inch lathe Mk. 2"square style" Click here for pictures (a"clone" of the Atlas 6-inch mk.2)Operator's Manual with Spare PartsManual as Exploded-component Drawings and screwcutting charts. Includes a copyof the Sales and Specification catalogue.

MA100 AA CRAFTSMAN 80 and Dunlap 109 Lathes Click here for picturesAA Type 109(Craftsman) and Craftsman Model 80 Lathes (as made by the American "DoubleA" Company) and Branded "Dunlap 6-inch", "Craftsman80" and "Craftsman 6-inch". Operating Instructions andIllustrated Spares Sheets for all the models made plus a large set (75 pages)of advertisem*nt and technical specification pages from 1932 to 1980 showingthe development of the lathes.

MC500F CRAFTSMAN 9-inch lathe Operator's Instruction and Maintenance Manual andIllustrated Parts List. This edition is for the very early metal-turning lathewith the multiple V-belt drive. It was also sold with "Atlas" and"Metalmaster" badges. Click here for pictures

MC500G CRAFTSMAN 12-inch LATHES. Click here forpictures Various Models including: 101.20140, 101.20280, 101.20300,101.20320, 101.20650, 101.20670, 101.20690, 101,20710, 101.20730, 101.20750,101.20770, 101.20790, 101.27440, 101.27430, 101.07301, 101.07360, 101.07361,101.07362, 101.07363, 101.07380, 101.07381, 101.07382, 101.07383, 101.07400,101.07401, 101.07402, 101.07403, etc. A complete package of information thatcovers all models from the original 1930s lathe (a clone of the Atlas 10-inch)to last version in 1958. It includes: 1) a very comprehensive Manual with over240 pages that contains detailed Operating & Maintenance Manual and thecorrect and extensive thread cutting charts (different to those on the Atlasversion) - it's probably the best lathe instruction book ever produced by alathe manufacturer. 2) extra instructional sheets, but never included in themain Manual: taper turning attachment; fitting new leadscrew nuts, steadyrests, adjustable bed stop. 3) a complete, Illustrated Parts Manual withexploded diagrams. 4) a set of reproductions of the all original advertisingmaterial (some very rare) that give a complete technical specification for thelathe and shows the changes from 1932 to 1960 together with illustrated listsof all the accessories.
34GBP on CD including air-mail post 58GBP Printed as a very high-qualityreproduction on 120g paper and bound including air-mail post (it's a heavybundle ....)

MC500H CRAFTSMAN 12-inch LATHES late model from 1958 onwards. Click This modelwas identical to the Atlas 12-inch and sometimes branded as the"Commercial". It is also found with the following (and probablyadditional) Model Numbers: 101.28950, 101.28910 or a similar 101.289** numberincluding: 101.2758, 101.2759, 101.2895N, 101.2893N, 101.2894N, 101.28970, 101.28980,101.2897N, 101.28990, 101.28991N and 101.28993N2. Pictures can be found here:http://www.lathes.co.uk/craftsman/page3.html A complete package of informationthat covers all models from the original 1930s lathe (a clone of the Atlas10-inch) to last version in 1958. It includes: 1) a very comprehensive Manualwith over 240 pages that contains detailed Operating & Maintenance Manualand extensive thread cutting charts - it's probably the best lathe instructionbook ever produced by a lathe manufacturer. 2) extra instructional sheets, butnever included in the main Manual: taper turning attachment; fitting newleadscrew nuts, steady rests, adjustable bed stop. 3) a complete, IllustratedParts Manual with exploded diagrams. 4) a set of reproductions of the originaladvertising material (some very rare) that give a complete technicalspecification for the lathe, shows changes over the years and illustrated listsof all the accessories. 5) the special instruction sheets produced by Sears fortheir revised post 1959 models; surprisingly, these add useful additional factsand instructions to those issued for lathes carrying ATLAS badges.
34GBP on CD including air-mail post 58GBP Printed as a very high-qualityreproduction on 120g paper and bound including air-mail post (it's a heavybundle ....)

MC500L/MA242 CRAFTSMAN SHAPER Instruction Manual and Parts Manual Click here for pictures This is thecomprehensive (and rare) edition produced for the UK market, not the simplespares list issued in the USA. Includes the first-edition, beautifullyillustrated Sales and Specification and Accessories Catalogue (No. 30 and )additional pages from later Catalogues.

MC500M CRAFTSMAN Milling Machine Click here for pictures Instruction Manualand Illustrated Parts Manual. Includes a copy of the original Sales andSpecification catalogues (Atlas and Craftsman) that show all versions of themiller, give detailed specifications, illustrate the extensive accessory rangeand give accurate descriptions of the construction, parts and controls.

MC500N CRAFTSMAN/COMPANION/DUNLAP (USA): compilation of all 86 pages from theearly Craftsman catalogs which show all the Metal and Wood lathes. Covers:1929, 1930, 1932, 1933, 1935, 1936, 1937, 1938, 1939, 1940, 1941, 1942 and 1943- when the catalogue was withdrawn for the war years.

MC500P CRAFTSMAN/COMPANION/DUNLAP post World War 2 Metal and Wood Lathes plusMillers and Shapers: compilation of every page showing these machines. Includesthe first post war catalogue of 1948, then 1949, 1950, 1952, 1953, 1954, 1955,1956, 1957, 1960/1, 1963, 1966, 1973/4 and 1980/81.

MC501 CRAFTSMAN "The Wood Lathe" An instructional Booklet toaccompany the company's wood-turning lathes. Published from the 1930s to the1960s. 32 pages

MC501A CRAFTSMAN 2-speed, 4-inch Dustless Belt Sander model 315.22670. Assembly,Operating and Illustrated Parts Manual.

MC501B CRAFTSMAN POWER HACKSAW Model 108.1502/1501 3 sheets of Assembly,Operating Manual and Illustrated Parts Manual.

MC501C CRAFTSMAN SPRAY GUN Model 106.157121: Owner's Manual and Parts asExploded Component Drawings.

MC501D CRAFTSMAN Twin-cylinder Spray painter Model 106.154541 and 106.154591:Owner's Manual and Parts as Exploded Component Drawings.

MC520 Crankshaft Balancing: a booklet by Dott. Ing. Luigi Buzz1. An excellentprimer with general principles, specific examples, balancing pions, connectingrods, various forms of crankshaft, balancing machines and principles of theory.

MS845E SWIFT Craven 16B lathe Series 60.Operator's Manual

MC540 CRAVEN-RIGID Milling Machines - all models (the type identifiable by theround support column at the front of the knee). Detailed operating Instructionswith Simple, Differential and Spiral Indexing Tables.

MC545 CRAWFORD Collets Data Pack: standard collets and Crawford Multi-Bore Collets and Collet Chucks in standard and power-feed forms (Pneumatic and Hydraulic): a three-part book, the first with applications by makers, a second 41-page identification section with drawings of collets and their dimensions and a third edition showing the. Makers covered include: Bechler, Boley, Boley Leinen, Boxford, Bridgeport, Brown & Sharpe, Brown & ward, B.S.A., B.S.A.Gridley, Cataract, Conomatic, Colchester, C.V.A., Davenport, Dowding & Doll, EMI-MEC, Feinler, Gildmaster, Habbeger, Herbert, Index, Iralag, Marlco, Manhurin, Peterman, Pittler, Pultra, Schaublin, Schutte, Smart & Brown, Strohm, Tarex, Tornos, Traub, H.W.Ward and Wickman. Please note: this is not a service and repair manual but does appear to be the totality of data published by the company on collets and their various chucks.

MC545A CRAWFORD Multibore Power-operated Collet Chucks. Mounting & Operating Instructions.

MC550 CRESSEX Power Presses. All models Operator's Instruction Manual and a Parts Manual useful Sectional Drawings.

MC560 CREUSEN Double-ended Grinders. Directions for Use.

CRI-DAN High Speed Threading machines (lathe) - see under Herbert

MC580 CRI-DA Lathe Type D ATS 300 mm centre height by 700 to 2500 mm betweencentres. Operation and Maintenance Instructions, screwcutting data, lubricationinstructions and 28 very clear, large sectional drawings of all the parts.Includes reproductions of the screwcutting and feed charts.

MC610 CROFTS Variable-Speed Motor Units and Variable-speed Drive PulleysAutomatic and Stationary Adjustment Types. Installation, Maintenance,Lubrication and Belt Changing Manual.

C610A CROFTS B.O.M.-L Clutches - detailed catalog (not a Manual) with usefulSectional Drawings

MC620 CROMWELL (Smallpeice) S800 Precision Lathe Manual. A compendium of allavailable Cromwell literature (including a Sales and Specification cataloguefor the 4-inch Mk.2) that includes Sectional Parts Drawings of the whole lathe(both English and Metric gearboxes) Wiring Diagrams, Operating Instructions anda reproduction of the four known Sales, Technical Specification and AccessoriesCatalogues.

MC670 CROUZET TC-125 Lathe. Operator's Instruction and Maintenance manual withElectrical Connections data and many useful Sectional Drawings. French text.

MC670A CROUZET 125-VM lathe. Operator's Instruction and Maintenance Manualwith. Electrical drawings and many useful Sectional Drawings. French text.

MC670B CROUZET FC100 Miller. Operator's Instruction and Maintenance Manualwith. Electrical drawings and many useful Sectional Drawings. French text.

MC670B CROUZET Type 133 Miller. Brief (13-page) Operator's Instruction andMaintenance Manual with. Electrical drawings. French text.

MC680 CROWN Stacker Truck Series W and WE. Operator's Instruction and ServiceManual with Parts Manual as Useful Exploded-component Drawings. Includes awiring diagram.

MC680A CROWN Stacker Truck Series M. Operator's Instruction and Service Manualwith Parts Manual as Useful Exploded-component Drawings. Includes a wiringdiagram.

MC680B CROWN Stacker Truck Series WB. Operator's Instruction and Service Manualwith Parts Manual as Useful Exploded-component Drawings. Includes a wiringdiagram.

CRUSADER CNC controller, etc. - See under ANILAM above

MC690 Crypton (FKI Crypton)Instruction, Fault-finding and Servicing Manual for the 267/CO/HC Analyser and 270 CO/HC/CO2/O2 Analyser and Instructions for the 267/270 POR and 267/270 PORD.

MC700 CSEPEL Model UF-VF222 and 221 Horizontal and vertical Millers. Parts asSectional Drawings and Electrical Schematics.

MC700A CSEPAL UF24 and VF24 UNIVERSAL and VERTICAL MILLING MACHINES:Comprehensive Instruction, and Maintenance Manual with Spares as fold-outDetailed Sectional Drawings and Electrical Schematics

MC720 C-Tec Series DDC Bi-Directional Counter. Owner's manual with electricalschematics.

MC740 CUNLIFFE and CROOM No. 2 Milling Machines - Vertical, Universaland Horizontal. Operator's Instruction and Maintenance Manual with UsefulSectional Drawings. Includes a copy of the maker's 28-page Sales andSpecification Catalogue. This milling machine was identical to the one badgedas the "Archdale No.2" - the manual and catalogue for which arerather more comprehensive - hence both edition and all catalogues are includedgiving a complete Data Pack for the machine. (If you have a Cunliffe and Croommilling machine it's almost certain to be a "No. 2" - it seems to bethe only one the Company made from 1933 onwards).

MC741 CUNLIFFE and CROOM and ARCHDALE Indexing tables for Universal MillingMachines. The UNIVERSAL type is the Horizontal Miller with a "swingtable" - the charts are for using the dividing head, powered andhand-turned, when calculating divisions, leads and sprirals. Changewheel seetingsare provided for Plain and Differential Indexing and Indexing Movements forHigh Numbers.

MC751 CUOGHI Drill Sharpening Machine Models APE25, APE40 and APE60.Instruction and Maintenance Manual.

MC755 CUTTERMASTER Tool and Cutter Grinder. Operator's Manual with Parts asExploded Component Drawings.

MC755A CUTTERMASTER Two-way Relieving Fixture. Instruction Manual.

MC760 (Identical to MT18 below) "CUTTER GRINDING" (Tool and CutterGrinding) . Jones and Shipman 60 page Tool and Cutter Grinding. ExplanatoryBooklet, which details the principles, which must be adhered to for successfuloperation of a Tool and Cutter Grinder. Details specific examples withwonderful photographs and explanations. Instructions are also applicable toother makes of grinder.

CVA MILLING MACHINES see below and also under KEARNEY and TRECKER fordual-marked models.

MC870 CVA 1 and 1A Series PRECISION LATHE (sometimes marked as Kearney &Trecker or Lodge & Shipley in the USA): Detailed Operating Instructions. Threemanuals in one: an early edition, a late edition and an additional, simpleredition - almost certainly the complete set published by CVA. Also included, inaddition to the manual, is a comprehensive 41-page set of CVA advertisingliterature (*more to be scanned). The manuals contain, amongst other things:Highly detailed and comprehensive screwcutting instructions and charts,Installation instructions, Lubrication requirements and oil types fromdifferent makers (of the period), Operation Instructions, Basic adjustments,General description, Detailed specification, Electrical equipment, WiringDiagram, Additional Equipment, Special equipment, Annotated photographs ofcontrols.

MC870A CVA 1 and 1A Series PRECISION Backgeared and Screwcutting LATHE(sometimes marked as Kearney & Trecker or Lodge & Shipley in the USA):Illustrated Replacement Parts Manual as Detailed Sectional Drawings.

CVA MILLING MACHINES: see also under KEARNEY and TRECKER for dual-markedmodels.

MC876 CVA 3CE and 2CES Milling Machines (Kearney and Trecker). InstructionManual and Maintenance Manual

MC878 CVA 3CE and 2CES Milling Machines (Kearney and Trecker). IllustratedParts Manual with complete high-quality Sectional Drawings of the wholemachine.

MC880 CVA 2CE and 2E Milling Machines (Kearney and Trecker). Instruction Manualand Maintenance Manual *

MC882 CVA 2CE Milling Machine (Kearney and Trecker). Parts Manual ashigh-quality Sectional Drawings.

MC884 CVA 2E and 2CE Milling Machine (Kearney and Trecker). Instruction Manualand Maintenance Manual

MC886 CVA Mechanical Pressure Lubricators Type BMRD: Working Particulars andRunning Manual

MC887 CVA No. 8 Single Spindle Automatic Lathe: Operator's Instruction Manual.

MC887B CVA No. 8 Single Spindle Automatic Lathe: Illustrated Parts Manual withExploded Component diagrams

MC887C CVA No. 8 Single Spindle Automatic Lathe: Tools and equipment list.

MC887D CVA No. 8 Single Spindle Automatic Lathe: Attachments Spares List asExploded Component Pictures.

MC888 CVA No. 12 Single Spindle Automatic Lathe: Detailed Instruction Manual(late edition with fuller information)

MC890 CVA No. 12 Single Spindle Automatic Lathe: Illustrated Parts Manual withExploded Component Diagrams and Wiring Diagrams for the Lathe and Bar FeedUnity.

MC890 CVA No. 12 Single Spindle Automatic Lathe: Attachments Spare Parts Manualwith Exploded Assembly Diagrams. Covers: Deburring, Slotting, Vertical Slide,Overhead turning, Cross Drilling, High-speed Drilling, Tap and Die Revolving,Combination Drilling and Tapping, Combination Cross Drilling and High-Speed,Turret Milling, Nut Tapping.

MC892 CVA No. 20 and 26 Single Spindle Automatic Lathe: Operator's InstructionManual and Instruction Book *

MC893 CVA No. 16 and No. 20 Single Spindle Automatic Lathes: Spare Parts Manualas exploded Component Drawings, Electrical Diagrams and Cam layout tables.

MC893A CVA No. 20 Single Spindle Automatic Lathe: ATTACHMENTS Spare PartsManual with Exploded Component diagrams.

MC894 CVA "A Series" Single Spindle Automatic Lathes A12, A16, A20.Operator's Instruction Manual with a wiring diagram.

MC894 CVA "A Series" Single Spindle Automatic all A12, A16 and A20Types. Parts Manual as Exploded Component Drawings.

MC896 CVA Single Spindle Automatic "A Series" Secondary Turret andvertical Drilling Attachment. Operator's Instruction Manual and Parts Manual asExploded Component Diagrams.

MC897 CVA Single Spindle Automatic "A Series" ATTACHMENTS (verticalslide, slotting, deburring, drilling, turret milling, etc.). Spare Parts Manualas Exploded Component Diagrams.

MC898 CVA Gear Hobbing Machine No. 2. Operator's Instruction Manual with tableof Dividing and Change Gears.

MC899 CVA 10-ton Dieing Press. Operating and Maintenance Notes. Includes auseful Technical Sales and Specification catalogue.

MC899A CVA 25-ton Dieing Press. Detailed Operator's Instruction and MaintenanceManual with a Parts Manual as Exploded component Drawings. Includes bothMechanical and Air-clutch Models and Instructions for adjusting the MagneticFriction Clutch. Includes a wiring schematic.

MC899B CVA 50-ton Dieing Press. Parts Manual as Sectional andExploded-component Drawings.

MC899BE CVA 50-ton Dieing Press. A collection of 5 Large Electrical Schematicsand Connection Diagrams.

MC899C CVA 75-ton Dieing Press. Parts Manual as Sectional andExploded-component Drawings.

MC920 CYCLEMATIC CTL-618EM Lathe (copy of Hardinge HLV-H) Operation & MaintenanceManual with Parts Manual as sectional Drawings and an Electrical Schematic.

MD1 D'ANDREA Precision Surfacing and Boring Attachment Types TS1, TS2, TS3, TS4 and TS5 for Milling and Boring Machines, Jig Borers and Radial Drills, Instruction Manual with Parts as Exploded Component Drawings.

MD3 DAINICHI KINZOKU KOGYO B40M and BX40M CNC "Mill-Turning Centre".Massive Operation and Maintenance Manual with Hydraulic schematics.

MD3A DAINICHI KINZOKU KOGYO B40M Electrical Circuit Diagrams Manual

MD4 DAITO ST-6090 Horizontal Bandsaw. Operation and Maintenance instructions..

MD5 DALAPENA SPEEDHONE. Instruction Manual for Machines with capacity 1.143mmto 79mm.

MD10 DANCKAERT Band saw with 31.5" wheels. Basic Assembly, Operator'sInstruction, Lubrication and some sectional drawings. 6 pages.

MD10A DANCKAERT 9947 "Cliches" machine - appears to have a large sanding/thicknessing belt running around rollers. Operation, Mainteace and Parts as Sectional Drawings

MD15 DAN 750 Lathe (Switzerland) Operation Manual with electrical schematicsand a number of useful sectional drawings. GERMAN text.

MD20 DANFOSS VLT5 Frequency Inverters. Service Manual

MD20A DANFOSS VLT215, VLT220, VLT230, VLT380, VLT415, VLT460 and VLT500VFrequency Inverters. Service Manual

MD40 DANOBAT Danomatic- 26/35 Automatic Lathe. Operator's Instruction andService Manual with Electrical Drawings.

MD40A DANOBAT Danomatic- 42 Automatic Lathe. Operator's Instruction and ServiceManual with fold-out Sectional Parts and Electrical Drawings.

MD40B DANOBAT Danomatic- 63 Automatic Lathe. Operator's Instruction and ServiceManual with useful Sectional Drawings.

MD40C DANOBAT Danocopy- 63 Copying Lathe. Operator's Instruction, Service andParts Manual with Exploded Component and Sectional Drawings.

MD40D DANOBAT IMEMATIC-50 Automatic Turret Lathe. Operator's Instruction andService Manual.

MD40E DANOBAT "Dano 2 and 3" - SINUMERIK System 3 with MemoryDisplay. Operator's Instruction Manual.

ME565 DANOBAT (ESTARTA) 301 Centreless Grinder. Parts Manual as SectionalDrawings and a set of electrical schematics. The parts section is incompleteand in poor condition but the drawings are readable.

MD45 DANISH MANCHINERY COMPANY Huron 230 Lathe (Danish Machine Tool Co.)Operating Instructions with an electrical schematic. DANISH TEXT.

MD50 DARENTH Universal Clarifiers10-Hundred Series. Installation and Operator's Instruction Manual. English,French and German Text.

MD55 DAREX SP2000 and SP2500 Drill Sharpener. Operator's Instruction Manual.

MD60 DASHIN Champion Lathe (Colchester Triumph copy made in Taiwan) Operator'sInstruction and Maintenance Manual with Parts as Exploded Component Drawings.

MD60A DASHIN Prince Lathe. Operator's Instruction and Maintenance Manual with Electrical Schematic and Parts as Exploded Component Drawings.

MD70 DATA DYNAMICS ZIP-30-KSR and ZIP-30-ASR Paper Tape Punch and Reader Unit.Operator's Manual.

MD70A DATA DYNAMICS ZIP-585/EIA Paper Tape Punch and Reader Unit. Operator'sManual.

MD76 DAVENPORT Model B 5-spindle Automatic Lathe. Operator's Instruction andMaintenance manual with many useful Sectional Drawings.

If not listed below we have access to a large range of David Brown gear HobbingManuals. Please e-mail your requirements :tony@lathes.co.ukor phone: 01298-871633 09:00 to 23:00

MD80 DAVID BROWN No.7 Hydrax Gear Hobber. Operating Manual.

MD80A DAVID BROWN No.7 High Production Gear Hobbing Machine. Operating Manual.

MD80B DAVID BROWN MT-15 (covers MT-V as well). Operating Manual.

MD80C DAVID BROWN Gear Roll Testing Instrument with Graphic Recorder.Instructions and Data.

MD80D DAVID BROWN MT30 Gear Hobber Operating Instructions.

DAVID DOWLING Pantograph Machines - see under DOWLING

MD90 DAVIS (Stuart Davis) 418 Cylindrical grinder. Operator's Instruction andMaintenance Manual.

MD90A DAVIS (Stuart Davis) Fine Boring Machines - all Models FB1, FB2 and FB3.Instruction Manual with electrical diagrams.

DEAN, SMITH and GRACE - If your lathe is not listed below a manual may still beavailable. Phone: 01298-871633

D20A DEAN, SMITH & GRACE Centenary Booklet 1965. Detailed description ofthe Company's development. Includes a comprehensive factory tour showing theentire production process from casting to final testing. 60 pages.

MD100A Dean, Smith and Grace Type A and B lathes from the lathe 1930s and intothe 1940s (marked variously as A, B, 4AN, 4AV, 4BN, 4AB, 4BR, 4AR, 4ABR, 4BDR,4BZ, etc). These lathes have simple lever control of spindle speeds andscrewcutting gearbox changes. Rather basic Instruction Book with Threading andSpeed Charts and Clutch Adjustment details plus a splendid Catalogue (June1948) showing the Model A & B lathes in all their configurations.

MD100C Dean, Smith and Grace Type 13Z and 13ZH "Minor" lathes as madeduring the 1940s. Two publications in one. Simple Instruction Books withScrewcutting Charts and clutch-adjustment instructions. Includes a copy of theinteresting and detailed Maker's Sales and Specification catalogue.

MD100G Dean, Smith and Grace Lathes Types 13, 13-1, 13-30, 13-42 and 16SB.Instruction, Maintenance, Adjustment and Illustrated Parts Manual. Includes anelectrical schematic and a copy of the maker's comprehensive Technical Salesand Specification catalogue (Model 13 x 30 and 42).

MD100H Dean, Smith and Grace Type 15, 17 and 17T (toolroom version) Lathes: Acomplete data pack for these popular lathes: Operator's Instruction andMaintenance Manual - three editions in one covering both early and late models,their different gearboxes and the special features of the 17T together with aSales and Specification and Accessories Catalogue.

MD100J Dean, Smith and Grace Lathes Type 16SB. Instruction, Maintenance,Adjustment and Illustrated Parts Manual (Model 13 x 30 and 42).

MD100K Dean, Smith and Grace Type 18 and 21 Lathes: Operator's Instruction andMaintenance Manual.

MD100Q Dean, Smith and Grace Lathes Type 20SB and 24SB Surfacing & BoringLathes. Instructions, Maintenance, Adjustment and Illustrated Parts Manual.

MD100PP Dean, Smith and Grace Lathes Type 25P. Instructions, Maintenance,Adjustment and Illustrated Parts Manual.

MD100R Dean, Smith and Grace Lathes Types 22, 25, 26, 30, 36XS, 36/4, 30XS,36LD & 36XS. A composite, 3-edition Instruction Manual, Maintenance,Adjustment and Parts Manual as Sectional Drawings.

MD100S Dean, Smith and Grace Lathes Type 30TC Numerically Controlled Lathe.Instruction, Maintenance, Adjustment and Parts Manual (Model 13 x 30 and 42).

MD100SP Dean, Smith and Grace Lathes Type 30P Lathe. Operation and Maintenancemanual and Parts as sectional drawings.

MD100S Dean, Smith and Grace Lathes Type TC1. Operator's Instruction manualwith GE 1050T Control.

MD100T Dean, Smith and Grace Lathes Types 1307. Instructions, Maintenance,Adjustment and Illustrated Parts Manual.

MD100U Dean, Smith and Grace Lathes Types 1609. Instruction, Maintenance andAdjustment manual and Illustrated Parts Manual as sectional drawings. Includesa copy of the comprehensive 28-page Sales and Technical SpecificationCatalogue.

MD100V Dean, Smith and Grace Lathes Types 1609 Spare Parts Manual. Alternativeversion as clear Exploded-component Drawings.

MD100W Dean, Smith and Grace Lathes Types 1709. Instruction, Maintenance,Adjustment and Illustrated Parts Manual.

MD100X Dean, Smith and Grace Lathes Types 1910, 1910-TNR and 2112.Instructions, Maintenance, Adjustment and Illustrated Parts Manual.

MD100Y Dean, Smith and Grace Lathes Types 1810. Instructions, Maintenance,Adjustment and Illustrated Parts Manual.

MD100Z Dean, Smith and Grace Lathes (Monarch) Type 2112CT. InstructionMaintenance, Adjustment and Illustrated Parts Manual.

MD101 Dean, Smith and Grace Lathes (Monarch) Type 2415. Instruction andMaintenance Manual.

MD101A Dean, Smith and Grace: Hydraulic Copying: a descriptive InstructionManual showing the principles and methods used in the DSG system.

MD101B Dean, Smith and Grace 24-inch Lathe: Operator's Instruction andMaintenance Manual.

MD101C Dean, Smith and Grace 17" x 60", 80", 108" (alllengths) Lathe: Operator's Instruction and Maintenance Manual.

MD101D Dean, Smith and Grace 21 x 84 Lathe: Operator's Instruction andMaintenance Manual.

MD101E Dean, Smith and Grace High-speed Threading Attachment for Hydraulic Copying Operator's Instruction Manual.- includes the Hydraulic Copy Attachment Instructions.

MD217 Deckel "SOE" and "SO" Tool and Cutter Grinders - acomplete Data Pack that includes all available printed material: early and latemanuals for the simpler "SO" Model together with the full Manual forthe more complex and versatile "SOE". Also included is the specialDeckel publication "SO Model: Notes on Disassembly and Reassembly - SpareParts (as sectional Drawings)", a copy of the maker's comprehensive Salesand Accessories Catalogue and all the extracts from the "Deckel TechnicalBulletins" that dealt with these machines. Very comprehensive instructionsinclude cutter profiles, tool angles, cutting speeds, how to grind back rackangles, pointed cutters, tapered cutters, twist-drill grinding attachment,single lip cutters, grinding straight-toothed cylindrical or tapered two-lip orthree-tooth cutters with concentric or off-centre radii. etc. English text.

MD217G Deckel SO Tool and Cutter Grinders: Operating and Maintenance Manual.German Text.

MD217GF Deckel GSO & SO Deckel La Fraise a une Coupe: Son Affutage et SesApplications: Pour la gravure, le Copiage, le Fraisage de Moules & leFraisage de Poincons. Pas un manuel d'instruction mais exte détaillé et bienillustré.

MD217BBK Tool & Cutter Grinding Book: - to assist beginners withcutter-grinding operations we can also supply a copy of the very useful andclearly-explained Workshop Practice Series book No. 38. See also: books

MD217AS Deckel SO Tool and Cutter Grinder:(Alexander GHA Clone) Parts Manual asdetailed Cross-Sectional Drawings. This edition Includes both Mk.1 and Mk.2(early and late) cabinet and bench-mounting machines. Includes the useful anddetailed technical Sales and Specification Catalogue.

MD217B Deckel SO Tool and Cutter Grinder: Detailed Technical Sales andSpecification Catalogue (included in MD216A).

MD217D DECKEL S1 Tool and Cutter Grinder Detailed Operating and MaintenanceInstructions.

MD217E Deckel S11 Tool and Cutter Grinder Detailed Operating and MaintenanceInstructions.

MD217F Deckel S11 Tool and Cutter Grinder Parts as Exploded Component Drawings.

MD218 DECKEL FP1 Universal Precision Miller Mk.1 . Operator's Instruction andMaintenance Manual (including accessories) for the early model with demountablechange-gears to vary the table-feed rates and levers for the spindle speeds.Contains essential horizontal and vertical bearing adjustment Manual. Althoughan English-language edition, a couple of German-text pages have crept in aswell. This early manual was rather thin so also included is the much morecomprehensive manual for the Mk.2 machine with all-lever gear changes and anadditional 16 pages from the Deckel Technical Bulletins concerning work on theFP1.

D40 DECKEL FP1 Miller early Sales and Specification Catalogue for the"Lever-change" model. Not a Manual, but a very useful 52-pagepublication that shows, using superb photographs, the extent of the FP1's versatility.

MD218DATA Both MD218 and D40 together as a data pack:

MD218A DECKEL FP1 Universal Precision Miller Mk. 2 - with all-lever speedchanges for both head speeds and table feeds. Detailed Operating, Maintenanceand Dismantling Manual (including accessories) - Available in English, Swedishor German. Includes an additional 16 pages from the Deckel Technical Bulletinsconcerning work on the FP1.

MD218B DECKEL FP1 Universal Precision Miller MK. 3 later "All-Dial-changeModel" Detailed Operating, Maintenance and Dismantling Manual (includingaccessories) - in English. This is the complete, later edition with extra pageson adjusting and dismantling the special boring and high-speed heads. Includesan additional 16 pages from the Deckel Technical Bulletins concerning work onthe FP1.

MD218C DECKEL FP1 Universal Precision Miller Dial Type. Parts Manual asDetailed Sectional Drawings.

MD218CA DECKEL FP1-2102 (with Heidenhain TNC113 controller) Parts Manual asexploded Component Drawings.

D40A DECKEL FP1 Miller late Sales and Specification Catalogue for the"dial-change" model. Not a Manual, but a very useful 52-pagepublication that shows, using superb photographs, the extent of the FP1'sversatility.

MD218D Deckel "CLONE": SUPERUNIVERSAL Model 675 a Russian-built copyof the DECKEL FP1 Universal Toolroom Miller. Comprehensive Manual withElectrical Schematics and Sectional General Sectional Drawings.

********************************

DECKEL FP2 - two versions were made: one with the motor flange-mountedexternally against the rear face of the column and another with the motorinside the column (and so not visible). Operating Manuals and Parts Manuals areavailable for each type.

MD218EX DECKEL FP2 Universal Precision Miller with externally-mounted motor.Detailed Operating, Maintenance and Dismantling Manual (including accessories)- English Text. Includes a copy of the detailed, profusely illustrated and veryinteresting 40-page FP2 Sales, Technical Specification and AccessoriesCatalogue.

MD218EINT DECKEL FP2 Universal Precision Miller with internally-mounted motor.Detailed Operating, Maintenance and Dismantling Manual (including accessories)- English Text. Includes a copy of the detailed, profusely illustrated and veryinteresting 40-page FP2 Sales, Technical Specification and AccessoriesCatalogue.

MD218GEXT DECKEL FP2 UniversalPrecision Miller with externally-mounted motor. SPARE PARTS as SectionalDrawings with English annotations.

MD218GINT DECKEL FP2 UniversalPrecision Miller with internally-mounted motor. SPARE PARTS as a mixture of 3Dsections, cross-sectional and annotated drawings with listings in GERMAN (thisappears to have been the only edition issued).

********************************

MD218F DECKEL FP2 DetailedOperating, Maintenance and Dismantling Manual (including accessories) - GERMANTEXT.

MD218H DECKEL FP2 UniversalPrecision Miller. SPARE PARTS as SECTIONAL DRAWINGS with GERMAN TEXT.

MD218NC Deckel FP2-NC Programming Manual and handling the Control Unit with introductory Technical Specification Section that includes data on Transport and Assembly Preparatory Operations, Measuring System and Manually-controlled Operation.*********************************

MD218J DECKEL FP3 Universal Miller.Comprehensive Machine and Accessories Operator's Instruction and MaintenanceManual (including accessories).

MD2218K DECKEL FP3 Universal Miller. Parts Manual as Exploded ComponentDiagrams.

Deckel FP3A: this is the model with two motors on the back of the column(one for the main drive the other a servo controllingthe powered table feeds) and a remote control panel at the side. Three manualsare available:

DECKEL FP3A Universal Miller. Comprehensive Operator's Instruction andMaintenance Manual for the conventional (non-CNC type) including accessories.

MD218JA2DECKEL FP3A Universal Miller fitted with straight Line CNC 2102 Control and nohand feeds. Comprehensive Operator's Instruction Manual that explains thecontrol and measuring systems and how to programme the controls.

MD218JA3 DECKEL FP3A Universal Miller. Spare Parts Manual for the conventional model asExploded Component Drawings.

MD218L DECKEL FP3L Universal Miller. Comprehensive Operator's Instruction andMaintenance Manual with Dismantling Instructions and Parts as ExplodedComponent Drawings (including accessories).

MD218FP3NC Deckel FP3NC & FP4NC Spare Parts Manual as Sectional Drawings.

MD218M DECKEL FP4(M) Universal Miller. Detailed Operator's and MaintenanceManual including a section on the accessories. 280 pages. With English andGerman Text

MD218N DECKEL FP4(M) Universal Miller. Illustrated Parts Manual as SectionalDrawings and Exploded Diagrams plus Electrical Schematics.

MD218MA DECKEL FP4MA Universal Miller with GRUNDIG CNC Contour 2 Control.Comprehensive and detailed Operator's and Maintenance and Lubrication Manualwith details of hand ling the Control Unit/Program-controlled operation,working with attachments, basic programming procedures, etc.

MD218M4 DECKEL FP41NC and FP42NC Miller with Continuous Path Control.Operator's Manual.

MD218CNC DECKEL CNC2101 Straight Line Control Unit. Programming Manual

MD218NG DECKEL Grinding Head for FP and LKD Machines. Operator's Manual.

MD218G1 Alexander (George Alexander GHA) Pantograph Engraving and Die-SinkingMachines Nos. "1", "1A", "1B", "1-2","2", "2A", "2B" and "3A" and 3 Series.These engravers were copies of contemporary Deckel machines - all based on theDeckel G1L. Detailed Operator's Instructions with sectional drawings of all thecutter heads (these have been scanned at high resolution and enlarged tofull-page size). This large 140-page triple-edition Manual also covers:"All multi-head and special types of GHS Engraving machines" - forexample, the Model 1-2 was a 2B but fitted with a slightly smaller table,pantograph and spindle for undertaking finer work. This collection representsall known literature for these models and includes a very useful and detailedSales and Specification and Accessories Catalogue with information aboutSpecial Machines, Type Sets, Etching Pencils, Rotary Engraving Attachments,Cutter Grinders, Cutter Microscope, Stylus, Collets and Cutters and workexamples.

MD218P Deckel GK12 and GK21 Pantograph Engraving and Profiling Miller:Operating, Servicing, Lubricating and Disassembly and Reassembly Instructions.Includes a copy of the maker's useful 20-page Technical Sales and Specificationand Accessories Catalogue.

MD218R Deckel GK12 and GK21 Pantograph Engraving and Profiling Miller:Operating, Servicing, Lubricating and Disassembly and Reassembly Instructions;includes a copy of the maker's useful 20-page Technical Sales and Specificationand Accessories Catalogue.

MD218V DECKEL KF1, KF2, KF2S and KF12 Universal Pantograph Die Sinking and CopyMilling Machine. Operator's and Maintenance Manual with Lubricating and someDisassembly and Reassembly Instructions.

MD218W Deckel KF1, KF2, KF2S and KF12 Universal Pantograph Die Sinking and CopyMilling Machine. Parts Manual as Sectional Drawings. Includes a copy of thedetailed and interesting KF-Series Sales, Specification and AccessoriesCatalogue.

MD218S DECKEL KF Series UniversalPantograph Die Sinking and Copy Milling Machines Sales and SpecificationCatalogue - being a comprehensive and detailed examination of the variousmodels' construction and operation - and employment of accessories. A veryuseful adjunct to the Instructions and Illustrated Parts Manuals listed above.

MD218W DECKEL KF3S Universal Copy Milling Machine (with hydraulic ServoControl). Operator's Instruction, Maintenance and Disassembly Instructions.

MD218X DECKEL PATTERN FORMING ATTACHMENT for the KF Series (KF2, KF2S and KF3S)Pantograph Die Sinking Machines. Detailed Instruction and Maintenance Manual.

MD218Y DECKEL LKB OPTICAL COORDINATE BORING MACHINE: Operating and MaintenanceManual with Dismantling Instructions.

MD218Z DECKEL LKS OPTICAL COORDINATE GRINDING MACHINE: Operating andMaintenance Manual with Dismantling Instructions.

MD218ZC Deckel Die-Sinking and Engraving machines. Detailed Sales andSpecification Catalogue for the identical English models badged"Alexander. Not a Manual but contains useful operating data, charts anddetails of accessories and how to mount them - includes two additional separateSales and Specification sheets.

MD218ZR Deckel Roll Engraving Attachments. Operating Instructions.

MD210 DECKEL TECHNICAL BULLETINS - The COMPLETE SET from the 1950s to the1970s. Detailed and incredibly useful advice - based on customer feedback -about getting the best from a wide range Deckel machine tools: Millers,Pantograph Engravers, Profiling Millers, Tool and Cutter Grinders, KF DieSinking machines, etc. Wonderful photographs and diagrams. 400 pages.

MD211 DECKEL "CNC CONTOUR 1". Operator's Briefing Cards (56) showingall control functions.

MD211A Deckel E3L and E3LV NC Milling and Boring machines with Straight LineControl and C3LV and C3L with Continious Path Control Operator's Manual.

MD211B Deckel E3L CNC Miller Parts Manual. Not a perfect copy but complete withwiring schematics.

MD270 DEDTRU Centreless grinding Fixture. Instruction Manual.

MD281D SUPERUNIVERSAL Model 675 (675 "11") a Russian-built milleralong the lines of the DECKEL FP1 Universal Toolroom Miller. ComprehensiveManual with Electrical Schematics and Sectional General Sectional Drawings.
MD290 De-HYDRAULIC Slotter 12-inch and 36-inch stroke Models. Installation,Operator's Instruction and Service Manual with Parts as Sectional Drawings.Includes an electrical schematic.

MD290A De-HYDRAULIC Slotter 36-inch and 48-inch stroke Models. Installation,Operator's Instruction and Service Manual with Parts as Sectional Drawings.Includes an electrical schematic.

MD290B De-HYDRAULIC Open-sided Planer Installation, Operator's Instruction andService Manual with Parts as Sectional Drawings. Includes an electricalschematic and a comprehensive Sales and technical Specifications catalogue.

MD290C De-HYDRAULIC 12-inch Shaper. Installation, Operator's Instruction andService Manual with Parts as Sectional Drawings. Includes a wiring diagram.

MD295 DEKA DRILL (South Bend) Models 171 and 1222. Operation and Parts Manual.

MD300A DELAPENA Delapena "Speedhone" Precision Honing Machines andmanual types - a Data Pack including:. General Operating Manual. Includes adata manual giving Recommended Honing Speeds and Honing Stone Pressurestogether with a large collection (60 page)of sales and Technical Specificationcatalogues covering the types: "Speedhone" Junior; VHM/1, VHM1D,VHM/3C. VHM60, HHM/11, HHM/30, Model 276 Beam Stroking Honing Machine; Model301, VHM/1, VHM/1D, VHM/3, VHM/3C, VHM/5, VHM60, VHM/60 and HHM/11 and the 276Industrial Beam honer, etc.

MD300B DELAPENA Speedhone MA Bench-mount Precision Honing Machine. OperatingManual together with a copy of "Delapena Recommended Honing Speeds& Honing Stone Pressures" and two Technical Specification Sales& Accessories Catalogues .

MD300C DELAPENA AUTO-SPEEDHONE. Instruction and Maintenance Manual.

MD300D DELAPENA 301 Honing Machine. Instruction and Maintenance Manual withElectrical Schematic.

MD300E DELAPENA HHM/1A Honing Machine. Instruction and Maintenance Manual withElectrical Schematic.

MD300F DELAPENA VHM/3M Honing Machine. Instruction and Maintenance Manual withElectrical Schematic.

MD300G Delapena VHM-18 Honing Machine. Instruction and Maintenance Manual witha pair of large, original, wiring and hydraulic schematics. Includes a copy ofthe booklet: "Delapena Recommended Honing Speeds & Honing Stone Pressures"

MD300H DELAPENA VHM/40 Honing Machine. Instruction and Maintenance Manual withElectrical Schematic.

MD300J DELAPENA Large Horizontal Honing Machines - all models Instruction andMaintenance Manual with Electrical Schematic.

MD300K "Delapena Recommended Honing Speeds & Honing StonePressures" - a useful booklet that helps to get the best from any make ofhoning machine.

MD302 DELCAM DUCT5 CNC System. Two Manuals: one a detailed set of TrainingNotes and the other an Intermediate Course.

MD305 DELTA (Italy) LA300, LB300, LF350 and LC400 vertical Surface Grinders.Basic Operator's Instruction and Maintenance Instructions including parts asSectional Drawings an Electrical Schematic (10 pages) . English, Italian,French and German Text.

DELTA ROCKWELL U.S.A. - and ROCKWELL DELTA

MD310 DELTA ROCKWELL 10-inch Lathe (Rockwell) Instruction Book, MaintenanceManual and Exploded Parts Diagrams. Includes a picture of thefrequently-damaged screwcutting and lubrication chart, a number of useful andwell-illustrated dismantling procedures and a copy of the Maker's Sales &Specification and Accessories Catalog.

MD311 DELTA ROCKWELL 11-inch Lathe (Rockwell) Instruction Book, MaintenanceManual and Exploded Parts Diagrams. Includes copies of the Maker's Sales,Specification and Accessories Catalog and the Screwcutting & Feeds Chart.

MD312 DELTA ROCKWELL 14-inch Lathe (Rockwell) Instruction Book, Maintenance andRepairs Manual, Exploded Parts Diagrams and a 14-page Maker's Sales andSpecification and Accessories Catalog. Included is a set of the rare"Special Attachment" Booklets that were not printed in the StandardManual:
Detailed 9-page Instruction Booklet for the Taper-turning Attachment withIllustrated Spares list.
Detailed 13-page Instruction Booklet for the "Safety Spindle Brake"with "Electrical Disconnect and Start Switches".
Detailed 10-page Instruction Booklet for the Single-speed Electrical DrumSwitch, Overload Switch and Magnetic Starter Controls.
Detailed 8-page Instruction Booklet for the Power-driven Spindle-speed Changer.
Detailed 5-page Instruction Booklet for the Hand -lever Collet Closer Assemblyand Collet Rack.
1-page Instruction Sheet for the Collet Draw Bar.
Detailed 2-page Instruction Booklet for the 4-position Carriage Stop.
Detailed 2-page Instruction Booklet for the Tachometer Fitting.
The 14-inch Manual together with the "Special Attachments Set" .

MD312A DELTA ROCKWELL 14-inch lathe - basic manual with Exploded PartsDiagrams.

MD312A DELTA ROCKWELL 14-inch lathe - "Special Attachments" Sectionon its own

MD313 Delta Rockwell Millers: Vertical, Horizontal and Horizontal with VerticalHead. Combined Manual for the Models 21-100 Horizontal, 21-120 vertical and21-122 Combination Horizontal and Vertical. Also covers the 52-020 and 21-820versions - but not the latter's variable-speed table drive system. InstructionManual, Maintenance Manual, Exploded Parts Diagrams, several detailedelectrical diagrams and copies of two Sales, Technical Specification &Accessories Catalogs.

MD314/MA640 DELTA ROCKWELL SHAPER (also sold branded as the Ammco). Operator'sInstruction, Maintenance Manual and a copy of the comprehensive Sales andSpecification Catalog. Two editions of the manuals are included, one withExploded Component Parts Drawings and the other with sectional and cut-awaydrawings.

MD315 Delta Wood Turning. Excellent 64 page book titled "Getting the Mostout of Your Lathe" - covers all the elements of Woodturning from thesimple to the advanced with chapters on basic metal turning and spinning.Includes a detailed 5-page technical Sales and Specification and Accessoriescatalogue for the 46-305 and 46-310 models and a manual showing how to assemblethe stand and countershaft. Applicable to any wood lathe, not just Delta.

- MD321 DELTA SHAPER 16-inch. Operator's Instruction, Maintenance and ExplodedAssembly Diagrams.

MD322 DELTA TOOL and CUTTER GRINDER. Model 24-822: Instruction and MaintenanceManual.

MD323 DELTA Double-ended 10-inch Grinder. Instruction Book and Parts asSectional Drawing.

MD324 DELTA 10-inch Contractors Saw Limited Edition. Model 36-426. InstructionManual and Parts List as exploded Component Diagrams.

MD325 DELTA 10-inch Contractors Saw with 30" Unifence. Model 34-445.Instruction Manual and Parts List as exploded Component Diagrams.

MD326 DELTA SUPER 10 Motorised Saw. Model 34-740. Instruction Manual and PartsList as exploded Component Diagrams.

MD327 DELTA 10-inch Right Tilting Arbor Saw (and Special Edition Unisaws).Model CS-4K-14. Instruction Manual and Parts List as exploded ComponentDiagrams.

MD328 DELTA Sidekick Frame and Trim Saw. Model 33-060. Instruction Manual andParts List as exploded Component Diagrams.

MD329 DELTA Sidekick Builders Saw 8.25". Model 36-275. Instruction Manualand Parts List as exploded Component Diagrams.

MD330 DELTA Builders Saw 8.25". Model 34-330. Instruction Manual and PartsList as exploded Component Diagrams.

MD331 DELTA 10-inch Table Saw. Model 36-550. Instruction Manual and Parts Listas exploded Component Diagrams.

MD332 DELTA UNISAW with 52" Unifence. Model 36-841. Instruction Manual andParts List as exploded Component Diagrams.

MD333 DELTA UNISAW with 50" Commercial Biesemeyer Fence System. Model36-843. Instruction Manual and Parts List as exploded Component Diagrams.

MD334 DELTA Deluxe Uniguard. Model 34-976. Instruction Manual and Parts List asexploded Component Diagrams.

MD335 DELTA Dust Collector/Sweeper. Model 50-075. Instruction Manual and PartsList as exploded Component Diagrams.

MD336 DELTA Sidekick Frame and Trim Saw. Model 33-060. Instruction Manual andParts List as exploded Component Diagrams.

MD337 DELTA Sharpening Centre. Model 23-710. Instruction Manual and Parts Listas exploded Component Diagrams.

MD338 DELTA DC-33 13" x 5.9" Planer. Models 22-660, 22-661 and22-671. Instruction Manual and Parts List as exploded Component Diagrams.

MD339 DELTA 6" Motorized Jointer. Model 37-280. Instruction Manual andParts List as exploded Component Diagrams.

MD340 DELTA DJ-15 6" Jointer. Model 37-150. Instruction Manual and PartsList as exploded Component Diagrams.

MD341 DELTA Vertical Bandsaw. Model 28-340 with 20-inch capacity. InstructionManual with Parts as Exploded component Pictures.

MD341A DELTA 12" Vertical Bandsaw. Model 28-190. Instruction Manual andParts List as exploded Component Diagrams.

MD341B DELTA 14" Vertical Bandsaw. Models 28-293 and 28-299. InstructionManual and Parts List as exploded Component Diagrams.

MD341c DELTA 20" Vertical Bandsaw. Models 28-340. Instruction Manual andParts List as exploded Component Diagrams.

MD341cc DELTA 20" Vertical Bandsaw. Models 28-365 and 28-366 (Metal andWood capability). Instruction Manual and Parts List as exploded ComponentDiagrams.

MD342 DELTA 8" x 14" Horizontal Bandsaw. Model HBS-6. InstructionManual and Parts List as exploded Component Diagrams.

MD342A DELTA Horizontal Bandsaw Model 7V. Instruction Manual and Parts List asexploded Component Diagrams.

MD342B DELTA Horizontal Bandsaw Model 10-Standard and 10A Automatic.Instruction Manual and Parts List as exploded Component Diagrams.

MD342E DELTA Horizontal Bandsaw Model 12A (sometimes labelled) InstructionManual.

MD344 DELTA 12-inch Variable-speed Wood Lathe Models 46-700 Bench and 46-701Floor-standing. Detailed Instruction and Maintenance Manual with Parts as ExplodedComponent Drawings. In English or Spanish.

MD344A DELTA 16-inch Variable-speed Wood Lathe. Model 46-745. InstructionManual and Parts List as Exploded Component Diagrams.

MD344B DELTA Wood Turning Duplicator Attachment Model 46-408 to fit the Delta12-inch and 16-inch lathes. Detailed Instruction Manual and Parts List asexploded Component Diagrams.

MD348 DELTA 13-Spindle Line Boring Machine. Model 32-325. Instruction Manualand Parts List as exploded Component Diagrams.

MD349 DELTA 13-Spindle Pneumatic Line Boring Machine. Model 32-326. InstructionManual and Parts List as exploded Component Diagrams.

MD350 DELTA 14", 16" and 18" Long Arm Radial Saws. Models33-400, 33-401, 33-402, 33-403, 33-410, 33-411, 33-412, 33-413, 33-420, 33-421,33-422, 33-423. Instruction Manual and Parts List as exploded ComponentDiagrams.

MD351 DELTA SIDEKICK 10" Mitre Box. Model 36-210. Instruction Manual andParts List as exploded Component Diagrams.

MD351A DELTA SIDEKICK 10" Motorized Mitre Box. Model 36-090. InstructionManual and Parts List as exploded Component Diagrams.

MD353 DELTA Plate Joiner. Model 32-100. Instruction Manual and Parts List asexploded Component Diagrams.

MD354 DELTA 14" Abrasive Cut-off Saw. Model 20-150. Instruction Manual andParts List as exploded Component Diagrams.

MD355 DELTA Drill Press Oscillating Spindle Sander Attachment. Model 17-960.Instruction Manual and Parts List as exploded Component Diagrams.

MD356 DELTA B.O.S.S. Bench Oscillating Spindle Sander. Model 31-780.Instruction Manual and Parts List as exploded Component Diagrams.

MD357 DELTA 4" Belt/6" Disc Sander. Model 31-460 Type 2. InstructionManual and Parts List as exploded Component Diagrams.

MD357A DELTA 6" Belt/9" Disc Sander. Model 31-460 Type 2. InstructionManual and Parts List as exploded Component Diagrams.

MD358 DELTA Platinum Edition 2-speed Heavy-duty Wood Shaper. Model 43-424.Instruction Manual and Parts List as exploded Component Diagrams.

MD359 DELTA Stock Feeders. Model 36-851 single-phase and Model 36-852three-phase. Instruction Manual and Parts List as exploded Component Diagrams.

MD360 DELTA Mortising Attachment. Model 17-905. Instruction Manual.

MD361 DELTA Mortising Attachment. Model 17-905. Instruction Manual.

MD362 DELTA TENONING Jig Model 34-182. Instruction Manual.

MD363 DELTA 10-inch Double-ended Grinder. Instructions, Electrical Diagrams andParts.

<![if !supportEmptyParas]><![endif]>

MD368 DEMOOR LATHES for all Typefrom 821 up to 827 including the older Models: 613, 513, 614, 615, 615H, 711,811, 712, 812, 624, 625, 626 and 627: Installation, Operator's Instruction andMaintenance Manual with Headstock, Gearbox, apron and slides as SectionalDrawings.

MD369 DENBIGH 3E, 4E and 5E Gear-head drills (the Victoria/Elliott type).Operating and Maintenance Manual and Illustrated Spares Manual.

MD369A DENBIGH C-Type Milling machine. No proper manual was produced for thismachine but the makers issue three drawings: a large General Arrangement with asectional drawing through the horizontal spindle and with parts annotated on asecond sheet. A Drawings showing the lubrication requirements and one withsections showing the necessity of removing the table winding hand le duringcertain operations. The drawings plus a sales and Technical Specificationcatalogue:

DENFORD - see also under VICEROY

MD370 DENFORD EASITURN 3 Lathe. Installation, Programming and MaintenanceManual.

MD370A DENFORD ORAC CNC Lathe. Installation, Programming and MaintenanceManual.

MD370AT DENFORD ORAC CNC Lathe. TEACHER'S Manual. Introduction, NC Control and Machine Tool Functions, The co-ordinate system of an NC machine tool,Programming Principles in ORAC Format, ISO Codes and Addresses, Tool Setting and Tool Offsets, General Review of NC Programming.

MD770B DENFORD STARTURN CNC LATHE Programming, Instruction and MaintenanceManual:

MD370C DENFORD TRIAC CNC Milling Machine. Comprehensive Instruction andMaintenance Manual:

MD370D DENFORD ZEROTURN Service Manual:

MD370E DENFORD ZEROTURN Lathe. FANUC OT-Model. Operator's Manual.

MD370E2 DENFORD ZEROTURN Lathe. FANUC OTC-Model. Detailed Operator's and Service Manual with Parameters.

MD370G DENFORD CYCLONE FANUC OT Programming Manual:

MD370H DENFORD QUATROMILL (Heidenhain 355) Operator's Instruction and ServiceManual.

DENFORD: See also under VICEROY

MD372 DENHAM JUNIOR Lathe: Operator's Hand book and Parts Manual as ExplodedComponent Drawings - includes a copy of the maker's Sales and Specification andAccessories Catalogue.

MD372A DENHAM SR8V, SS8, SR10 & SR10V Lathe: Installation, Operator'sInstruction and Maintenance Manual with Sectional Parts diagrams. Includes acopy of the Sales and Specification Catalogues.

MD372B DENHAM BV and L Lathe: Installation, Operator's Instruction andMaintenance Manual with Sectional Parts diagrams.

MD372C DENHAM "SUPER" LATHES Models BV, BV-L, SR18: ShortInstallation, Operator's Instruction and Maintenance Manual.

MD375 DENISON Universal Testing Machines (Avery-Denison) Models: T42B3, T42B4,T42C1 and T42C2. Detailed Instruction Manual with electrical schematics. Includes operating and Maintenanceinstructions for the variable delivery hydraulic pump, SupplementaryInstructions for the hydraulic system and instructions for the lever-operatedwedges.

MD375-2 Desoutter Machines: Service Instructions and Parts as clear Exploded-Component Drawings for the: Oscillating Saw Type DG.0S; High-speed Electric Drill Gun Type D.G.500 and Parts Drawings and Dismantling Instructions for the Types 2SA8 and 2000L, PAI/S, M224/L, SA8/500/L, M217/s

MD376 DEUTSCHE NORMEN Tutormill "0" Universal Milling Machine. SlimOperator's Instructions with Electrical Diagrams.

MD377 DeValliere H140E Precision lathes. Instruction and Maintenance Manual.English Text

MD377A DeValliere H130F Precision lathes. Two editions of the Instruction &Maintenance Manual. One brief, the other more detailed with a Parts Manual asSectional drawings, Electrical Schematics and a copy of the maker's TechnicalSpecification & Accessories catalogue. French Text. This is aless-than-perfect copy but still readable and useful.

MD379
DeVLIEG B-Series Spiramatic Jigmils: 2B, 3B, 4B, etc. In order to cover all themodels this publication is made up of several editions including those for the2B, 3B, 4B, etc. in various capacities. Installation, Operator's Instructionand Maintenance Manual together with a Parts Manuals as detailed SectionalDrawings. Electrical Diagrams and sample Inspection and Tolerances Test ResultsSheets. This is a complete Data Pack with 375 sheets containing all knownpublications for the DeVlieg Type B.

MD379A
DeVLIEG 3H Series SPIRAMATIC JIGMIL Installation, Operator's Instruction andMaintenance Manual. Covers all 3H versions, No. 3H-48, 3H-60, 3H-72, etc.

MD379B
DeVLIEG No. 3H and 43H (all types and sizes) Parts Manual as detailed SectionalDrawings - includes a detailed, multi-page wiring diagram. These have beenscanned at very high resolution, enlarged for perfect clarity and spread over389 sheets.

MD379C
DeVlieg K-Series Jigmil: Installation, Operation and Maintenance Manual. Thisis the much larger and highly detailed edition covering: specification,description, Installation and preparation for operation, operating the Jigmil,Maintenance, tool changer, accessories, arrangement drawings, electrical system(but not circuit diagrams), DC Drive Jigmils. Covers all K Models 3K-72, 3K-60,4k-72, 4K-50, 4K-60, 4K-72, 5K-60, 5K-72, etc, where the first digit is thespindle diameter and the second number the table length).

MD379D
DeVLIEG K-SERIES JIGMIL - PARTS MANUAL as Detailed Sectional Drawings. Inaddition to the major parts it also includes sections on Hydraulic Schematics,Bar-feed Unit,Electric Controls, Spindle Head Elevating Units and the FeedUnit, Table Unit, Saddle Unit and Coolant Unit. Covers all K types. e.g. 3K-72,3K-60, 4k-72, 4K-50, 4K-60, 4K-72, 5K-60, 5K-72, etc. where the first number isthe spindle diamter and the second the table length.

MD379DK DeVlieg "Contouring K" a Supplement to the K Series Manual. Operation, Maintenance and Parts as Sectional Drawings. Includes Hydraulic Schematics.

MD379E
DeVLIEG J-Series Jigmil. Detailed Installation, Maintenance and Parts Manual(the latter as sectional drawings). Includes several Hydraulic (but notelectrical) schematics and details of the CNC Systems details in 3 Sections:Description, Computer and Interface and Magnetics. The full manual as issuedwith new machines.

MD379F
DeVLIEG RELIANCE Spindle Drive MaxPak-Plus VS W/D 27940 19 to 70 Amps and WD29741 70 to 250 Amps Installation, Operating and Maintenance Instructions withelectrical schematics.

MD379F2
DeVLIEG RELIANCE 15-hp Machine Tool Spindle Drive as used on Devlieg Machines.Detailed Technical Specifications, Operating Notes and set-up Instructionstogether with 26 Electrical Schematics.

MD379F3
DeVLIEG RELIANCE 40 h.p. S6R Drive as used on Devlieg Machines. DetailedTechnical Specification, Operating Notes and set-up Instructions together with26 Electrical Schematics.

MD379G
DeVLIEG 4K-60 with TAPAC 5 Control: Programmer's and Operator's ReferenceManual.

MD379H DeVlieg Tape Dialin (Herbert) Electrical Systems Manual with 19 Electrical Schematics. As used on the DeVlieg Jigmil Models 2B, 3H, 43H and 4k

MD379X DeVLIEG MARK CENTURY CNC 2000 Section 6 MSD Parameters. (see alsoGeneral Electric section below)

MD379TC
DeVlieg Micropoint Tool Grinder Operator's Instruction Manual with a PartsManual as Sectional Drawings. Includes a copy of the Makers Sales &Technical Specification Catalogue. sh

MD380 DeWalt 1370 Radial Arm Saw. Operation, Adjustment, Maintenance &Spare Parts Manual as Exploded Component Drawings together with a number ofElectrical Schematics. Multi-language edition in English, Italian, French,German and Dutch.

MH381/330D DHW 4-jaw wood-working chuck - as used on Hobbymat and other lathes.Operator's Instruction Manual in German but with useful Sectional andillustrative Drawings

MD382 DIAFORM Wheel Dressing Attachments A Complete Guide to the Diaform unitand how to employ it successfully. English and french text.

MD383 DIAFORM Wheel Forming Attachment Vertical Models A, B, AT, BT, 2A, 2B, 3A, 3B, 4A, Rand 4B Operating Manual. English and French Text. (with a detailed guide, inEnglish only, as to what the machine can achieve with illustrated examples ofwork) and copies of the maker's Sales & Specification Catalogues.

MD383B DIAFORM Models 5/1, 5/2 and 5/4 Series. Grinding Wheel Forming Machine.Wheel-head mounting type. A complete Data pack consisting of two editions of theOperating Manual - covering any changes - together with a copy of the DiaformBooklet "Form Dressing with the Diaform Wheel Forming Attachment" (adetailed guide to the what the machine can achieve with illustrated examples ofwork)

MD383S Diaform Servicing and Adjustment Manual for Vertical Types A, B, AT, BT, 2A, 2B, 3A, 3B, 4A, Rand 4B. Includes several useful sectional drawings.

MD383D DIAFORM-KREMER 100 Control Instruction Manual. Includes ProgrammingExamples for lathes and millers.

MD384 DIAG HF-3.9 Milling Machine with Programme Control. Operator'sInstruction and Maintenance Manual with Electrical Schematics.

MD386/MH380B DIAL-SET Unit for Turret lathes. Detailed Operator's Instructionand Maintenance Manual with Parts Manual as Sectional Drawings.

MD388 DIEDESHEIM FRONTOR 40. Front-Operated Semi-automatic Chucking Lathe.Installation, Operating and Maintenance Manual with Electrical Schematics andBlueprints. 0

MD388A DIEDESHEIM LS5A Installation, Operating and Maintenance Manual with manylarge drawings and Electrical Schematics. 0

MD388B DIEDESHEIM LSA-6 Horizontal Automatic Multi-Unit Machine. OperatingInstructions with Installation, Operating and Maintenance Manual withElectrical Schematics.

MD388C DIEDESHEIM/NECKAR AMSI Armature Machine. Operating and MaintenanceManual.

MD392 DIGIPAC 3 (by Newhall) Operator's Handbook.

MD392A DIGIPAC 4 (by Newhall) Users' Guide Handbook.

MD392B DIGIPAC 5 (by Newhall) Users' Handbook.

MD392D DIGIPAC 3 Cassett Unit (by Newhall) Operating Instructions

MD393 Diprofil hand-held Filing Unit - flexible-shaft driven from an electric motor. Detailed, 50-page Operating Manual with many suggestions for successful use.

MD394 DIVIDING: How to use a Dividing Head. A set of clear instructions, basedon the Myford unit but applicable to any make, showing how to use the platesand position the sector arms, etc.

MD396 DIXI Precision Lathe. Operating Instructions (brief, 7 pages) togetherwith a well-illustrated 16-page Sales, Specification & AccessoriesCatalogue.

MD396A DIXI 60 Jig Borer. Installation, Levelling, Functions, OperatingInstructions, Adjustments, Lubrication and an Electrical Schematic.

MD410 DUMBAR & COOK Mark 2A Crankshaft Lathe. Operation Manual.

MD400 DUMORE Milling Attachments. Operation & Parts Manual. Two editionsincluded covering the models 8349 (with twin round column supports) and the 312- arranged as a conventional vertical milling slide.

MD450 DUNMORE Drill Press Series 16 Operating Instructions.

MD450A DUNMORE Feed Drill Series 60 Operating Instructions.

MD450B DUNMORE Hydraulic Feed Control Types 508-0065. Operating Instructions.

MD450C DUNMORE Toolpost Grinder Series 12 Operating Instructions.

MD450D DUNMORE Toolpost Grinder Series 14 Operating Instructions.

MD450E DUNMORE Toolpost Grinder Series 25 Operating Instructions.

MD450F DUNMORE Toolpost Grinder Series 44 Operating Instructions.

MD450G DUNMORE Toolpost Grinder Series 57 Operating Instructions.

MD500 DUPLEX Toolpost Grinders Models: D22A, D22A/3, D27A, D27A/3, D28, D29.D30, D30A, D31, D31A, D31B, D34, D35, D70, D71, D72, D73. Includes Duplex BuiltCollace M34, M36 and Wolf-Duplex GL3. Instruction Manual and three detailed technical-specificationcatalogues.

MD500A DUPLEX Shears & Nibblers: Shears types: G1, G2, G3, 10, G16, GS10,GS16, GS18 B12 and B15. Nibblers Types: N1, N3, N10, N18, N12 and N20.Operation Instructions and Parts as a Sectional Drawing.

MD555 DUPLOMATIC "FILEMATIC 50 and FILEMATIC 100" High-speedautomatic lathe threading attachment: Instruction Manual and Exploded-PartsDiagrams. Includes a copy of the useful Technical Sales and SpecificationCatalogue and a set of can charts.

MD555A DUPLOMATIC Type "T" all sizes TRACER (Hydraulic copying unit)Instruction Manual and exploded-parts Diagrams.

MD555B DUPLOMATIC TA/20 TRACER (Hydraulic copying unit) Detailed InstructionManual and exploded-parts Diagrams.

MD555B2 DUPLOMATIC TA/20/1 TRACER (Hydraulic copying unit) Operation andMaintenance Manual and Parts as Exploded Component Drawings.

MD555C DUPLOMATIC TA "COMPACT SERIES" Hydraulic Copying Unit.Detailed setting up and Maintenance Manual with Parts Manual as explodedcomponent diagrams.

MD555D DUPLOMATIC - (BSA) BSV-N-120/Baureihe Series 24, BSV-N-160, BSV-N-200 and BSV-N-250. FastIndexing Heads. Instructions for Use and and Maintenance with Assembly Drawingsas Sectional Diagrams. English and German Text.

MD555E DUPLOMATIC (BSA) TRM-N-120/20, TRM-N-160, TRM-N-200 Vertical Axis Toolholders. Operating & Maintenance Instructions with Sectional Drawings. English & German Text.

MD570 DYNA (Dyna Myte Electronics) DM2400 and DM2200 Milling Machine.Programming Manual

MD600 DYNAFLEX LAPPING MACHINES 12A and 15B. Instruction and MaintenanceManual.

MD600A DYNAFLEX LAPPING MACHINES 30B and 40A. Instruction and MaintenanceManual.

ME5/E20 EAGLE SURFACE GRINDERS: Unfortunately no manual appears to have beenissued for these machines but there is an interesting collection of Sales andSpecification Catalogue available for the early and late Standard and HeavyDuty Models 1, 2, 2a, 3, 3A, 4, 4A, 5, 6; the Model 534 in Mk.1 and Mk.2versions together with a price list. This collection represents the completedata set for these machines. 13 pages.

ME10 EAM (Electronic Autosizing Metrology) Gauge Head Models ECM/50/CS andElectronic Unit DS4R/ES and DS2R/ES. Operating Instructions.

ME10A EAM (Electronic Autosizing Metrology) Metran Model 2001 Electronic Gauging & Control Apparatus. Operating Instructions with Electrical Schematics.

ME12 EBOSA M31 & M32 High-precision Turning and Thread-chasing machine.Operation and Maintenance Manual with Parts as Exploded Component Drawings andan Electrical Schematic. Also included is a separate Manual "Instructionsfor the Calculation of Cams and Standard Chucks"

ME12A Ebosa: Parts book for the Ebosa S.A. Grenchen M-32 Turning and ThreadChasing machine. With instructions for making cams, including a section ofcharts for the determination of degrees of non-productive travels. Alsoincludes drawings of fittings, toolholders, regulating devices for cuttingtools, cam drawings, dimensions and positions of cam levers for cams, manytables including those for micro-stop setting pin positions, turning feeds inmillimetres per rev, recommended cutting speeds and worked examples. English,French and German text. .00

ME15 EB Machine Tools: See H.E.B. (H. ERNAULT-BATIGNOLLES) below

ME20 ECKOLD Kraftformer Piccolo - Sheet Metal Forming Machine. WorkingInstructions with Sectional Drawings, an electrical Schematic and a useful andvery detailed 44-page Catalogue of Forming Tools and Spares.

ME20A ECKOLD Kraftformer KF 6533 CVA - Sheet Metal Forming Machine. WorkingInstructions with Parts as Sectional Drawings, a large Electrical Schematic anda useful and very detailed 44-page Catalogue of Forming Tools and Spares.

ME20B ECKOLD Mobilformer - Sheet Metal Forming Machine. WorkingInstructions with Electrical Parts as Sectional Drawings and details of the Power Units Type HAT 400 and HAT 550.

ME25 ECLIPSE Magnetic Chucks (rectangular and circular). Very detailed User'sHand book describing correct operation, setting up jobs, holding awkward jobs,machining forces, installation, construction, Maintenance, etc.

ME50 EDBRO 12 TON PRESS: User Instructions and Maintenance.

ME50A EDBRO Standard Hydraulic Cropper Model No. 2: Operator's Instruction andMaintenance Hand book.

ME50 EDELESTAAL MACHINEX 5 - See under MACHINEX

ME60 EDGWICK 61/2" Lathe Mk.1 Operator's Instruction and MaintenanceManual with Electrical Diagrams and Parts Manual as exploded componentdrawings. Includes a copy of the maker's Sales, Technical; Specification &Accessories Catalogue.

ME60A EDGWICK 61/2" Lathe Mk.2 Operator's Instruction and MaintenanceManual with Electrical Diagrams and Parts Manual as exploded componentdrawings. Includes a copy of the maker's Sales, Technical; Specification &Accessories Catalogue. This lathe can be seen here

ME60B EDGWICK Face Cutter Grinding Machine: Operator's Instruction Manual.

ME60C EDGWICK Face Cutter Grinding Machine: Parts Manual as Exploded ComponentDiagrams.

ME60D EDGWICK Tool and Cutter Grinder. Parts as Exploded Component Drawings.

ME60F EDGWICK SIMPLIMEL No.1 Parts as Exploded Component Pictures.

ME60G EDGWICK (Herbert) Type 1214-HY Injection Moulding Machine. Detailed Operator's Manual with sectional drawings anda 29-page Manual and Service Information for Vickers-Detroit Vane Type Pumps and the Balanced Piston Hydrocone Type Relief Valves.

ME65 EDL VFM-1 Vacuum Forming Machine. Operator's Instruction Manual.

EDWARDS and BESCO Machines can be hard to recognise as a specific model. If youare unsure what you have email: manuals@lathes.co.uk

ME71M EDWARDS TRUECUT DD (Direct Drive) Guillotine Models. A complete data packwith Operator's Instructions, Maintenance and Spare Parts as Exploded ComponentDrawings. Covers early and late examples (two manuals are included) and thedifferent drive systems of the 2.5/1250, 2.5/2000, 2.5/2500, 2.5/3000,3.25/1250, 3.25/2000, 2/3000 2.5/2500, 2.5/3000, 2.5/3600 etc. - alsoapplicable to the 3/125, 4/125, 5/125 and 6/125 models (3, 4, 5 and 6 feet widewith 1/8" capacity) and the metric equivalent models. Includes wiringdiagrams for the UK, European and American markets and Instructions for theStandard, Precision and Power Back Guage Assemblies.
Also available separately, if required, large drawings of the DD covering: BackGauge; Front Gauge, Installation, General Arrangement, General Arrangement ofthe Hold Down Pneumatic Lift Off, Electrical blue print.

ME70 EDWARDS "BESCO" Besco Universal Edging, Bending and FoldingMachines. Instructions for adjusting and operating with exploded componentsdrawing. (2 sheets)

ME70B EDWARDS "BESCO-TRUEFOLD" Folders. Because a number of modelswere produced a complete Data Pack has been gathered for these types consistingof: Operation and Maintenance Manuals covering the Light Type, Heavy Type, Boxand Pan Folder Models 218, 316, 416 and 616 and the Box Pan and StraightFolding Machines Mk.2. Includes two maker's Sales and Specification Catalogues.

ME70C Edwards Besco All-Steel Folding machine Mk.2 Recognisable by the twooval-shaped, heavy weights supported on rods at each end of the machine.Operating instructions.

ME70D EDWARDS BENDING ROLL TRH/26. Instruction Manual with large SchematicDrawing and Parts List.

ME70E EDWARDS BENDING ROLL ESMB. Instruction Manual with large InstallationDrawing and Parts List.

ME71F EDWARDS "BESCO-TRUECUT" 698 Guillotine. Instruction Manualincluding Parts Listing and 6 Blueprints.

ME71G EDWARDS "BESCO-TRUECUT" 4/08, 3/08 to 10/25 Electro-MechanicalGuillotines. Two Instruction Manuals including Parts Listings, Mechanical andElectrical drawings and the Warner Clutch Service Instructions.

ME71H EDWARDS "BESCO-TRUECUT" 4/125 Guillotine. Instruction Manualincluding Parts Listing, 2 large General Arrangement Drawings, ElectricalSchematic and the Warner Clutch service Instructions.

ME71J EDWARDS "BESCO-TRUECUT" 808 Guillotine. Instruction Manualincluding Parts Listing and a blueprint showing the "Key Drawings"referred to in the Manual.

ME71K EDWARDS "TRUECUT" SHEARING MACHINES Models 2.5/1250, 2.5/2000,2.5/2500. 2/3000, 3.25/1250, 3.25/2000, 3.25/2500, 3.25/3000, 3.25/3600:Operator's Instruction and Service Manual with a wiring diagram.

ME71K EDWARDS Pearson. Late-type "TRUECUT" SHEARING MACHINES Brand edwith a "600 Group Logo) Models from 2/3000 to 4/4000 for Europe and 14GAto 8GA for North America. Detailed Operator's Instruction and Service Manualwith Parts manual as Exploded Component Drawings.

EE = "ESTARTA Y ECENARRO" = see under "ESTARTA"

ME75 EECO Spool Mate SMS9150 Tape reader. Instruction Manual.

ME90 EFI "FG" Drilling Machine. Operating and Maintenance Manual withElectrical Diagram and Parts Manual as Sectional Drawings. English and GermanText.

ME94 EGURO Super-Precision Miniature screwcutting lathe: Operator's InstructionManual.

ME96 EINELL MTB300 Mini Lathe (sometimes badged 7" x 12"). Operator'sInstruction and Service Manual with Parts as Exploded Component Drawings.

ME97/MR752 EHJ-58 Milling Machine (a re-badged Thiel Duplex 58) Operation &Maintenance Manual with detailed and useful sectional drawings and ElectricalDiagrams (German text only). Includes copies of the only two knownEnglish-language Sales and Technical Specification Catalogues - an additional18 pages.

ME97R EIMELDINGEN Rotary Table Type WSEE 8-8820 Operating Instructions. Includesa manual for Heidenhain ROD-700 Incremental Encoder.

ME97R2 EIMELDINGEN Rotary Table Type WGE 12-1250 Operating Instructions.Includes a manual for Heidenhain ROD-700 Incremental Encoder,

ME400SEMI-MEC equipped Herbert Auto 2D lathe: Complete Service Manual.

MF10ZM FANUC 10/100 Series, 11/110 Series and 12/120 Series Maintenance Manual(700-pages).

MF11 FANUC Tape-Cut T1 (with OM-A) and T3 (with OM-A) Titled "MaintenaceDrawings" which are electrical systems

MF11A FANUC PMC-Model I and PMC-Model J Programming Manual (LADDER language).

MF11APCL FANUC PMC-Model I and PMC-Model J Programming Manual (PASCALlanguage).

MF11A1 FANUC PMC Models. These were sold using older and newer Model Names: SB5(old name RB5); SB6 (old nameRB6); SC (old name RC); SC3 (old name RC3); SC4(old name RC4); NB and NB2. Also covered are the Models P and Model NA.Programming Manual.

MF11KK FANUC PMC-Model K, Model L and Model M Programming Manual (Ladderlanguage)

MF11A2 FANUC Model A and T Series 16i, 18i, 21i, 160i, 180i, 210i. ConnectionManual (the manual describes all the NC functions required to enable machinetool builders to design their CNC machine tools. Includes: General features ofthe functions, Signals, Parameters, Alarms and Messages, Reference Items.

MF11A3 FANUC Series 16i, 160i, 160is-MB. Series 18i, 180i, 180is-MB5. Series 18i, 180i, 180is-MB. Two-volume Operator's manual. 1230 pages.

MF11B FANUC Series 15-MA, Series 15-MF and Series 150-MA Operator's manual.

MF11C FANUC 10TA and 11TTA Programming Manual.

MF11D FANUC Series 15 and Series 150 Operator's Manual.

MF11E FANUC 200 A/B Operator's Manual.

MF11F FANUC 2000C Operator's Manual.

MF11G FANUC Series 16i, 18i, 21i, 160i, 180i, 210i Model A. Connection Manual(Hardware).

MF11H FANUC PC Series Electrical Schematics Manual

MF11H FANUC Series 16, 18, 160, 180 Model B. Connection Manual - Hardware.

MF11J FANUC Series 16, 18, 160, 180 Model B. Connection Manual - Function.

MF11K FANUC Robocut Alpha Series OC & 1C Maintenance Manual

MF11L FANUC Robdrill Alpha-T14iA Maintenance Manual

MF11M FANUC Tape Cut Model O, P, Q, R Electrical Drawings Manual.

MF11N FANUC System 5D, 5T and 5M Principle of Operation Manual

MF11P FANUC

MF11Q FANUC VC45 11MF Machine Operation Manual.

MF11R FANUC AC Spindle Motor Series. Operator's Manual

MF11S FANUC EYE - Visual Sensor System - detailed Descriptions and Functions

MF14 FAT WROCLAW (WAFUM) lathes: see entry under "Wafum"

FAY Automatic Lathes - see also under Churchill Fay.

MF15 FAY Automatic Lathes - all types. General Instruction Manual.

MF16/ML8 FAYSCOTT Land IS "Land is Chainstich McKay Sticher" Model77. Operator's Instruction and Maintenance Manual and Parts as PhotographicPlates.

FEEDMASTER CNC Bar Feeds Unit. Operator's Instruction Manual with electricaland pneumatic circuits.

MF17 FEINMECHANIK Tool and Cutter Grinder (DECKEL). Maintenance Manual withParts as Sectional Drawings and notes on Disassembly and Reassembly.

MF17A FEINPRUF Millipneu Surface-finish Comparison Guage Models: 1020, 1040,1060, 1022, 1024, 1062 and 1064. Operator's Instructions.

MF17B FEINPRUF Millitron Nr. 1222, 1224, 1226 und 1228. Bedienungsanleitung und Elektrischer Schaltplan(Operation Manual) German text.

<![if !supportEmptyParas]><![endif]>

MG58P Fischer-Brodbeck Hydraulic Fibrotakt Indexing Table No. B14.002-o Operating and Servicing Instructions with electrical diagram, a section titled ""The Febrotakt Electrical System" and a large layout drawing. As the drawing is large, this manual is supplied as PDF.

MG58P2 Fischer-Brodbeck Hydraulic Fibrotakt Indexing Table No. MY 11.K500 x 500 Operating and Servicing Instructions with electrical diagrams and two large "layout" drawings. As the drawings are large, this manual is supplied as PDF.

MS218Flexispeed, Perris and Norfolk, Hector, Simat 101, Meteor, Meteor 2, Perris andDerivatives. A complete 150-page Data Pack containing everything ever publishedfor these miniature lathes: Sales and Specification Sheets, Illustrated PartsManuals, sheets of Assembly Instructions for the Perris version and theFlexispeed, Simat and Meteor. A separate 5-page Manual for the Meteor 2 is alsoincluded. Full-size "blue print" (in sections) and an additional8-page Mk. 1 Sales and Specification and Accessories Catalogue together withspecification and price lists from the 1970s.

MF62 FLORIN MANUMOLD Plastic Injection Moulding Presses. Installation andOperating Instructions with Servicing of Plasticing Cylinders, details of the Temperature ControllerType 3-M.1569, Safety Instructions, Recommened Lubricants and several sheets of drawings showing Moulds of the Simple Ejector, Percussion,Ejector with Spring Retrun, Ejector with Stripper Plate, Split Taper Jaws, Self-degatings type, etc, and the Maker's Technical Specification Catalogue.

MF68 FLUIDAIR COMPRESSORS SR60, SR80, SR100, SR177, S2R66H and S2R110H.Operating and Maintenance Instructions.

MF68A FLUIDAIR COMPRESSORS SR250 and R270. Operating and MaintenanceInstructions with wiring diagrams.

MF69 FMB Mini Turbo "S" Automatic Bar Loading Magazine. OperatingInstructions.

MF69A FMB Turbo Automatic Round Bar Loading Magazine. Parts Manual as SectionalDrawing with Parts Descriptions.

MF69B FMB Turbo 5-42 (Citizen B12, L20, L25, L16/20 and E20/32) ElectricalCircuit Diagrams.

MF70 MF40 FOBCO DRILLS. There never was a "Manual" for theFOBCO" drills but we have put together an "Guide to Dismantling"for the "STAR", together with a collection of Technical SalesCatalogues and Sectional Parts Drawings for all models will be helpful ownersof the 1/2" and 7-Eight and ten/eight models.

MF71 Foden 6-cylinder Marine Generator Sets. Operator's Instruction Book withMaintenance Schedule.

MF72 FORADIA GH 50/1000 and GR 50/1200 Operator's Instruction Manual withSectional Drawings.

MF74 FORMECH Vacuum Forming Machines: Booklet giving General Information onOperation, Choices of Plastic, Checklist for Moulds, Common Problems, MouldMaking, Venting, Mould Release, Finishing, Paint Spraying, Flocking, SkinPacking, Blister Packing. Includes a sheet of Dismantling Instructions for the300X and a Sales and Specification Sheet for the same machine.

FORGES De GILLY - see under " FG"

MF76 FORSYTH VO50 and V50 Presses. Instruction Manual.

MF78 FORTE 250 Bandsaw. Operating Manual, Maintenance and Spare Parts Manual asSectional Drawings.

MF78A FORTE "Fortemat" BA251 Automatic Bandsaw. Operator'sInstruction and Maintenance Manual and Spare Parts Manual as SectionalDrawings. Includes two electrical diagrams.

MF78C FORTE "FORTEMAT" SBA240/1V Bandsaw. Instructions andMaintenance Instructions, Spare Parts Manual as Sectional Drawings, Electricaland Hydraulic Diagrams and Operating Instructions and Parts List for the StoberVariable-Speed drive unit.

MF85 Fortis (a re-badged Clausing) 100 Series and 4800 Series"12-inch" (6-inch centre height) Lathes. Three Instruction andIllustrated Parts Manual (with detailed Cross Sectional Drawings and explodedillustration) that cover all variants of these early lathes from the 100 Modelof 1938 to the renamed machine (Series 4800) of 1952 - and to the last versionsmade in 1964. Includes an additional 36 pages of Clausing Sales, Specificationand Accessories literature and a copy of the rare Fortis Sales andSpecification Catalogue.

MF90 FORTUNA AFB-A and AFB-AM (AFB-300 Finimag). Operator's Instruction andMaintenance Manual

MF90A FORTUNA ME200 Cylindrical Grinding Machine. Operator's Instruction andMaintenance Manual

MF90B FORTUNA SE 300-400 Cylindrical Grinder (Rundschleifmaschinen) Operator'sInstruction and Maintenance Manual. GERMAN TEXT.

MF95 FRASER and Fraser Arbroath Endomatic Facing Machines - see under ENDOMATIC

MF97 FRATELLI GRISETTI Hydraulic Universal Grinding Machine. Operation Manual with a Parts and Accessories Manual as detailed and very clear Sectional and Exploded-componet Drawings. Includes an Electrical Schematic.

MF97AFratelli Grisetti RU/AUSR Grinder Spare Parts Manual as exploded component drawings.

MF100 FRAY Milling Machines and Attachments: Illustrated Parts Manual,Specifications Instruction Manual. Slender but useful 22 page publication.

MF105 FREDDY Oil/Water Separator. User's Manual (English, French, German andSpanish text).

MF108 FRENCO SH450 Involute and Helix Gear Testing Machine. Operator's Manual.

FRITZ WERNER - see under WERNER

MF110 Fromag Keyseating Machine Types "Rapida" Operator's Instructionand Maintenance Manual. Contains pages marked for the 50/425, 63,/425 &63/600 but covers how to operate of all sizes of this type: 50/425, 70/600,70/750, 100/600, 100/750 and 100/1000. Includes 4 electrical schematics.

MF110A FROMAG Keyseating and Broaching Machines Rapida and Combi-Rapida 70/100.Operator's Instruction and Maintenance Manual with Electrical Diagrams andlarge Foundation Plan.

MF110B FROMAG Keyseating and Broaching Machines Types KZM 32 and 50/300.Operator's Instruction and Maintenance Manual with Electrical Diagrams andlarge Foundation Plan.

MF110C FROMAG Keyseating and Broaching Machines Types KZH50 and KZH 90.Operator's Instruction and Maintenance Manual with Electrical Diagrams.

MF110D FROMAG Keyseating and Broaching Machines Type KZ50. Operator'sInstruction and Maintenance Manual with Electrical Diagrams.

MF110E FROMAG Keyseating and Broaching Machines Type KZH70 and KZH100. Operator'sInstruction and Maintenance Manual with Electrical Schematic.

MF115 FRORIEP Vertical Turning Machines Type DS: Detailed Operator'sInstruction and Maintenance Manual.

MF115A FRORIEP Double Column Boring and Turning Mill Type 10KZ. OperationManual. Includes supplements for thread cutting, taper turning, pentagaonturret, copy turning and a manual for the ZF Clutches.

MF115B FRORIEP BFT 150-325 Horizontal Boring and Milling Machine. Detailed Operation and Maintenance Manual

MF120 FROUD Type G Hydraulic Dynamotor Engine tester. Operator's InstructionManual with Sectional Drawings.

MF125 FRY FLOWSOLDER MACHINE. Operator's Instructions with ElectricalSchematics and Sectional Drawings.

MF130 FUJI HYPOMATIC FS-Universal and Standard Lathes. Operator's Instructionand Maintenance Manual with Parts as Exploded Component Drawings.

MF130A FUJI FSR Lathe Instruction Manual and Parts as Exploded-componentDrawings.

MF140 FUM Lathes - See under POREBA

MF150 Shopsmith Mk.5 (and earlier) FUSSO Universal Woodworker - also badged as Fusso, Multico, Shopsmith, Teckney, Tyme, Total Shop, MasterShop, Master Woodcraft, SuperWoodBuilder, ShopCentre and SuperShop, etc. Data Pack with wwo Editions (early and late) of the Detailed Operator's Instruction Manuals with Parts as Exploded Component Drawings and a superby-illustrated Sales, Technical Specification and Accessories catalogue.

MF150A Shopsmith Mk. 7 Universal Woodworker. Data Pack with Operator's Instruction Manual, a Parts as Exploded Component Drawings, separate sheets of instructs for Assembling the Stand, the "Sawdust Collector and Under-table Saw Guard, "How to Replace a Poly-V belt" and "How to Replace the Control Sheave". Also included is a copy of the contemporary maker's Technical Sales and Accessories Catalog and a separate 8-page accessory catalog. 74 pages in total.

MF200 FV-320T Vertical Miller (copy of the Emco FB2) and Dividing Head/RotaryTable: Combined Operator's' Instruction Manual and Parts Manuals shown asuseful Exploded-component Diagrams. Includes a copy of the maker's Sales andSpecification and Accessories Catalogue. Includes details of both 4 and 6-speedversions. As this is an inadequate technical publication also included is acopy of the proper Emco FB2 Manual and Parts List.

MG230 GACK K15 "precision sliding head horizontal boring and millingmachine ("Kehlhobelmaschine") Instruction Manual (German text) andParts Manual as Sectional Drawings.

MG240 GALDABINI (Cesare Galdabini) Press Type RPR S/6. Operator's InstructionManual and Electrical Diagram.

MG250 GALEX (and Alexander) Hyrivet Hydraulic Riveting Machine. InstructionManual and Parts Manual as Exploded Component Drawings.

MG251 GALILEO (Officine Galileo Di Milano) A-200 Hardness Tester for Rockwell and Vickers Tests. Operation Instructions

MG252 GALLENKAMPH Muffle Furnaces Series FSE-621.Instruction Manual with Electrical Diagrams for the Models FSE-621-010L, FSE-621-110H, FSE-621-210D.

GALLIC Lathes - see under the manufacturer MONDIALE

GALLICOP and GALLIMAT Copy and Conventional) Lathes - see under the makerMONDIALE.

MG255 Gallmeyer and Livington (Grand RAPIDS) SURFACE GRINDERS Models 25, 28,35, 36, 38A, 45, 45A, 45B, 55, 55A, 55B, 65 and 65A. Operator's Instruction,Maintenance and Lubrication Manual. Includes a separate and detailedMaintenance and Parts Section for the Vickers Hydraulic pump and Instructionsfor the Rectifier and Control System for the Magnetic Chuck/Table. Additionalinstructions concern the preparation, truing and mounting of Magnetic Chucks.

MG255a Gallmeyer and Livington (Grand RAPIDS) Surface Grinders: Parts Manual asuseful Sectional Drawings. Covers models: 20, 25, 35, 36, 38, 38A, 35 thru 65A.

MG255b Gallmeyer and Livington (Grand RAPIDS) No. 5 Tool and Cutter Grinder:Parts as useful Sectional Drawings.

MG270 GALTONA Serrated Blade Cutters - Detailed Maintenance Guide to removal,remounting, adjustment of blades, re-grinding, relieving, etc.

MG280 GAMBIN 2251, 2253, 2254 Millers: Parts Manual as large and detailedSectional Drawings.

MG280A GAMBIN 2M Miller: Operator's Instruction and Maintenance Manual withcomprehensive dividing and spiral milling instructions and charts..

MG280B GAMBIN 3M Miller: Detailed Operator's Instruction and Maintenance Manualwith Electrical Schematic and toolling details.

MG280C GAMBIN F2N Miller: Detailed Operator's Instruction and MaintenanceManual.

MG280D GAMBIN 27S Miller: Operator's Instruction and Maintenance Manual -FRENCH Text only.

MG280E GAMBIN Dividing heads with division plates and gears. Operator'sInstruction Manual with comprehensive charts.

MG280F GAMBIN 3M Fräse. Bedienungs-und Wartungsanleitung. DEUTSCHER TEXT. 3MMilling Machine. Operation and Maintenance Manual. GERMAN TEXT.

MG283 GARDEM Meccancia SC-2-70 Lathe. Operation & Maintenance Manual with aParts Manual as Exploded Component Drawings. Includes a large ElectricalSchematic.

MG285 GARDNER: "Modern Methods of Gardener Grinding". Explanatory Bookletillustrating typical Gardener Disc Grinder jobs. 40 pages.

MG285A GARDNER 4V30T, 4V36T and 4V36R-36" Vertical Spindle Grinders.Operator's Instructions. Includes a copy of the maker's Sales and Specificationcatalogue. 1

MG287 GARFITT Lawn Mower grinder. Operator's Instructions.

MG90 GARSTON DUFOUR: see under DUFOUR

MG295 Gate 3S and 3VS Turret Miller. Operator's Instruction Manual and PartsManual as Exploded Component Drawings.

MG295B/MJ90 Gate Profitmil Vertical Turret Miller 4AS and 4AVS (also badged asthe Gate Profitmill and made by "Roundtop"). Operator's InstructionManual and Parts Manual as Exploded Component Drawings.

MG295C GATE Rigidturn Lathe Models 1810 and 2215 . Instruction Book and Partsas Sectional Drawings with Electrical Diagram:

MG295D GATE Profitdrill WR40 (radial arm type). Operator's Instruction andMaintenance Manual with electrical schematics:

MG295E/MG640A Gate (GIEWONT) TUTORMILL No. 1. (sometimes badged as a"Gate") Operator's Instruction and Maintenance Manual with ElectricalSchematic.

MG299 Gate Velox Hacksaw Models 7.5-inch, 10-inch and 12-inch. Operation, Maintenance and Parts Manul.

MG305 GAUTHIER GM75 Automatic Lathe (Prazisions Langdreth-Automat). DetailedOperation & Maintenance Manual with Electrical Schematics, numbers ofsectional drawings of component parts and explanations of their functions.Includes details of how to mount and use the various accessories. This editionappears to be the one issued for machines sold outside Germany with the maintext still in German but some English annotations on diagrams.

MG320 "GEARS" A Book of Reference for Engineers Concerned with theDesign, Manufacture, Application and Maintenance of Gear Drives. Acomprehensive publication covering the whole field of gear design andmanufacture. 420 pages.

G.DUFOUR = Gaston Dufour see under DUFOUR

For GEC FANUC - see under FANUC

MG350A GEC GEMINI 2, 4, 7 and 11 Thyristor Controlled Adjustable-speed drives.Operator's Instruction and Technical Manual with Electrical Schematics.

MG350B GEC GEMDRIVE Spindle Mk. 2 Operator's Instruction and Technical Manualwith Electrical Schematics. Manual Ref: 78208

MG350C GEC GEMDRIVE Spindle Mk. 2B Operator's Instruction and Technical Manualwith Electrical Schematics. Manual Ref: 78213

MG350D GEC GEMINI Single Phase Adjustable Speed, Half-controlled D.C.DriveModules. Technical manual.

MG355 GEE EDM500 Spark Erosion Machine (Glevum Electronic Equipment Ltd). Detailed Operator's Instructions.

MG358 GEHRING Type Z2 Honing Machine. Large Operation Manual with parts as Large Sectional Drawings. An original maker's Copy.

MG360 GEKA Hydracrop Croppings Machines. Operator's Instruction and MaintenanceInstructions for all models.

MG360A GEKA 11H Shearing machine. Operator's Instruction and MaintenanceInstructions.

MG360B GEKA Hydraulic Steelworkers for Cutting, Notching, etc. Models MicroCrop-36, Minicrop, HYD50, HYD-70, HYD100 and HYD150. Detailed Operating Instructions/

MG360CGEKA Hydraulic Punching Machines Types PU.MA.-50, PU.MA-70, PU.MA.-100, PU.MA.-150 and PU.MA.-200 Operator's Instructions.MG380 GEL Digital Readout Positioning System. Operator's Installation andOperator's Instruction Manual.

MG385/MC63 GEMDRIVE (CEGELEC) Gemdrive-Axis Mk.2SB Technical Manual.

MG385/MC63A GEMDRIVE (CEGLEC) Gemdrive 2000 for Models GD2004 and GD2070.Detailed Technical Manual.

GEMMO Machine Tools - see under SIMPLON

MG400 General Electric "STATOTROL 11" DC Drives Series: 3SFW, 3SFWB,3SFWC and 3SFWR. Instruction Book:

MG400-1 General Electric MARK CENTURY "One" CNC Operation and Part Programming Manual.

MG400A General Electric MARK CENTURY 550T Control Instruction Book (HardingeLathes)with tape reader information. Includes: Operating, Programming, Test andDiagnostics, etc

MG400B General Electric MARK CENTURY 550T Control Electrical Diagrams Manual.

MG400C General Electric MARK CENTURY 550TX Lathe Control Instruction Book withtape reader information. Includes: Operating, Programming, Test andDiagnostics.

MG400D General Electric MARK CENTURY 1050 Control: Comprehensive Operating andMaintenance Manual. Includes Programming, Options, Custom Features, Interface,Interpretation of Logic Diagrams, Diagnostic Software and HardwareTrouble-shooting, Alphanumeric Display, Tape reader, Position feedback Systems,Servos, Power supplies, etc. Manuals included are GEK-25260, 45670, 45691,45672, 45673, 45674, 45775, 45676,45680, 45681, 36040, 45563, 45650, 41565A,41565, 45618 (servos) 15178C, 15178, 36037, 36038 and 45611.

MG400DD General Electric MARK CENTURY Supplementary Diagrams - ElectricalSchematics for circuit boards starting 44CC3 - (Publication GEK-1510B - datedDecember 1974).

MG400F General Electric MARK CENTURY 1050 Control Electrical Circuits Manual No. GEK-25268B:

MG400E General Electric MARK CENTURY 2000 CNC Systems Communications Manual.(Publication No. GEK-25387A)

MG400E2 General Electric MARK CENTURY 2000 CNC Maintenance and TroubleshootingManual. (Publication No. GEK-25382)

MG400E3 General Electric MARK CENTURY 2000 CNC Start-up and Adjustments Manual.(Publication No. GEK-25381)

MG400E4 General Electric MARK CENTURY 2000 Control Descriptions Manual Thisnames the functions of each BCB and sub-assembly separately and states thelikely hardware source of three given problem symptoms.

MG400E5General Electric MARK CENTURY 2000 Connector and Cable Requirements forCustomer Cables.

MG400E6General Electric MARK CENTURY 2000 Part Programming Manual 2000MC CNC

MG400FGeneral Electric Numerical Contouring System Control 550TX Electrical SchematicManual. 370 pages

MG400YGeneral Electric 6V30F3333 Speed Variator Model for Valutrol Drives:Instruction Book.

MG400Z General Electric PWM Servo Drive. Operating and Maintenance Instructionswith Electrical Schematics.

MG450 GER (Jose Arocena Unzueta) Model C-1500 Cylindrical Grinder. Operator'sInstruction and Maintenance Manual with Parts as Sectional Drawings andElectrical Schematics. English Text.

MG450A GER (Jose Arocena Unzueta) Model C-1500 Cylindrical Grinder. Operator'sInstruction and Maintenance Manual with Parts as Sectional Drawings andElectrical Schematics. Spanish Text.

MG450B GER (Jose Arocena Unzueta) Model RHL-450 Cylindrical Grinder. Operator'sInstruction and Maintenance Manual with Parts as Sectional Drawings andElectrical Schematics. English Text.

MG450C GER (Jose Arocena Unzueta) RS-1500 Surface Grinding Machine: Maintenanceand Working Instructions. 20+ pages of instructions and several large-scalediagrams.

MG450D GER (Jose Arocena Unzueta) RA 2-N-450 Cylindrical Grinding Machine:Service Instructions with many detailed sectional Drawings.

MG450E GER (Jose Arocena Unzueta) RHC-450 Cylindrical Grinder: Operation Instructions with many detailed sectional Drawings.

MG458 Gerät Modul DBF (Modul DBF Gerät) Allzweck Kleinwerkmaschine (Multi-function Machine). Betrieb, Wartung und Katalogsammlung deutscher Text (Operation, Maintenace and Catalogue Collection with German text).

MG475 GERBER (Ernst Gerber) Monforts DA-400 Automatic Lathe (Chuckautomat)Operator's Instruction Manual - Swedish Text.

+GF+ Automatic lathes - see entry under "Fischer" above

GHA - see entry under 'ALEXANDER'

G-H Grinders - see below under GHIRINGELLI

MG500 GHIRINGHELLI and PISONI (GP) Centreless Grinders. A General Guide for allModels with work examples using infeed (plunge), overhang and through-feedmethods. Work supports, Lubrication recommendations, basic Maintenance, wheelbalancing, workrest height adjustment, grinding wheel changeover, grindingerrors and their likely causes, etc.

MG500A GHIRINGHELLI and PISONI (GP) M65, M100, M120, M200, M250, M2100Centreless Grinding Machines. Operator's Instruction and Maintenance Manual.English and Italian Text.

MG500B GHIRINGHELLI and PISONI (GP) M65, M100, M120, M200, M250, M2100Centreless Grinding Machines. Parts as detailed Exploded Component Drawings.

MG500C GHIRINGHELLI and PISONI (GP) M200 Mk.2 Centreless Grinding Machine.Instruction Book with electrical schematics.

MG500D GHIRINGHELLI and PISONI (GP) A45, A50, A60 and N170 Centreless GrindingMachines. Instruction Book with electrical schematics.

MG500E GHIRINGHELLI and PISONI (GP) Model 100 Type D1 + M.I.A. CentrelessGrinding Machines. Electrical Instruction Book with electrical schematics.

MG500F GHIRINGHELLI and PISONI (GP) Model A50 Type D1 Centreless Grinding Machine. Operation Manual.

MG500G GHIRINGHELLI and PISONI (GP) Static Electrical Converter (Convertitore Statico) Type D.I. + M.I.A. Model 200.Operation Instructions with Electrical Schematic and Component Details.

GIBAS - see entry under M.B.M.

MG620 GIDDINGS and LEWIS Model 825 Variax Milling Machine: Operator'sInstruction Manual and Illustrated Parts Manual with detailed Cross-Sectionalelevations of all components.

MG620A GIDDINGS and LEWIS 70A-Dp 4 and 5-T Horizontal Boring, Drilling andMilling Machines. Spare Parts Manual as Sectional Drawings.

MG620B GIDDINGS and LEWIS 330, 340, 350-F, 350-FQ and 360-F Floor Type Horizontal Boring,Drilling and Milling Machines. Two Manuals with Operating Instructions and Reassembly and Operation.

MG630/MP350 GIEWONT (Mechanicy Ponar-Komo) Mk. 3 Vertical miller. This was are-badged machine made by PRVOMAJSKA as the Models G-301A and G-301D.Operator's Instruction and Maintenance Manual with Electrical Schematics andParts Manual as detailed Sectional Drawings.

MG630A GIEWONT TUTORMILL No. 1. ( (Mechanicy Ponar-Komo) and sometimes badgedas a "Gate") Operator's Instruction and Maintenance Manual withElectrical Schematic.

MG630B GIEWONT (Mechanicy Ponar-Komo) FWA-32-M, FWA-41M, FYA-32-M and FYA-41-MMilling Machines. Service Manual with electrical schematics.

MG630C GIEWONT (Mechanicy Ponar-Komo) FWE-40 and FXE-40 Milling machines.Service Manual with electrical schematics.

MG628 GIOVANNI BREDA. See under "Breda" above.

MG631 GISHOLT "Masterline" Ram-type Turret lathe with Lynn HydraulicDrive: Service Manual with 75 pages plus 29 pages of Sectional Drawings.

MG631A GISHOLT No. 3, 4 and 5 Ram Type Turret Lathes: Service Manual withIllustrated Parts Manual and 27 pages of detailed Cross-Sectional Drawings.

MG631B GISHOLT "Simplimatic" Automatic Lathe. Instruction Book,Service and Maintenance Manual with Illustrated Parts Manual as Cross-SectionalDrawings.

MG631C GISHOLT No. 12 Hydraulic Automatic lathe. Service Manual, Installation,Adjustments and detailed Repair Parts Manual as Sectional Drawings. asCross-Sectional Drawings.

MG631G GISHOLT Dynetric Balancing Machine. Installation, Operation, Maintenanceand Repair Manual with Parts as Sectional Drawings. Includes Wiring Schematicsand a copy of a most useful book by Gisholt " Balancing Machines - theProblems of Balancing Rotating Parts".

MG631H GISHOLT 1L, 2l & 3L Turret Lathe. Operator's Instruction &Maintenance Manual with a Parts Manual as detailed cross-sectional drawings.

MG631Y GIUSTINA Type R-1 Rotary Surface Grinder (Vertical Axis). Spare Parts Manual as Clear Secional Drawings (Italian text). Includes a copy of the maker's Sales & Technical Specifcation Catalogue.

To check that this is yours,pictures and details on my web site here: http://www.lathes.co.uk/harrison/page5.html

<![if !supportEmptyParas]><![endif]>

MHL12A HARRISON Lathe early 13-inchswing model with a 6.5-inch centre height and recognisable by 2downward-pointing handles on the face of the headstock and a"diamond-shaped speed chart. Instruction Manual, Maintenance Manual andParts Manual as useful Exploded Assembly Diagrams. Perfect quality production.Includes a copy of the detailed Sales, Technical Specification &Accessories Catalogue An example of this lathe can be seen here: http://www.lathes.co.uk/harrison/page7.html

<![if !supportEmptyParas]><![endif]>

MHL13 HARRISON Lathe Model 12-inch and 13-inch swing L6 Mk. 2(also badged as the 155 and 165 and distinguishable from earlier models by aflat front face to the headstock, a third control shaft control rod below theleadscrew and power-feeds shaft, a screwcutting gearbox with a sliding selectorcontrol that indexed into a row of holes. The gearbox had either two thumblever along the top edge (English threading) or three thumb levers (metricversion). A long, single upward pointing handle on the face of the headstockand two spindle-speed change levers on the top.
Instruction and Maintenance Manual and Parts Manual as useful Exploded AssemblyDiagrams. Added to this publication (not in the original edition) is data aboutconverting the 3-lever metric box to inch screwcutting. Also Includes acomplete set of the maker's Sales and Specification and Accessories Cataloguescovering all years and models. To check if this is yours,pictures and details here: http://www.lathes.co.uk/harrison/page16.html You can order it securely on-line here: http://www.store.lathes.co.uk/print/MHLl13

and....

<![if !supportEmptyParas]><![endif]>

MHL190 Harrison "13-inch" and "15-inch" (identicalapart from centre height) and badged variously as: 155, 165, 190 and"1300". These very distinctive lathes differ from the other 155 and165 L6 Mk. 2 types in having the two spindle-speed levers pointing downwards onthe front face of the headstock (instead of on top), large embossed sheet-aluminiumcovers on the headstock and face of the apron and an enclosed screwcuttinggearbox operated only by rotary lever controls (no sliding, spring-loadedindent lever). Operator's Instruction Manual and Spare Parts Manual asSectional Drawings.

To check if this is yours, pictures and details of the lathe here: http://www.lathes.co.uk/harrison/page17.htmlYou can order it securely on-line here: http://www.store.lathes.co.uk/print/MHL190

<![if !supportEmptyParas]><![endif]>

and, a special version:

<![if !supportEmptyParas]><![endif]>

MHL190E Harrison "13-inch" and "15-inch" (identicalapart from centre height) and badged variously as: 155, 165, 190 and"1300". These very distinctive lathes differ from the other 155 and165 L6 Mk. 2 types in having the two spindle-speed levers pointing downwards onthe front face of the headstock (instead of on top), large embossedsheet-aluminium covers on the headstock and face of the apron. The screwcuttinggearbox was the earlier type with a sliding tumbler selector that indexed intoa row of holes.This manual consists of the two manuals above (MHL13 and MHL190)to cover the differences between the models. A picture is here http://www.lathes.co.uk/harrison/img119.jpgand you can order it securely on-line here: Harrison 14-inch

MHL15 Harrison Lathe 15 and 16-inch swing Models (L21). Covers both early"rounded style" 15-inch swing and the very similar early 16-inchswing models with two downward-pointing levers on the face of the headstock.Instruction Manual, Maintenance Manual and Parts Manual as useful ExplodedAssembly Diagrams. Perfect quality production. Includes a copy of the detailedSales, Technical Specification & Accessories Catalogue
Picture of the lathe here: Harrison 15-inch and16-inch older types

If you are not sure what model your Harrison is, just email photographs to: manuals@lathes.co.uk

MHL17A Harrison Lathe 17-inch swing (8.5" centre height) Very early modelwith round styling and three downward-pointing spindle-speed controls levers.Operator's Instruction Manual and Spare Parts Manual as detailed SectionalDrawings. Includes a copy of the detailed Sales, Technical Specification &Accessories Catalogue Perfect quality production.
Picture of the lathe here: Harrison 17-inch

MHL21A Harrison Lathe 21-inch swing(M500 in the UK) with 10.5" centre height). Operator's Instruction Manualand Spare Parts Manual as detailed Sectional Drawings and electrical schematic.Includes a copy of the detailed Sales, Technical Specification &Accessories Catalogue Perfect quality production.

MHL250 Harrison M250 Lathe Instruction Manual, Maintenance Manual and PartsManual as useful Exploded Assembly Diagrams. Includes electrical schematics.Includes a copy of the detailed Sales, Technical Specification &Accessories Catalogue

MHL250CNC Harrison TRAINER 250 CNC/Manual Lathe: Maintenance Manual and PartsManual as useful Exploded Assembly Diagrams. Includes a copy of the detailedSales, Technical Specification & Accessories Catalogue

MHL250CNC/B Harrison TRAINER 250 CNC/Manual Lathe: Programming Manual.

MLH280 HARRISON VS280 CNC Operator's Instruction Manual with Maintenance.

MLH280T HARRISON 280 Dual CNC/Manual Training Lathe. Comprehensive Operator'sInstruction, Maintenance and Programming Manual with Parts as ExplodedComponent Drawings and Electrical Schematic.

MLH280U HARRISON "TRAINER" CNC (enclosed model marked simply"TRAINER" on the headstock). Comprehensive Operator's Instruction,Maintenance and Programming Manual with Parts as Exploded Component Drawingsand Electrical Schematic.

MLH280V HARRISON V280 Variable-speed drive Lathe. Instruction Manual,Maintenance Manual and Parts Manual as useful Exploded Assembly Diagrams.

MHL300 Harrison M300 Lathe (and T300 the training version) Instruction Manual,Maintenance Manual and Parts Manual as useful Exploded Assembly Diagrams.Includes 3 electrical schematics (UK and USA)and a copy of the maker's TechnicalSales and Specification Literature.

MHL350 Harrison M350 Lathe Instruction Manual, Maintenance Manual and PartsManual as useful Exploded Assembly Diagrams with UK and European wiringdiagrams. Includes a copy of the maker's Technical Sales and SpecificationLiterature and electrical schematics.

MHL350V Harrison M350V Lathe (Variable-speed drive) Operation & MaintenanceManual with Parts Manual as Sectional Drawings. Includes two electricalschematics and a spindle drive electrical fault-finding guide. (This lathe is aColchester VS3250 with Harrsion badging).

MHLVS330 Harrison Lathe VS330TR ("AA") Lathe variable-speed drive:Instruction Manual, Maintenance Manual and Parts Manual as useful ExplodedAssembly Diagrams. Includes Electrical diagrams.

MHL390 Harrison M390 Lathe: Instruction Manual, Maintenance Manual and PartsManual as useful Exploded Assembly Diagrams. Includes electrical diagrams.

MHLV390 Harrison M390V Variable-speed Lathe: Instruction Manual, MaintenanceManual and Parts Manual as useful Exploded Assembly Diagrams.

MHL400 Harrison M400 Lathe: Instruction Manual, Maintenance Manual and PartsManual as useful Exploded Assembly Diagrams including details of the complex4-way toolpost, the optional bed-mounted capstan assembly, quick-threaderassembly, taper-turning unit and other accessories, etc. Includes 2 electricalschematics.

MHL450 Harrison M450 Lathe - early version, often badged "17-inch"and with headstock control levers tipped with round knobs): Instruction Manual,Maintenance Manual and Parts Manual as useful Exploded Assembly Diagrams with10 electrical schematics covering the various versions. This edition shows bothheadstock clutch/brake types.

MHL450L Harrison M450 Lathe - lateversion badged "450" and with headstock control levers as flat barswith rounded ends and an apron where the centre section is stepped. Usuallyfitted with black fascia plates on headstock face and apron: InstructionManual, Maintenance Manual and Parts Manual as useful Exploded AssemblyDiagrams with 10 electrical schematics covering the various versions.

MHL450CNC Harrison VS450 CNC Lathe:Operator's Instruction and Maintenance Manual including details of the FANUCControls and Programming Instructions.

MHL460 Harrison M460 and 550 Lathes: Instruction Manual, Maintenance Manual andParts Manual as useful Exploded Assembly Diagrams. This is large and detaileddouble manual covering the M460 and M550 models.

MHL500 Harrison M500 Lathe: Instruction Manual, Maintenance Manual and PartsManual as useful Exploded Assembly Diagrams with 3 electrical schematics.

MHL540 Harrison M540 Lathe: Instruction Manual, Maintenance Manual, ElectricalSchematics and Parts Manual as useful Exploded Assembly Diagrams.

MHL600 Harrison M600 Lathe (a re-badged Colchester "Magnum"):Instruction Manual, Maintenance Manual and Parts Manual as useful ExplodedAssembly Diagrams.

MHL750 Harrison M750 Lathe: Instruction Manual, Maintenance Manual and PartsManual as useful Exploded Assembly Diagrams.

MHL600 HARRISON 1A and 1B Automatic Camless Chucking Lathe. Operator's Handbook and Spares as Exploded Component Drawings. US

MHL1550S Harrison ALPHA 1550S Lathe. Operation Manual. Fanuc controls - withladder diagrams. Includes two additional publications: "Manual Guide ModeTutorial" designed as a familiarisation exercise for first-time users inthe set up and operation of the machine in manual mode and a "CNC Tutorial"that provides users with basic information on operation of the machine in CNCmode. 649 pages.

MHL-Alpha-SHarrison Alpha 1350S and 1000 Series Lathes: Detailed Manuals for Operation, Maintenance, Parts (as Sectional Drawings), Electrical Schematics and Ladder Diagrams. 465 pages

MHM8H HARRISON HORIZONTAL MILLINGMACHINES (can accept a vertical head) : Instruction Manual and Exploded PartsDiagrams. Covers all models. Includes a copy of the maker's Technical Sales andSpecification Catalogue.

MHM8V HARRISON VERTICAL MILLING MACHINES (dedicated, vertical-only machine): Instruction Manual and Parts Manual. This manual now includes details of the vertical head - this assembly being identical in construction to that fitted as an option on the horizontal Harrison milling machine. Covers all models. Includes a copy of the maker's Technical Sales & Specification Catalogue. It can be ordered securely on-line here: https://www.store.lathes.co.uk/print/MHM8V

MHW1 HARRISON GRADUATE (Harrison Graduate and Union) Woodturning andBowl-turning Lathe. Machine Manual with Maintenance, Lubrication, Wiring andExploded-diagram and Sectional-Drawings Parts Manual. Two editions areincluded, early and late, showing both types of spindle design. Includes anORIGINAL Sales and Specification and Accessories Catalogue.
Picture of the lathe here: HarrisonGraduate

MHW2 Harrison Jubilee Wood lathe.Simple User's Guide with annotated photographs and a copy of the detailed Sales& Specification Catalogue.

MH113 COLCHESTER-HEPWORTH HYDRAULIC COPYING (TRACER) Attachments for Series:150, 300, 400, 450, 470, 472, 600 and 620 as fitted to Colchester, Harrison and manyother makes of lathe. A complete collection of all the literature ever producedfor these models Operator's Instruction Manual and Spares as SectionalDrawings.

MA22 HARRISON-AINJEST High Speed Threading Attachment. Detailed InstructionManual and Spares Parts Manual as Exploded Parts Diagrams. Covers how tooperate on all on models as used on a variety of Harrison, Colchester and othermakes of lathe. Both the dial-selector and lever-selector models are covered -though not all styles of body casting are shown - these varying with theparticular machine to which they were fitted..

MA90 HASS VF Series Vertical Machining Centre. Operator's Instruction andProgramming Manual.

MA92 HASSE and WREDE Type 3 Turret lathe. Operator's Instruction andMaintenance Manual with useful sectional and exploded-component drawings.Includes a set of electrical schematics.

MH95 HAU Type SMF-350 and SM-350 Belt Grinding Machine. Operator's InstructionManual

MH100 HAULIN ELP5024 Lathe (bar-bed type). Operator's Instruction Book.Includes a copy of the maker's Sales and Specification Catalogue.

MH110A HAUSER 2A3 Jig Borer. Detailed Operator's Instruction and MaintenanceManual.

MH110B HAUSER 2BA Jig Borer Type - early "round top" design withrounded edges to the stand. Two Operation and Maintenance Manuals were producedfor this model, a shorter and longer version; they have some commonality butalso unique content, so both are included. Detailed Operator's Instruction andMaintenance Manual. Includes Use of Accessories, a Parts Manual as SectionalDrawings and Electrical Schematics.

MH110C HAUSER 2BA Jig Borer Type - later "flat-top" design and withword HAUSER down each front face of the square-edged stand . Detailed Operator'sInstruction and Maintenance Manual. Includes Use of Accessories and PartsManual as Sectional Drawings.

MH110D HAUSER 2SB Combination Jig Borer and Jig Grinder. S Jig Grinder.Operator's Instruction and Maintenance Manual with Parts as Sectional Drawingsand Electrical Schematic.

MH110E HAUSER 2S Jig Grinder. Operator's Instruction and Maintenance Manualwith Sectional Drawings and Electrical Schematic.

MH110F HAUSER 3BA Jig Borer Type. Detailed Operator's Instruction andMaintenance Manual Includes Use of Accessories, a Parts Manual as SectionalDrawings and copy of the maker's Sales and Technical Specification Catalogue.

MH110G Hauser Type M4 Jig Boring Machine. Detailed Operating and InstallationInstructions with Parts Manual as useful sectional drawings and a largeelectrical schematic.

MH110H Hauser Type M5 Jig Boring Machine. Detailed Operating and InstallationInstructions with Parts Manual as useful sectional drawings and a largeelectrical schematic.

MH110J Hauser 570 Auto Multi-Spindle Drill. Operator's Instruction Book withnumbers of useful sectional drawings.

MH110K Hauser Type 543 Drilling & Milling Machine with three verticalspindles. Service Manual with numbers of useful sectional drawings and a largeelectrical schematic.

MH110L HAUSER OP3 Electrical Switchgear Manual with Electrical Schematics pluscontrol descriptions. As used on a variety of Hauser Jig Borers.

MH110M HAUSER 2SO Optical Jig Grinder. Detailed Operator's Instruction andMaintenance Manual with Sectional Drawings and Electrical Schematic.

MH110N Hauser P215 Profile Projector. Operator's Instruction Manual.

MH110P/H102A HAUSER PROFILE AP-6A PROJECTOR. Technical Sales and Specificationand Catalogue - useful information (but not a manual). 12 pages.

MH110Q HAUSER PIVOT POLISHING. A most useful Explanatory Booklet showing therange of Hauser Pivot Polishers and accessories (Hauser 191, 212, 232, 241,244, 306, 309, 430 and 438) and how they work - together with an explanation ofthe process of pivot polishing. Includes extracts from a range of Hauserpublications that show the pivot polishers.

MH110R HAUSER PIVOT POLISHER Type 191. Operator's Instruction and ServiceManual with electrical schematic.

MH110S HAUSER PIVOT POLISHER Type 241 and Type 232 (Identical capacity but ondifferent stands). Operator's Instruction and Service Manual with electricalschematic. Includes copies of two maker's Sales & Specification sheets and7 pages with drawings of the diamond wheels and their mountings andcorrespondence with Hauser about them.

MH110T HAUSER PIVOT POLISHER Type 306 Dedicated Instruction Manual (5 pages).

MH110U HAUSER PIVOT POLISHER Type 430 Dedicated Instruction Manual with anElectrical Schematic. Includes a copy of the maker's detailed Sales &Specification Catalogue.

MH110V HAUSER Type 244 Machine for Trueing Tungsten Carbide Wheels as used onPivot Polishing Machines Types: 191, 212, 232 and 241. Technical Instructions.

MH110W HAUSER Type 160 Rotary Table (High Precision 12-inch (300 mm)diameter)). Operator's Instruction and Maintenance Instructions.

MH110X HAUSER UP1, UP2 and UP3 Universal Facing and Boring Heads. OperatingInstructions.

MH110Y HAUSER Tools and Accessories for Jig Borers and Jig Grinders. 26 pages.

MH116/MS692 HAVIR Shaper (branded Start-Rite) Operator's Manual.

MH120 HAYES Diemaster. Machine Manual and Parts Manual in the form of detailedCross-Sectional Drawings. Includes two editions of the maker's Sales andSpecification Catalogues including one showing the rare vertical attachment,high-speed vertical head, jig-boring and hydraulic-copying accessories.

MH120A HAYES Tracemaster TM32A Milling Machine. Instructional Manual andSectional Parts Manual. Includes a copy of the maker's Sales and SpecificationCatalogue.

MH120B HAYES Tracemaster TM43 (single head) Milling Machine. InstructionalManual and Sectional Parts Manual. Includes a copy of the maker's Sales and SpecificationCatalogue.

MH120C HAYES Tracemaster TM43-3D Milling Machine. Instructional Manual withParts Manual as Sectional Drawings Manual, a large Electrical Schematic and acopy of the maker's Sales and Specification Catalogue.

MH120D HAYES Tracemaster TM 54-3D AUTO Milling Machine. Instructional Manualand Sectional Parts Manual. Includes a copy of the maker's Sales andSpecification Catalogue.

HAYES SPARCATRON - see under SPARCATRON

MH240 HEALD No. 72 Universal Grinding Machine: 90-page Service, Repair andIllustrated Parts Manual with detailed Sectional Drawings.

MH240A HEALD Type 72A Size-Matic Internal Grinding Machine. Operator'sInstruction and Maintenance Manual.

MH240B HEALD Type 72A3 and 72A5 Size-Matic Internal Grinding Machines.Operator's Instruction and Maintenance Manual with Parts as Sectional Drawingsand a copy of the maker's detailed sales & technical SpecificationCatalogue..

MH240B2 HEALD Type 70A and 75A Internal Grinding Machines. Operator's Instructionand Maintenance Manual with Parts as Sectional drawings.

MH240B3 HEALD Type 74 Plain and Extended Bridge Internal Grinding Machine. Operator's InstructionManual and a Parts Manual as Sectional Drawings.

MH240C HEALD Type 81 Plain Internal Grinding Machine. Operator's Instructionand Maintenance Manual with Parts as Sectional Drawings.

MH240D HEALD 261 Rotary Surface Grinding Machine. Instruction and MaintenanceManual with Parts as Sectional Drawings.

MH240E HEALD (Cincinnati) 271 and 272 Plain and Toolroom Models and Heald 274Universal and Heald 275 and 276 Extended Bridge Internal Grinding Machines:Instruction and Maintenance Manual with Parts as Sectional Drawings andHydraulic Circuit Schematics.

MH240F HEALD (Cincinnati) 271 and 272 Size-matic and Gage-Matic InternalGrinding Machines: Instruction and Maintenance Manual with Parts as (improved) SectionalDrawings and a Hydraulic Schematic.

MH240G HEALD (Cincinnati) 271B and 272B Size-Matic and Gage-Matic InstructionManual and Service Repair Parts Manual as Sectional Drawings.

MH240L HEALD (Cincinnati) 171B Size-matic and Gage-matic and Plain InternalGrinding Machine. Operator's Instruction Book.

MH240LX Heald 171 (Cincinnati) Size-matic and Gage-matic and Plain InternalGrinding Machine. Operator's Instruction, Maintenance and and Parts Manual asSectional Drawings.

MH240H HEALD 222A-224A, 322A-324A and 422A-424A BORE-MATIC Models. InstructionManual and Service Repair Parts Manual as Sectional Drawings.

MH240J HEALD 45, 46B, 47 and 49 BORE-MATIC Models Precision Boring Machines.Instruction Manual and Maintenance Manual.

MH240K HEALD 46B, 47A, 48A and 49 BORE-MATICS Precision Boring Machines. PartsManual as Sectional Drawings.

MH240M Heald Tool Sharpening Machine No. 2. Instruction Manual and Parts asSectional Drawings.

MH240N HEALD SYKES No. 22 Rotary Surface Grinding Machines. Instruction Manualand Parts Manual as detailed Sectional Drawings.

MH240P HEALD (Cincinnat-Heald) Borematic Boring Machines Models 221A, 222A,224A, 225A, 226A, 322A, 324A, 325A, 326A, 422A, 424A, 425A and 426A Operation,Maintenance and Parts Manual as Sectional Drawings.

MH248 HEAP (Jushua Heap) Screwing Machine (Threading Machines). A complete datapack for the most common models consisting of the General Instructions andindividual manuals for the: 1-inch tangential; 4-inch Tangential; 4-inch UR, 4-inch URT and4-inch UT. Includes a copy of the maker's detailed Sales and Specificationcatalog with details of the tangential die holders.

MH250 HEB (H. ERNAULT-BATIGNOLLES) HN250 Lathe: Operator's and MaintenanceManual together with a separate Operation & Maintenance Manual for theHydraulic Copying Attachment.

MH250AP HEB (H. ERNAULT-BATIGNOLLES) Types All HN and HNC lathes. Parts manualas detailed and clear Sectional Drawings. Covers the HN350, HN400, HNC400,HN450, HN500 & HNC600.

MH250B HEB (H. ERNAULT-BATIGNOLLES) PILOT 510 Lathe: Operator's InstructionManual.

MH250C HEB (H. ERNAULT-BATIGNOLLES) "PILOT U" Lathe: Operator'sInstruction Manual (in French).

MH250D HEB (H. ERNAULT-BATIGNOLLES) OP320 and OP420 Lathes: Operator's andMaintenance Manual in FRENCH with Sectional Diagrams.

MH250E HEB (H. ERNAULT-BATIGNOLLES) OP320 and OP420 Lathes: Parts Lists assuperb Exploded-Component Drawings and Electrical Schematics. English andFrench text.

MH250F HEB (H. ERNAULT-BATIGNOLLES) HN Copying Unit. Applicable to a number ofthe Company's lathes. Detailed Operation Manual with many sectional drawings.English Text.

MH252 HECO Centring Microscope. Operating Instructions 1 page, plusillustration.

MH255 HECKERT (Fritzh Heckert - East Germany) also, see the WMW Section below

MW255 Heckert (WMW & UNION) BR40 x 1250 Radial Arm Drill Model (also badgedas the AMK and VEB). Basic Operating Manual with Parts Repair Manual asSectional Drawings and Photographs.

MW255A Heckert (WMW & UNION) FW and FU 315, FW.400, FW.400V also covers themain parts of the FW and FU 315, 400 and 400V1 models. Installation andOperator's Instruction Manual with Sectional Drawings. This is for the oldermachines only, without logic controllers.

MW255B Heckert (WMW & UNION) Vertical Miller Model FSS 400 x 1600/V1.Installation, Operator's Instruction Manual and Maintenance Manual with anumber of useful Sectional Drawings including Spindle Brake, Vertical Head,clutches, anti-backlash nut, gearing layout, etc.

MW255C Heckert (WMW & UNION) FU-250 and FW250 Vertical Millers. Data Packsupplied with new machines including an "Electrical Manual" and twoelectrical schematics.

MW255D Heckert (WMW & UNION) F315/400 Ten Electrical Schematics.

MW290 HECKLER and KOCH BA-20 Drilling and Boring Machine. Operator's Manualwith sets of Electrical and Control Schematics, a Heidenhain ROD-426 EncoderManual, Stromacon Current Converter Manual.

MW290A HECKLER and KOCH CNC 783/M Control System for Milling, Drilling andBoring Machines. Operator's Manual with Programming Examples, Messages,Technical Data, Hardware and Software Interfaces and CommissioningInstructions.

MS300 HECTOR - see under Flexispeed

MH310 HEENAN "Ajusto-Speed" variable-speed drives and couplings Sizes903, 904, 906 and 914. Instruction Manuals

MH310A HEENAN "Ajusto-Speed" variable-speed drives and couplingsSizes 906 and 914. Instruction Manual

MH310C HEENAN and FROUDE "Automatic Machines For Wire and StripIndustry". A comprehensive Booklet, which reviews the Company's productsand explains how the machines work. Not an Instruction Manual as such. Alsoincludes details of the Company's High-speed Nail Presses, Ring Coiling Machines,Chain Formers. Hair Grip Machine, Automatic Chain Formers and Welders,Automatic Mattress Chain Machine, Jack Chain Machine and Automatic High-speedWire Straightening and Cutting Machines.

MH310D HEENAN (and FROUDE) Wire and Strip Forming Machine: Instruction Manualwith maker's Technical Sales and Specification Catalogues.

MH310E HEENAN (and FROUDE) S 1 1/2 Wire and Strip Forming Machine: GuideBooklet with 11 General Sectional Drawings showing layout and installation.

MH310G HEENAN (and FROUDE) Dynamometer Type G Detailed Operator's Manual.

MH315 HEGENSCHEIDT Semi-Automatic Cranshaft Deep Rolling Machine Type 7812 K. Operator's Manual with a number of very large Sectional Drawings.

MH320 HEID DZKRSV-NC Lathe: Erection and Installation Manual.

MH320A HEID DZKR-LI Lathe: Detailed Operating Manual with fold-out ElectricalSchematics.

MH320B HEID DZKR-LI Lathe: Spare Parts Manual as Sectional Drawings.

MH320C HEID DZKR-LI Lathe: Instructions for Machining Layouts and NotchedProgramme Bars for automated production lathes equipped with LI Control.

MH320D HEID K-18 Lathe, KR-18 and KH-18 Lathes (Models with Universal Copying,Turret Tailstock and Relieving).Instruction and Maintenance Manual withElectrical Schematics Manual

MH72E HEID DLZK-400 Lathe: Operating Instructions with some fold-out SectionalDrawings, Electrical Schematics and copies of the frequently damagedscrewcutting and power feed charts. Includes a copy of the maker's Sales,Technical Specification and Accessories Catalogue for the Series 400 lathesconsisting of the DLZ400, DZ400, DLZK400 and DZK400.

MH72F HEID MSO Cylindrical Grinding Machine. Operating Instructions.

MH72H HEID DNK 26-32 Lathe. Operating Instructions with Electrical Schematicand screwcutting and feed charts. The basic lathe was offered in five versions:DN25 multi-purpose; K26 Multi-purpose copying; R26 Multi-purpose with turrettailstock, H26 Multi-purpose with Relieving Attachment and KH26 Multi-purposewith Relieving and Copying Attachments. The manual covers all versions.

MH200 Heidelberg Printer Models KOR, KORA, KORD64 and KORS. Supplimentary Operation Manual.

MH200A Heidelberg Printer Models KOR, KORA, KORD and KORS. Spare Parts Manual as clear, annotated Illustrations.

HEIDENHAIN - if your manual is notshown below others can be supplied. Please phone: 01298-871633 or e-mail: manuals@lathes.co.uk

MH329 HEIDENHAIN TNC 111 Service Instructions:

MH329B HEIDENHAIN TNC 114 Service Instructions:

MH329C HEIDENHAIN V.24 Data transfer Connection for TNC 125, 131, 135, 145,150, 151, 155. Positip VRZ-965, VRZ-742, ME-101 and ME-102.

MH329D HEIDENHAIN TNC 121 Operating instructions:

MH330 HEIDENHAIN TNC 125 Operating instructions:

MH330C HEIDENHAIN TNC 131, TNC 135: Mounting Instructions and Interface CircuitControl-Machine (Operating and Programming Instructions):

MH330DS HEIDENHAIN TNC 131 Point-to-Point with Straight Cut: Operating Manual

MH330D HEIDENHAIN TNC 131, TNC 135 Straight Cut Control and TNC 145, TBC 150,TNC 151, TNC 155 Contouring Control: Programming Examples:

MH330E HEIDENHAIN TNC 145 Contouring Control: Mounting Instructions andInterface Circuit Control-Machine (Operating and Programming Instructions):

MH330F HEIDENHAIN TNC 145 Contouring Control: Operating Manual:

MH330G HEIDENHAIN TNC 145C Contouring Control: Mounting Instructions andInterface Circuit Control-Machine (Operating and Programming Instructions):

MH330H HEIDENHAIN TNC 145C Contouring Control: Operating Manual:

MH330J HEIDENHAIN TNC 150: PLC-Description.

MH330K HEIDENHAIN TNC 150 Mounting Instructions and Interface CircuitControl-Machine (Operating and Programming Instructions).

MH330L HEIDENHAIN TNC 150 SERVICE MANUAL.

MH330M HEIDENHAIN TNC 150B, TNC 150Q, TNC 155A and TNC 155P: PLC-Description.

MH330N2 HEIDENHAIN TNC 151A, TNC 151P, TNC 155A and TNC 155P: ContouringControl: Operation Manual with Programming as "ConversationalInstructions" 316 pages.

MH330P HEIDENHAIN TNC 150B and TNC 150Q: Operating Manual.

MH330P2 HEIDENHAIN TNC 150B/F, TNC 150 Q/w, TNC 150 BR/FR and TNC 150 QR/WR:Operating Manual.

MH330Q HEIDENHAIN TNC 151A, TNC 151P, TNC 155A and TNC 155P MountingInstructions and "Interface Circuit Control-Machine" (Operating andProgramming Instructions).

MH330R HEIDENHAIN TNC 151 Service Manual.

MH33S HEIDENHAIN TNC 151 and TNC155 Service Manual.

MH330T HEIDENHAIN TNC 151 B/TNC 151Q and TNC155 B/TNC 155Q Operator'sInstruction Manual. Only ever published with German Text

MH330U HEIDENHAIN TNC 151 and TNC155 "PILOT" - Trouble-shooting Guidebased on the Workpiece Drawing.

MH330V HEIDENHAIN TNC 155A and TNC 155P Operating Manual.

MH335 HEIDENHAIN TNC 310 Users Manual.

MH330VV HEIDENHAIN TNC 351 and TNC 355 Service Manual

MH330V7 HEIDENHAIN TNC 370 Programming Manual with an extra 25 pages from a Heidenhain training course(as used on Bridgeport Machining Centres)

MH330WX HEIDENHAIN VRZ100, VRZ100.070 bi-directional counters. Service Manual

MH330WX2 HEIDENHAIN 300.1 and 300.2 Bi-directional Counters OperatingInstructions. English, German and French text.

MH330W HEIDENHAIN VRZ Bi-Directiona Counters models: 310, 311, 312, 313, 316, 317,320, 321, 322, 323, 410, 411, 412, 413, 416, 417, 420, 421, 422 and 423Operating instructions.

MH330XX HEIDENHAIN VRZ 401 and VRZ 405 Bi-Directional Counters: OperatingInstructions

MH330X HEIDENHAIN VRZ 650, VRZ 710 and VRZ 750 Counters: Operator's Guide

MH330X2 HEIDENHAIN VRZ 714, VRZ 754, VRZ756 and VRZ 757 Counters: Operator'sGuide, GERMAN text.

MH330XX HEIDENHAIN VRZ 720B and VRZ 760B Display Units. Operating Instructions.

MH330Y HEIDENHAIN VRZ 731: Operating Instructions:

MH331 HEIDENHAIN LS-303 Incremental Liner Transducer. Mounting and Set-upInstructions.

MH331A HEIDENHAIN LS-405/LS and LS-405C Mounting Instructions.

MH331B HEIDENHAIN LS-501D Incremental Liner Transducer. Mounting and Set-up Instructions.

MH331C HEIDENHAIN LS-501, LS-501D, LS-510, LS-510D D Incremental LengthMeasuring System. Mounting and Set-up Instructions.

MH331D HEIDENHAIN LS-503, LS-503D, LS-513, LS-513D Sealed Incremental LinearTransducer. Mounting Instructions.

MH331CE HEIDENHAIN LS-603 and LS-603C Sealed Incremental Linear Transducer.Mounting Instructions. FRENCH TEXT.

MH331CF HEIDENHAIN LS-703 Mounting Instructions & Technical Specification.

MH331CG HEIDENHAIN LS-803, LS-803Dm LS-903 Sealed Incremental Length MeasuringSystem. Mounting Instructions.

MH331DX HEIDENHAIN ROD 250 Operating and Mounting Instructions.

MH331D HEIDENHAIN ROD 420 and ROD 426: Mounting Instructions.

MH331E HEIDENHAIN ROD 450 and ROD 456: Mounting Instructions.

MH331F HEIDENHAIN MINI-ROD 450: Mounting and Operating Instructions.

MH331E HEIDENHAIN ND510 and ND550 Digital Read-out: Operating Instructions.

MH331F HEIDENHAIN LS-803, LS-803D and LS-903 Incremental Length MeasuringSystem. Mounting Instructions.

MH331G HEIDENHAIN LS-803, LS-803D,LS-903: Incremental Length Measuring SystemOperating Instructions.

MH331H HEIDENHAIN EXE-602D, EXE-604C and EXE-605S Interpolations and DigitizingElectronics. Operating Instructions.

MH332 HEIDENHAIN ROD-450: Incremental Angle Encoder. Mounting and OperatingInstructions.

MH332A HEIDENHAIN ROD-520 and 620: Incremental Angle Encoder. Mounting andOperating Instructions.

MH332B HEIDENHAIN ME-101 and ME-102 Magnetic Tape Cassette Unit. OperatingInstructions.

MH332C HEIDENHAIN TNC Contouring Control: special hand book with Features andSpecifications for Machine Tool Manufacturers.

MH332D HEIDENHAIN ND-920, ND-960 and NDP-960 Position Display Units for millingMachines. User's Manual.

MH332DA HEIDENHAIN 5041 Digital Read-out: Operating Instructions. English,French and German Instructions.

MH332DB Service Manual (Data Interfaces) for Heidenhain Controllers (withmachine parameters): TNC 122, TNC 124, TNC 125, TNC 131/135, TNC 145, TNC150/151/155, TNC 246, TNC 2500, TNC 306, TNC 310, TNC 335, TNC 351/355, TNC360, TNC 370, TNC 406, TNC 407/415, TNC 410, TNC 425TNC 426/430, CNC 232 B, CNC234.xx and CNC 332

MH338 HEIDENREICH and HARBECK (part of the VDF Group) Dividing Tables. Vereinfachte Berechnung vonKegelradkorpern - fur eine normale Verzahnung mit 1167 m fubhohe und 90-degreeAchsenwinkel.

MH338A Heidenreich and Harbeck (part of the VDF Group) 18RO lathe (cover the same design butlarger 21RO and 24RO Models). Operator's Instruction & Basic MaintenanceManual with reproductions of the screwcutting and feed charts for metric,Whitworth, Modul & Diametral pitches. THIS EDITION IS IN GERMAN but alsoincluded is a complete copy of the larger manual in English that contains theexploded-components Parts Manual See MV170 for the manual in ENGLISH.

For other Heidenreich and Harbeck see VDF below.

MH339 HEISTEEL 3-Roll Pyramid Roller Type FIX Operation and Maintenance Manual with an electrical Schematic.

MH340 HELLER FH-120 Horizontal Milling machine. Operating Instructions. GERMANTEXT.

MH340A HELLER FV-120 Milling Vertical Machine. Operating and MaintenanceInstructions. Both English and German Editions are included.

MH340B HELLER FV-140 Milling machine Assembly Drawings and ElectricalSchematic. with useful Sectional Drawings and Illustrations of mechanicalassemblies.

MH340C HELLER LFK-160/2500V plano-milling machine. Operating and basicMaintenance Instructions. Includes a very large Electrical Schematic. AllEnglish text.

MH340D HELLER Circular Cold Saws Models SSH 500 to 800 (manual) and SSH 500A to800A (automatic). Operating Instructions, Care & Maintenance, Assembly ofHydraulics, fault Finding.

MH340E Heller KA 315 and KA 315M Automatic Cold Sawing machines. Operating Instructions.

MH340F Heller Crankshaft Milling Machine Type RFK 200/500/2, also listed in the manual as the BA2065. Detailed, Comprehensive Operating and Maintenance Manual with a set of Electrical Schematics.Includes a Service Manual for the Chemaperm Slide Conveyors Type 16.7 and 16.8; Operating and Maintenance Instructions for the Demag Microspeed and Brake Motor; Service and Maintenance Instructions for the High Pressure Filters Series Pi and data on the Seimens Time Switch.

MH350 Hembrug DR1 Precision Toolroom Lathe (Artillerie-Inrichtingen, Holland)Operation, Service and Illustrated Parts Manual as Exploded Component Drawingsand an electrical schematic. Also includes a set of 25 sectional drawing -obviously from the blueprints but without the dimensions. English, Dutch andGerman Text.

MH350B HEMBRUG DR1 (Artillerie-Inrichtingen, Holland ) Operation and ServiceManual (DUTCH TEXT) Also includes a set of 25 sectional drawing - obviouslyfrom the blueprints but without the dimensions.Also included are thescrewcutting charts and two electrical schematics.

MH350C HEMBRUG ERGONOMIC "Hard Turning" High-precision lathe.Operation and Maintenance Manual with Parts as clear sectional drawings onlarge A3 sheets, Electrical Schematics and a reproduction of the ScrewcuttingCharts. English text.

MH360A HENDEY Lathes 1930 to 1944. Operator's Instruction Manual. A very highquality reproduction of the 5th edition of this excellent 88 page book containsa wealth of data about Hendey lathes from around 1920 to 1944. This edition isby far the best of all those produced during this period. Contains Cross-Sectional diagrams of thegeared headstocks. It can be ordered securely on-line here with payment by credit or debitcard or PayPal: http://www.store.lathes.co.uk/print/MH360A

H237A Hendey Lathes: "Modern Engine Lathes". This is the bestpublication for getting to grips with the earlier Hendey Models. A beautifullyillustrated and comprehensive 67-page catalog-cum-handbook it shows thecomplete lathe range as it was in the early to mid 1920s showing both cone andgeared-head models and the complete accessory range of slide rests, capstanattachments, steadies, collets, tools, coolant equipment, chucks, taper-turningunits, the various electric drive systems and countershafts, etc. Includes afull range of screwcutting charts and how to calculate formulas, details of thelathes' constructional arrangements, full details of how to operate therelieving attachment and a number of useful sectional drawings. Thispublication is very much more complete than the small format edition issued byHendey as a "Handbook".

It can be ordered securely on-line here with payment by credit or debitcard or PayPal: https://www.store.lathes.co.uk/print/H237A

MH360 HENDEY Lathes 1920 and earlier Operator's Handbook. Extracted from thefull-range catalog-cum-handbook above (Code H237A) this shows the constructionand operation of the Company's lathes back to around 1910. Extensivescrewcutting charts and operation of accessories: taper turning, relieving,etc.

MH360A HENDEY Lathes post 1920 to 1944. Operator's Instruction Manual. A veryhigh quality reproduction of the 5th edition of this excellent 88 page bookcontains a wealth of data about Hendey lathes from around 1930 to 1944. Thisedition is by far the best of all those produced during this period. ContainsCross-Sectional diagrams of the geared headstocks.

MH360AA HENDEY Lathe Operator's Instruction Manual for the No.1 12-inch generalPurpose Lathe.

MH360B HENDEY Parts Book for the 12-speed and 18-speed geared-head lathes. (not a first-rate reproduction)

H36C HENDEY Catalogue 1903. Although not a Manual this wonderful 115 pagepublication - which illustrates all the machine tools made by Hendey - containsa wealth of useful information: Sectional Drawings, extensive English andMetric screwcutting charts and detailed engravings of aprons, gearboxes, etc.Many of the machines illustrated were current until around 1918. CLICK to seedetails of other Hendey publications.

MH113 COLCHESTER-HEPWORTH HYDRAULIC COPYING (TRACER) Attachments forSeries: 150, 300, 400, 450, 470, 472, 600 and 620 as fitted to Colchester, Harrisonand many other makes of lathe. A complete collection of all the literature everproduced for these models Operator's Instruction Manual and Spares as SectionalDrawings.

MH380AM HEPWORTH HYDRAULIC COPYING (TRACER) attachment as fitted to the ELLIOTTMILMOR Milling Machine. Operating Instructions and Parts List.

MH380B HEPWORTH Dial-Set Programme Control System for capstan Lathes.Operator's Manual with Electrical Schematics and Parts Manual as SectionalDrawings.

MH380C HEPWORTH Dial-Set Wiring Schedule for Ward 7DS Capstan lathe.

MH380D HEPWORTH 360-degree Automatic Tracer System for Hydraulic or Electric Drives. Detailed Handook with Operating Instructions and Basic Maintenance.

HERBERT Acme-Gridley - see under Acme Gridley

MH390 Herbert (Australia) "Home Workshop" Woodworking Machine. Operation Instructions.

MH400 HERBERT "TURRET LATHE WORK" a detailed and highly informativebook by the Herbert Factory concerning capstan and turret repetition lathes.Written to assist for Operator's and those who design and lay out tools for thistype of machine. This is Edition 5, the largest and most complete of theseries. 180 copiously illustrated pages.

MH400A HERBERT "TURRET LATHE TOOLING" - Herbert Turret and Capstan Lathe Tooling - Two comprehensive, well-illustrated and detailed editions - one early with 27 pages and the other late with 78 pages - showing every variety of tooling made for these lathes.

MH400DATA - Combined publication containing "Herbert Turret Lathe Work" and "Turret Lathe Tooling". All the data needed to run these manual production lathes. (saving on the individual prices)

MH400B HERBERT AIR-OPERATED EQUIPMENT for Capstan and Turret Lathes. SpareParts List

MH400Z HERBERT BATCHMATIC Lathe. Mechanical Maintenance Manual.

MH400Z/1 HERBERT BATCHMATIC Lathe. Circuit Diagrams Manual for machines withthe Mk. 1 CNC Control System.

MH400Z/2 HERBERT BATCHMATIC Lathe. Parts Manual as Sectional Drawings.

MH402 HERBERT CARBIJUNIOR Copy-turning Lathe: Operator's Instruction Manual.

MH402A HERBERT older models: No. 1, 11, 13 and 19 Hexagon Turret Lathes.Operator's hand book.

MH404 HERBERT No.0 Electro-pneumatic Capstan Lathe: Operator's InstructionManual, Spare Parts Manual as Exploded Component drawings together with twoeditions of the Technical Sales and Specification Catalogue.

MH404A HERBERT No.1 Capstan Lathe: Operator's Instruction Manual.

MH405B HERBERT No.1 Capstan Lathe: Illustrated Spares Parts Manual as ExplodedComponent Diagrams.

MH405C HERBERT No.1 Capstan Lathe (Built in India Model) Illustrated PartsManual.

MH406D HERBERT 1S and 2S Capstan Lathe Operator's Instruction Manual.

MH407 HERBERT AUTO LATHES "Production on Auto-lathes". A 36 page A4Booklet illustrating the No. 3A, 4, 5A, 5A-33, Auto-Junior lathes and showing avariety of typical set-ups that assist in determining the best application of the Auto lathe.

MH407A HERBERT AUTO-JUNIOR Mk.1 and Mk.2 Lathes Setting Manual.

MH407B HERBERT AUTO-JUNIOR Mk.1 and Mk.2 Lathes Spare Parts Manual as ExplodedComponent Drawings.

MH408 HERBERT 2 Preoptive Hexagon Turret Lathe: Operator's Hand book.

MH410 Herbert 2D Capstan Lathe: Herbert 2D Capstan Lathes: Operator'sInstruction Manual and Setting Manuals. Three editions are included to coverall versions: the final, fully revised and most comprehensive 6th for theoriginal machines with "rounded" styling and two for the late-typemodels with "angular" lines - one of these is the interimpublication, the other the final 8th edition covering from Serial Numbers:No.30/12743 (Standard) and 15/12622 (Long-bed). Contains a number of usefulsectional drawings, some dismantling and Maintenance instructions and bothearly and lathe Sales, Technical Specification & Accessories Catalogues

MH411A Herbert 2D Capstan Lathe: Spare Parts Manual. Detailed SectionalDrawings of the complete machine.

MH411C1 HERBERT 2D Auto Robot Capstan Lathe with Plug-board Control: Operator'sInstruction Manual.

MH411C2 HERBERT 2D Auto Robot Capstan Lathe with Plug-board Control: Spare PartsManual as Exploded Component Diagrams.

MH411C3 HERBERT 2D Auto Robot Capstan Lathe with Plug-board Control: ElectricalSystems Manual.

MH411C4 HERBERT 2D Auto Robot Capstan Lathe with Plug-board Control: 31Blueprints with electrical and mechanical layouts.

MH411C5 HERBERT 2D Auto Robot Capstan Lathe with Plug-board Control: Operator's(comprehensive) Manual.

MH411C6/MN625A HERBERT 2D fitted with NICKOLS AUTOMATICS (EMI) Controls.Detailed Operator's Instruction and Maintenance Manual for this single-spindleAuto lathe.

MH411C7
EMI-MEC AUTO-HERBERT 2D Capstan NICKOLS AUTOMATICS (EMI) Controls. Service Manual.

MH411EE HERBERT 2D Auto Robot Capstan Lathe 21 very large Electrical Schematicslabelled as: "Standard Bar Type", "Plug Board Wiring","Schematic for Standard bar", "Motor and Control PanelWiring", "Schematic Wiring" and "Standard Bar"

MH411F HERBERT 2S, 2Ss and 2D Capstan Lathes: Spare Parts Manual as ExplodedComponent Diagrams.

MH411G HERBERT 2S and 2B Capstan Lathes: Operator's Instruction Manual.

MH411H HERBERT 2 SENIOR MONOSLIDE LATHE: Operator's Instruction Manual with acopy of the maker's Sales, Accessories & Technical Specification Catalogue.

MH411J HERBERT 2 FLASHCAP LATHE: Operating and Setting Manual.

MH411JE HERBERT 2 Auto FLASHCAP LATHE: Electrical, Mechanical and SystemsManual. Includes large Electrical Schematics.

MH411JP HERBERT 2 Auto FLASHCAP LATHE: Spare Parts as Exploded ComponentDrawings.

MH411L HERBERT "2 PROGRAMAUTO" Lathe: Spares as Exploded ComponentDrawings.

MH411M HERBERT "2 PROGRAMAUTO" Lathe: Detailed Maintenance Manual.

MH411N HERBERT "2 PROGRAMAUTO" Lathe: Setting Manual.

MH411P HERBERT 2M and 3M Lathes. Operating and Setting Manual.

MH411Q HERBERT 2M and 3M Lathes. Spare Parts Manual as Exploded ComponentDrawings.

MH411R HERBERT 2M and 3M Lathes. Mechanical Systems hand book (Maintenance andRepair). English and German text.

MH411S HERBERT 2M and 3M Lathes. Electrical Systems Hand book.

MH411T All 4 Herbert 2M and 3M Manuals:

MH411Z HERBERT No. 2 QUADRA CHUCK. Operator's Instruction Manual.

MH414 HERBERT 3 CAPSTAN Lathe: Spares as Exploded Component Drawings.

MH414A HERBERT 3A Auto-lathe Mark 1: Maintenance Manual.

MH414B HERBERT 3A Auto-lathe Mark 2: Maintenance Manual.

MH414C HERBERT 3A Auto-lathe Mark 1 and 2: Spare Parts Manual as ExplodedComponent Diagrams.

MH414D HERBERT 3A Auto-lathe Mark 1 and 2: Spare Parts Manual as ExplodedComponent Diagrams.

MH414E HERBERT 3A AUTO Lathe Mk. 2: Operator's Instruction and MaintenanceManual.

MH416 HERBERT 4, 4B and 4C Capstan Lathe: Operator's Instruction andMaintenance Manual. Includes 2 editions, early and late, covering all models.

MH416A HERBERT 4, 4B and 4BS Capstan Lathe: Parts Manual as Exploded ComponentDrawings (the Parts Manual for the Model 4 was changed from simple photographicplates to a fully drawn exploded-component edition in the 1960s). Full 115-pageedition including Power Chucks, hand and power bar-feed units.

MH416C HERBERT 4 SENIOR (and 4SE) Capstan Lathes with Dial-Change Headstock(identifiable by a 4-lever rotary speed control): Operator's Instruction andMaintenance Manual.

MH416D HERBERT 4 SENIOR Capstan (and Monoslide Lathe) with Dial-ChangeHeadstock (identifiable by a 4-lever rotary speed control): Parts as ExplodedComponent Drawings.

MH416E HERBERT 4 Senior Capstan Lathe with Dial-change Headstock: Operator'sInstruction, Maintenance and Dismantling Manual. Full 116-page edition.

MH416F HERBERT 4 Senior Preoptive Monoslide Lathe: Operator's Instruction andMaintenance Manual. Contains electrical diagrams for the electric 3-jaw chuckand bar-feed.

MH416G HERBERT 4 Senior Preoptive Capstan Lathe: Parts Manual as ExplodedComponent Drawings (full 180-page edition and a copy of the maker's detailed 12-page Sales, TechnicalSpecification & Accessories Catalogue.

MH416GE HERBERT 4 Senior Preoptive Capstan Lathe: Large Electrical schematic.

MH416H HERBERT 4 Auto-lathe: Maintenance Manual.

MH416J HERBERT 4 Auto-lathe: Spare Parts Manual as Exploded Component Pictures.

MH416K HERBERT 4 Auto-lathe: Operator's Instruction Manual.

MH416L HERBERT 4 AUTO JUNIOR: Operator's Instruction and Maintenance Manual.

MH416M HERBERT 4 FLASHCAP LATHE: Detailed Operator's and Maintenance Manualwith Sectional Drawings and Dismantling Instructions. 15 pages of Fold-outElectrical Schematics.

MH418D HERBERT 5 Senior PREOPTIVE Capstan lathes. Operating, Maintenance andSetting Manual (last edition with fuller details).

MH418E HERBERT 5 Senior PREOPTIVE Monoslide lathes. Operating, Maintenance andSetting Manual (last edition with fuller details).

MH418F HERBERT 5 Senior PREOPTIVE Capstan and 5 Senior PREOPTIVE Monoslidelathes. Spare Parts Manual as Exploded Component Drawings and Electrical Schematics (last edition withfuller details).

.MH418G HERBERT SENIOR Monoslide Lathes: Spares Parts Manual as ExplodedComponent Drawings.

MH418H HERBERT 5 PREOPTIVE HEPWORTH Mk 4 Dial Set Programme Sequence Control.Operator's Manual with Parts Manual as Sectional Drawings.

MH418J HERBERT 5A Auto Lathe: Operator's Instruction Manual.

MH418K HERBERT 5A Auto Lathe: Setting Manual.

MH418L HERBERT 5A Auto Lathe: Maintenance Manual.

MH418M HERBERT 5A Auto Lathe: Parts Manual as Exploded Component Drawings.

MH420 HERBERT 7B Combination Turret Lathe. Operator's Instruction Manual.

MH420A HERBERT 7B Preoptive Combination Turret Lathe. Operator's InstructionManual.

MH420B HERBERT 7 Combination Turret Lathe with dial-change headstock. PartsManual as Exploded Component Drawings.

MH420C HERBERT 7 Preoptive Combination Turret Lathe. Installation, Lubrication,Operator's Instruction and Maintenance Manual. 93 pages.

MH420D HERBERT 7 and 7B Preoptive Combination Turret Lathe. Parts Manual asDetailed Exploded Component Drawings. Full 182-page edition.

MH422A HERBERT 8 Preoptive Combination Turret Lathe: Installation, Lubrication,Operator's Instruction and Maintenance Manual with a number of pages devoted todismantling instructions. Two editions are included, early and late, coveringall versions of the lathe.

MH422B HERBERT 8 Preoptive Combination Turret Lathe: Illustrated Parts Manual.

MH424 HERBERT 9B and 9B/30 Combination Turret Lathe and 9B Hexagon TurretLathe. Operator's Instruction Manual.

MH424A HERBERT 9B and 9B/30 Combination Turret Lathe and 9B Hexagon TurretLathe. Illustrated Parts Manual as Exploded Component Drawings.

MH424B HERBERT 9C and 9C-30 Combination Turret Lathes and 9B Hexagon TurretLathe. Operator's Instruction Manual - full 63-page edition with an additional25-page Taper-Turning Manual.

MH424BP HERBERT 9C and 9C-30 Combination Turret Lathes and 9C Cross-sliding Turret Lathe Supplement. Parts Manual

MH424C HERBERT 9C and 9C-30 Combination Turret Lathes and 9B Hexagon TurretLathe. Illustrated Parts Manual as Exploded Component Drawings.

MH424D HERBERT 9C, 9C-30 Copy-turning Attachment Operating Instructions.

MH424E HERBERT 9S Turret lathe. Spares Parts as Annotated Photographs.

MH424F HERBERT 12B Combination Turret Lathe. Operator's Handbook withMaintenance Instructions. Includes a copy of the maker's detailed Sales &Specification Catalogue.

MH424FX HERBERT 12B Cross-sliding Turret Lathe. Operator's Handbook withMaintenance Instructions.

MH424G HERBERT 14/36 CombinationTurret Lathe. Operator's Instruction Manual.

MH424H HERBERT 14/36 Combination Turret Lathe. Illustrated Parts Manual asExploded Component Drawings.

MH424J Herbert Herbert AL20, AL30& AL40 CNC Lathes. Detailed Service Manual. Includes Fault-findingElectrical Schematics, a list of Parametrs for the A30 and a copy of the MarkCentury 1050HLX Control Manual with the title ""Operating theControl".

MH424K HERBERT 7, 9, 20 and 21 Combination Turret Lathes. Operator's Manual.

HERBERT SINGLE SPINDLE AUTOMATICS

MH426 HERBERT Single Spindle Automatic No. 48. Spare Parts Manual asSectional Drawings.

MH426A HERBERT Single Spindle Automatic Lathe "Attachments Parts Manual"with Sectional Drawings of all the Accessories.

MH426B HERBERT Single Spindle Automatic Lathes, Toolholders and Special Attachments. Complete listing and illustration of all the tooling and accessories for the Herbert - BSA Automatic Lathes.

MH426C HERBERT (also badged as a BSA) 48 Phase 2 Single Spindle Automatic Lathe. Spare Parts Manual as Sectional Drawings.

MH426CP HERBERT (also badged as a BSA) 48 Phase 2 Single Spindle Automatic Lathe. Operation and Service Manual

MH428 HERBERT "Prematic" Diehead Operator's Instruction Manual.Stationary and Rotating Models with Parts as Component Pictures.

MH428A HERBERT HUSKY TAILSTOCKS. Operator's Instruction Manual

HERBERT MILLING MACHINES
MH430-10 HERBERT No.10 Vertical Milling Machine. Operator's Instruction Manual with an Electrical Schematic.

MH430 HERBERT 46 Vertical Milling Machine. Operator's Instruction Manual.

MH430C HERBERT 47 and 47V Vertical Milling Machine. Operator's Instruction Manual.

MH430D HERBERT 47 and 47V Vertical Milling Machine. Spare Parts as IndividualComponent Photographs.

MH430-49 HERBERT 49V Vertical Millings Machine. Operation Manual.

MH430E HERBERT 15S Vertical Milling Machine Operator's Instruction Manual.

MH430F HERBERT OV Vertical MillingMachine. Operator's Instruction Manual and Parts as Exploded ComponentDrawings.

MH430G HERBERT 28A Vertical Milling Machine. Spare Parts Manual as usefulExploded Component Drawings.

MH430H HERBERT "WALTEC"PROGRAMME-CONTROLLED PRODUCTION MILLING MACHINE Types H, LV, H/RF and LV/RF.Operator's Instruction and Maintenance Manual with a General ArrangementDrawings.

MH430J HERBERT No.2 Simplimil Horizontal Milling Machine. Operation Manual.

MH430K HERBERT No.3 ND Horizontal Milling Machine. Operation Manual.

For HERBERT DeVlieg see also DeVlieg above

MH432-MD379A HERBERT/DeVLIEG No. 3H-48, 3H-60, 3H-72, 43H etc. SPIRAMATICJIGMIL (Covers all 3H versions. Installation, Operator's Instruction andMaintenance Manual.

MH432A/MD379B Herbert/DeVLIEG No. 3H, 43H and 4H Installation and Parts Manualas detailed Sectional Drawings with a detailed, multi-page wiring diagram. Thepages have been scanned at very high resolution, enlraged for perfect clarityand spread over 389 sheets.

MH432B/MD379 HERBERT/DeVLIEG 2B, 3B and 4B SPIRAMATIC JIGMILs. In order tocover all the models this publication is made up of several editions includingthose for the 2B, 3B, 4B, etc. in various capacities and length capacities.Installation, Operator's Instruction and Maintenance Manual together with aParts Manual as detailed Sectional Drawings. Electrical Diagrams and sampleInspection and Tolerances Test Results Sheets. This is a complete Data Packcontaining all known publications for the DeVlieg Type B. 370 pages.

MH432C-MD379B(X) Herbert/DeVLIEG JIGMIL Model B: Operator's Instructions withParts as fold-out Blueprints and 3 large Electrical Schematics.

MH432C-MD379D DeVLIEG K Series JIGMILS - covers all K types. e.g. 3K-72, 3K-60,4K-72, 5K-72, etc, where the first number is the spindle diameter and thesecond the table length. Installation, Operator's Instruction and MaintenanceManual with Electrical Diagrams.

MH432D/MD379E Herbert/DeVLIEG 4K Series JIGMIL - Parts manual as Detailedsectional drawings. In addition to the major parts it also includes sections onHydraulic Schematics, Bar-feed Unit, Electric Controls, Spindle Head ElevatingUnits and the Feed Unit, Table Unit, Saddle Unit and Coolant Unit.

MH434 HERBERT DRILLS Types C, V and M and "V Senior" (single andmulti-set drills) Operator's Instruction Manual - Final most-complete edition.

MH434A HERBERT DRILLS Types C, V and M and "V senior" Spare PartsManual as Exploded Component Diagrams. Final, most-complete Edition.

MH434B HERBERT DRILLS Types B, H, J and "V Junior" (precision benchlarge and small, precision column and multi-head units): Spare Parts Manual asPhotographs.

MH434C HERBERT DRILLING MACHINE TURRET-TYPE: Operator's Instruction andMaintenance Manual.

MH434d HERBERT DRILLING MACHINE TURRET-TYPE: Spare Parts Manual explodedcomponent drawings.

MH434E HERBERT 6AT AUTO-TURRET DRILL Operator's Instruction and MaintenanceManual.

MH434F HERBERT 6AT AUTO-TURRET DRILL Control System Manual. .

MH434G HERBERT Type L Drilling Machine. Spare Parts as Exploded ComponentDrawings with Wiring Diagram. .

MH434G HERBERT CO-ORDATROL Automatic Turret Drilling Machine. Spare Parts asExploded Component Drawings. .

MH436 HERBERT-BSA Turning Centre Thyristor Controller. Detailed Operator'sInstruction and Maintenance Manual

MH436A HERBERT "Co-ordatrol" Automatic Turret Drilling Machine: SpareParts Manual as Exploded Component Drawings.

MH436B HERBERT (Coventry) DIE HEADS. See entry under "Coventry" above- -

MH436C HERBERT (Coventry) TANGENTIAL CHASERS Some Notes on their Use andMaintenance. Cutting Action. Thread, Lead, Rake and Helix Angles. GrindingInstructions. Cutting Speed. Cutting Lubricant.

MH436D HERBERT Tangel and Tangar Dieheads. Detailed Instruction and MaintenanceManual.

MH438 HERBERT Collets, Feed Collets and Conical Holders for Herbert CapstanLathes. Illustrated and dimensioned Parts Manual.

MH440 HERBERT FlashTapper No. 2 Operator's Instruction Manual.

MH440A HERBERT FlashTapper Spare Parts Manual with Exploded Parts Assemblies.

MH440B HERBERT 'SAFTAP' Safety Tapper. Instruction Manual and Parts asSectional Drawings.

MH440C HERBERT S.10 Thread Rolling Machine. Instruction and Maintenance Manualand Parts as Sectional Drawings.

MH443 HERBERT SENTINEL CRI-DAN Type B High-SPEED THREADING MACHINE: Operatingand Setting Manual.

MH443A HERBERT SENTINEL CRI-DAN Type B High-SPEED THREADING MACHINE Type: SpareParts Manual as Exploded Component Diagrams.

MH443AC HERBERT SENTINEL CRI-DAN Type C High-SPEED THREADING MACHINE: Operatingand Setting Manual.

MH443B HERBERT SENTINEL CRI-DAN Type D High-SPEED THREADING MACHINE Instruction& Maintenance Manual

MH443C HERBERT SENTINEL CRI-DAN Type E High-SPEED THREADING MACHINE InstructionManual. For some unknown reason this model had a rather perfunctory, 20-pagemanual so, included with it, is a copy of the comprehensive CRI-DAN Type Bmanual that gives lots of useful extra information.

MH443D HERBERT SENTINEL CRI-DAN Type E High-SPEED THREADING MACHINE Parts Manual.Not a very good copy.

MH443E HERBERT SENTINEL CRI-DAN Type TT-260 High-SPEED THREADING MACHINEInstruction Manual and Parts Manual as Sectional Drawings.

MH443F HES (HERBERT) SENTINEL CRI-DAN Type H.E.S. High-SPEED THREADING MACHINEParts Manual as detailed Sectional Drawings.

MS575 Herbert-Smallpeice No. 6 SL Production Lathe. Operator's InstructionManual and Maintenance Guide.

MS575A Herbert-Smallpeice) No. 6 Multi-cut Production Lathe. Operator'sInstruction Manual and Maintenance Guide.

MS575B Herbert-Smallpeice) No. 6 Multi-cut Production Lathe. Parts Manual asExploded Component Drawings.

MS575C Herbert Junior Surface Grinder Parts Manual as exploded componentdrawings.

HERBERT-LUMSDEN - See under LUMSDEN

HERBERT MILLS - See under Mills Presses

MH560 HERCULES Power Presses. Installation, Maintenance and OperatingInstructions and Spare Parts as Drawings. Covers Models T.20, T.30. T. 40,T.60, T.100, T.129 and T.180.

HM570 Hercus Lathe Manual. By far the best Manual for this lathe is the oneproduced by Denford Tools for their original Boxford lathe - itself a copy(like the Hercus) of the USA South Bend. A few mechanical details are differentbut the operating procedures are identical. This publication is the completeand far-better early edition with lots of extra data about the 4.5-inch centreheight model. Includes material missing from the original including a HercusParts Manual, extra screwcutting data, pictures of the original charts fixed tothe lathes and the original configuration of changewheel set-ups for all Hercusmodels including the different arrangements of the later machines. Alsoincluded are interesting early and late Hercus Sales and SpecificationCatalogues.

HM570A "Hercus Textbook of Turning". Covers, in detail, use of the9-inch South Bend clone.

HM570B Hercus Illustrated Parts Manual. Early Models.

HM570C Hercus Illustrated Parts manual. Lathe Model Type 260 (includes bothearly and late editions).

HM570Z Hercus No. 0 Horizontal Milling Machine. Operator's Instruction andMaintenance Manual with some useful sectional drawings, Circuit Diagrams,Dividing Head Charts and a copy of the maker's Technical Specification, Salesand Accessories catalogue.

MH575 HERLAN P5 Horizontal Toggle Press. Operating Instructions with a numberof useful, large sectional drawings.

MH575A HERLAN P3 "FließPresse". Parts Manual. English, German and French Text.

MH570 HERLESS (Shun Shin) Lathes Models 11CF, 11CFK, 16CF and 16CFK. Operation,Maintenance and Parts Manual. Includes an Electrical Schematic.

MH580 HERMLE FW-801 and FU-801 HORIZONTAL Milling Machines and Accessories.Operator's Instruction and Maintenance Manual with parts manual as SectionalDrawings.

MH580A HERMLE 801 Universal Precision Toolroom Milling Machine with Ram Head(the Deckel-like model). Operator's Instruction and Maintenance Manual withParts Manual as Sectional Drawings. FRENCH TEXT.

MH580B HERMLE 801 PH Universal Precision Toolroom Milling Machine with NC Control using the Heidenhain LS 803, LS 803D and LS 903 Systems.Operator's Instruction and Maintenance Manual with Parts Manual as Sectional Drawings, the correct heidenhain manual and full instructions as to the use of the NC control system

HERNES - See "New Hermes"

H.ERNAULT-BATIGNOLLES: see under "HEB" and ERNAULT-BATIGNOLLES

MH590 HEY No. 3 Automatic Facing and Centring Machine: Operator's InstructionManual. Includes a copy of the Technical Sales and Specification Catalogue.

MH590A HEY No. 3 Automatic Facing and Centring Machine: Equipment for ShortWork - Supplementary publication.

MH590B HEY No. 3 Automatic Facing and Centring Machine: Manual of StandardTooling to inch Standard with detailed illustrations.

MH590C All 3 of the above Hey No. 3 Manuals

MH590D HEY 10-inch Gear Tooth Rounding and Chamfering Machine. Operating andMaintenance Manual.

MH590E HEY 20-inch Gear Tooth Rounding and Chamfering Machine. Operator'sInstruction Manual; two Manuals in one.

MH590F HEY 18A Gear Burring Machine. Operator's Instruction and MaintenanceManual.

MH600 HEYLIGENSTAEDT - a description of the company's copy milling machines andhow they operate.

MH602 H and H SPOT WELDERS. Operating and Maintenance Instructions.

MH305 HIBASS (Astro Technology) M90 OptoScan Guarding Systems. User's Manual.

MH305A HIBASS (Astro Technology) M-20A OptoScan Guarding Systems. User's Manual.

MH400ZZ HICK Blowers (Hick Hargreaves) 2000 and California Series Operator'sInstruction, Repair and Maintenance Manual

MH500 Hiller & Lutz SSP125 Friction Screw Press with Electro PneumaticHydraulic Control. Working Instructions and List of Spare Parts. IncludesElectrical and Pneumatic/Hydraulic Schematics.

MH607 HILGER and WATTS Micrometer Angle Dekker Mk. 111. Instruction Manual.Includes a copy of the Sales and Specification Catalogue.

MH607A HILGER and WATTS Inspection Enlarger Type TT288 Instruction Manual.

MH612 HILMOR DB401 & DB402 Semi-automatic CNC Tube Bender. OperationManual.

MH615 HINDUSTAN No. 2 Millingmachine Operator's Instruction and Maintenance Manual with Parts Manual andSectional Drawings.

MH615A HINDUSTAN FN2 Vertical Milling Machine. Operator's Instruction andMaintenance Manual with Parts Manual as fold-out Sectional Drawings.

MH615B HINDUSTAN M2U Milling Machine. Working Instructions.

MH618 HIRST Spot Welding JV10, JV25 and JV50. Instruction and MaintenanceManual.

MH620EE Hitachi E Series Module Type EM Programmable Control System. Operation Manual.

MH620 HITACHI SEIKI No. 2 ML Milling Machine - Horizontal, Vertical andUniversal Models: Operator's Instruction Manual.

MH620 HITACHI SEIKI MS Knee Type Milling Machine (Plain, Universal andVertical). Comprehensive Operator's Instruction and Maintenance Manual withParts Manual as Exploded Component Drawings.

MH620A HITACHI SEIKI Model K Milling Machine: Operator's Instruction Manual

MH620B HITACHI SEIKI 3NE-300 Turning Centre: Operator's Instruction andMaintenance Manual with Hydraulic Schematic (but not electric).

MH620BC HITACHI SEIKI 3NE-300 CNC Turning Centre. Mechanical Maintenance -Detailed Course Manual.

MH620BC HITACHI SEIKI 3NE-300 F-S6T Model B CNC Turning Centre. ElectricalDiagrams - Maker's copy but poor reproduction..

MH620D HITACHI SEIKI 3NE-300 Turning Centre: Parts Manual as SectionalDrawings.

MH620E HITACHI SEIKI 3NE-300 Turning Centre: Programming Manual (with FANUCSystem 6T-B).

MH620C HITACHI SEIKI 3NE-300A Turning Centre: Operator's Instruction andMaintenance Manual with Hydraulic Schematic (but not electric).

MH620G HITACHI SEIKI 4NE-600(2) Turning Centre: Programming Manual (with FANUCSystem 6T-B).

MH620F HITACHI SEIKI 4NE-600(2) Turning Centre: Operator's Instruction Manual(with FANUC System 6T-B).

MH620H HITACHI SEIKI 4NE-600 Turning Centre: Parts Manual as SectionalDrawings.

MH620H2 HITACHI SEIKI 4NE-2-600 & 4NE-2-2100 Turning Centre: Parts Manual as SectionalDrawings.

MH620J HITACHI SEIKI 4NE Wiring Diagram Manual with Software Sequence Diagrams.

MH620K HITACHI SEIKI 4NF-600 Turning Centre: Operator's Instruction Manual(with FANUC System 6T-B).

MH620L HITACHI SEIKI 5NE-1100 Turning Centre: Operator's Instruction Manual.

MH620LP HITACHI SEIKI NE/NF C.N.C. LATHES: Programmer's Manual.

MH620P HITACHI SEIKI SEICOS Mk. 2 Programming Manual.

MH320Q HITACHI SEIKI GTF-A2 Face Cutter Grinder. Detailed Operator'sInstruction Manual.

MH620R HITACHI SEIKI GTF-A2 Face Cutter Grinder. Parts Manual as SectionalDrawings.

MH620S HITACHI SEIKI HG400/3 HORIZONTAL MACHINING CENTRE. Parts List asExploded Component Drawings.

MH620SE HITACHI SEIKI HG400/3 CE Electrical Drawings.

MH620Y HITACHI SEIKI HG-43500. Parameter Lists for FANUC Series 16i-M Model A.

MH620ST HITACHI SEIKI Tool Length Measuring Device for Machining Centres.Instruction Manual. Measures the length of the tool automatically on themachine with the result used as an input into the tool-compensationmechanism.

MH620T HITACHI SEIKI HT20-S2 Model NR20 NC Lathe. Parts List as SectionalDrawings.

MH620U HITACHI SEIKI HT20/23R11 Turning Centre. Instruction Manual.

MH620V HITACHI SEIKI HT20/23R11 Turning Centre. Sequence Diagrams SEICOSLY05/30.

MH620W HITACHI SEIKI HT20/23R Electrical Diagrams SEICOS LY05/30

MH620X HITACHI SEIKI Auto-Setter and Tool Breakage Detector for NCC Lathe(Seicos LX3/L Multi) Instruction Manual.

MH621EE HITACHI SEIKI HITEC-TURN 20, 25 Electrical Schematics Manual for FANUC10TF,A and FANUC Sequencer PC-1.

MH621A HITACHI SEIKI NK20 Lathe. Parts Manual as Sectional Drawings.

MH621B HITACHI SEIKI MINIMATIC 500 Machining Centre. Parts Manual as usefulfold-out Sectional Drawings.

MH621B/MS508 Hitachi SEIKI Milling Machine Model G/V-2000 and 837. Instruction Manualand Parts Manual as Sectional Drawings (also marketed as the BUFFALO andMICROCUT 837).

MH621C Hitachi Seiki MULTI INTERACTIVE Computer-control SYSTEM Operator'sInstructions.
MH621D HITACHI SEIKI Hitec Turn 20/20-600/25 NC Lathe Operation Manual (withConversational Fanuc 10TE-F)

MH621E HITACHI SEIKI HG63011 (HG630-2) Horizontal Machining Centre. PartsManual as Exploded-component Drawings.

MH621F HITACHI SEIKI VA30, VA40 and VA50 Vertical Machining Centre. PartsManual as clear Sectional Drawings

MH621G HITACHI SEIKI VA Machining Centre with Fanuc System 6M Operator'sManual.

MH621H HITACHI SEIKI HITEC-TURN CNC Lathe. Operator's Instruction Manual (withFANUC 3T-F).

MH621J HITACHI SEIKI HITEC-TURN CNC Lathe. Programming Manual for FANUC 3T-F.

MH621K HITACHI SEIKI HITEC-TURN CNC Lathe. Programming Manual for FANUC 10T-E

MH621L HITACHI SEIKI VM500 Spares Parts Manual as very useful and clear Exploded Component Drawings. English, French, German and Japanese Text.

MH640 Hi-Ton Hydraulic Presses 2 to 12 tons, 20 tons and 30 tons. InstructionManual with general Maintenance, removing pump units, replacing ball valves,oil pressure adjustment, cylinder assembly, power ejection equipment, straighteningequipment, etc.

HME and HME-BENTLEY - also see entry under BENTLEY above

MH650 HME (Horden, Mason & Edwards) O.P. Range Power Presses 20, 30, 40, 55, 75 and 100 tons. ServiceManual with Parts Manual as Exploded Component Drawings.

MH650A HME (Horden, Mason & Edwards) OH Power Presses. Service and Maintenance for the "OH"type of friction Clutch and Brake.

MH650B HME (Horden, Mason & Edwards) RIGIDSPEED PRESS - 45, 70 and 100 tons. Service manual and PartsList with large electrical schematic.

MH650BCC HME (Horden, Mason & Edwards) FRICTION CLUTCH Service, Adjustment and Parts Manual - the clutch as fitted to the OP range of Power Presses.

HMT - see under HINDUSTAN

MH660 HORSTMANN Rotary Tables Type R100MP (EL19/1/-). Operation and Maintenance Manual with wiring diagram (and PNC Interface Connections), Air-Hydraulic Circuit Diagram.

MH725 HULTSFREDS (AB Hultsfreds Mekaniska Verkstad Sweden)Type AV Horizontal Boring Machines : Set-up and Maintenance Manual with Parts as detailed SectionalDrawings. Includes a copy of the maker's Sales and Specification catalogue.

MH728 HOBBIES "Companion" and "Hobbies" Lathes with Fretsawand Circular Saw Attachments. Assembly, Set and Fix Instructions withIllustrated Parts List. 5 Pages.

MH730A HOBBYMAT MD65 Lathe: Operating Manual, Maintenance Manual,Exploded-components Spares List and Wiring Diagram. Includes copies of theoriginal Sales and Specification catalogues for the lathe and powered millingattachment.

MH730B HOBBYMAT BFE65 Milling and Drilling Attachment (geared-head type):Operating Manual, Maintenance Manual, Exploded-components Spares List andWiring Diagram. Includes copies of the original Sales and Specificationcatalogues for the lathe and powered milling attachment.

MH730C HOBBYMAT MD120 and MD150 WOOD-TURNING LATHES: Operating Manual andIllustrated Spares List. Includes a copy of the original Sales andSpecification catalogues.

MH730D HOBBYMATWOOD-TURNING LATHE Special 4-jaw chuck by DHW. Operator'sInstruction Manual in German but with useful Sectional and illustrativeDrawings

MH733 HOBROUGH Surface Grinder. Basic Operator's Instruction and MaintenanceInstructions with Parts as Sectional Drawings.

MH733 HOBROUGH Surface Grinder Instruction and Maintenance Instructions withParts as Sectional Drawings. The Hobrough was a copy of the American ROBOTgrinder and very similar to the Brown & Sharpe 2B. In case it helps, theparts manual for that Smart & Brown is included as well.

HOBSON - Taylor Hobson Engravers - see under TAYLOR HOBSON

MH735 HOFMANN Dividing Heads. Instructions and Comprehensive Charts and Tablesfor the operation of the Type "UTH" (with division plates and gears)and the R, RI, RD, RDI Models.

MH735A HOFMANN Dividing Heads. Instructions Charts and Tables for the operationof the Type "HTH"

MH735B HOFMANN Electronic Dynamic Balancer Type SW-M. Working instructions.

MH735C Hofmann Precision Balancing Scales Type GS and NG. Operating Instructions.

MH740AA Holbrook Model B No. 10 lathe. operator's Manual

MH740 HOLBROOK Model B No. 13, No. 17 and No.21 Toolroom Lathes: Operator'sInstruction Manuals plus Lubrication data, screwcutting charts and electricaldiagrams. Includes a comprehensive Technical Sales and Specification andAccessories Catalogue that clearly explains the machine's functions andcapabilities.

MH740A HOLBROOK Model C Lathes: Operator's Instruction Manuals plus detailedscrewcutting charts and electrical diagram. Includes a comprehensive TechnicalSales and Specification and Accessories Catalogue that clearly explains themachine's functions and capabilities.

MH740C HOLBROOK Model D Nos. 13, 15 and 18 Toolroom Lathe (covers all the ModelD lathes and the differences between them): Operator's Instruction Manuals.Individual publications bound as one plus the comprehensive Technical Sales andSpecification and Accessories Catalogue.

MH740DR HOLBROOK Model D Lathe Relieving Attachment Instructions.

MH740E HOLBROOK Model H Lathes (all versions) Detailed and well illustrated120-page Operator's Instruction and Maintenance Manual. Revised Second Editionwith electrical schematic.

MH740F HOLBROOK Model H-20 Lathe Parts Manual as Exploded Component Drawings.

MH740G HOLBROOK Model H-20 Lathes Operator's Instructions with Oiling Chart.

MH740H HOLBROOK Model 10B (modern-style lathe from the 1970s and 1980s)Operator's Instruction and Maintenance Manual.

MH740J HOLBROOK MINOR Lathe. Comprehensive Operator's Instruction andMaintenance Manual with Electrical Schematics.

MH750 HOLMAN Drill Sharpener Model "DBH" Operator's Instruction andMaintenance Instructions.

MH765 HOLROYD No. 3 Profile Milling Machine. Operator's Instruction Manual.

MH765A HOLROYD 6-inch Oil Grooving Machine. Operator's Instruction Manual.

MH765B HOLROYD Twist Drill Fluting and Relieving Machine. Operator's Hand book.

MH765C HOLROYD CS-380 Form Cutter Sharpening Machine. Operating Instructions.

MH765D HOLROYD 5A Automatic Pump Rotor Milling Machine. Operating andMaintenance Instructions.

MH765E HOLROYD Automatic Rack Cutting Machine. Operating Instructions.

MH765F HOLROYD T160 Short Thread Milling Machine. Operating Instructions with an Electrical Schematic.

MH780 HOMMEL UWG1 Universal Machine Tool. Comprehensive, very high resolutionscan of the 150-page, beautifully Illustrated Instruction Manual for thisincredible, multi-purpose machine tool. English, French, German and Italiantext.

MH780A HOMMEL UWG2 Universal Machine Tool. Comprehensive, 217-page InstructionManual for this incredible, multi-purpose machine tool. English or German Text.

MH861 HORDERN, MASON and EDWARDS K Type Knuckle Joint Presses. Service Manualand Parts Manual as Exploded Component Drawings. Includes Electrical Schematics.

MC156A HORDERN, MASON and EDWARDS (HME and Cincinnati) GP and GH Open FrontPower Presses. Combined Operator's Instruction Manual, Service Manual and PartsManual as detailed Sectional Drawings. Includes Electrical and HydraulicSchematics. (see also HME-Bentley entry)

MC156B HORDERN, MASON and EDWARDS (HME and Cincinnati) OP Type PRESSES: ServiceManual and Parts Manual as detailed Sectional Drawings

MC156C HORDERN, MASON and EDWARDS (HME and Cincinnati) G Series Open Frent Power Presses. Service Manual and Parts asA3-size, pristine Sectional Drawings. Includes abd Electrical Schematic.

MH790 HORNAMILL Milling Attachments. A Data Pack consisting of: OperatingInstructions for the 3-way Lathe Attachment, Catalogue for the 3-way MillingAttachment, Powered Milling Attachment to Convert Horizontal Milling Machinesinto a Vertical Miller. 13 pages.

MH861 HORDEN, MASON and EDWARDS Models "K" Knuckle Joint Presses.Service Manual and Parts Manual as Exploded Component Drawings. IncludesElectrical Schematics.

HORDEN, MASON and EDWARDS Presses - bought by Cincinnati listings can be foundunder that name and HME and HME-Bentley

MH862 HORSMAN COPMATIK 13/4" Automatic Capstan Lathe. Operator'sInstruction and Maintenance Manual with Electrical Schematics.

MB920E HOUDAILLE Strippit Super 30/30 Hole Punching & Notching machine.Operation & Maintenance Manual with an electrical schematic and a copy ofthe Fabricator Tooling Catalogue.

MH863 HUAN (Lin Huan) TL-20, TL-25,TL-32 and TL-42 Turret Lathes. Operator's Instruction Instructions andMaintenance with Parts as Sectional and Exploded-component drawings. Includedan electrical Schematic.

MH864 HUELLER Hubomat BA Miller. Operator's Instruction and Maintenance Manual. 6

MH864A HUELLER-BSA Electrically Operated Tapping Machines: OperatingInstructions with Sectional Drawings.

MH864B HUELLER "Ultromat" TAPPING MACHINES UG1, UG2, UG3, UG4 andUG5 (Hahn and Klob): Operator's Instruction and Maintenance Manual withElectrical Schematics.

MH864C HUELLER "Ultromat" TAPPING MACHINES UG8, UG20 and UG36 (Hahnand Klob): Operator's Instruction and Maintenance Manual with Parts asSectional Drawings and Electrical Schematics.

MH866 HUFFORD "Model 50" 50-Ton Stretch-Wrap Forming machine.Operator's Instruction and Service Manual.

MH867 Humpage, Thompson and Hardy: Gear Hobbing Sales and Specification Folder,which includes basic Operating Manual.

MH870 HUMPHRIS EP.10 Endwheel Press. Operating and Maintenance Hand book andParts manual as Exploded-component Drawings.

MH870A HUMPHRIS CP25 25 Ton Press. Electrical Schematic, GeneralArrangement Blue Print (sectioned), Tooling Blue Print and lubricationrecommendations.

MH870B HUMPHRIS OC10 10-ton Hydraulic Press. Operation Handbook

MH870Z Humphreys Magnetic Chucks and Demagnetisers. Operator's Instruction andMaintenance Instructions.

MH872 HUNT Drill Grinders Models DG100, DG23, DG2A, DG3S, DG3A, DG50 &DG100. Operator's Instruction and Parts Manuals - includes detailed Sales andSpecification Catalogues. These instructions apply to all types and sizes of"Hunt patent" drill grinder.

MH874 HURCO BMC-20 NC Comprehensive Machining Centre. Operator's Instructionand Maintenance Manual with Parts Manual as Sectional Diagrams and ElectricalSchematics.

MH874A HURCO BMC-30 NC Comprehensive Machining Centre. Operator's Instructionand Maintenance Manual with Parts Manual as Sectional Diagrams and ElectricalSchematics.

MH874B HURCO MB-1 3-axis CNC Machining Centre: Operator's Instructions.

MH874C HURCO MB-1 3-axis CNC Machining Centre: Comprehensive Maintenance Manualwith Parts as Sectional Drawings.

MH874D HURCO KMB-1m 3-Axis Milling Machine. Operator's Instruction andMaintenance Manual.

MH874D2 HURCO KMB-1 3-Axis Milling Machine. Comprehensive Installation,Operation, Maintenance and Parts Manual

MH874E HURCO "Using the Calculation Assist Software" and"Special Executive with Conventional CNC".

MH874F HURCO Hawk 5M Knee-type Milling Machine. Data Pack consisting of:
Machine Maintenance Manual
Ultimax Programmig Instruction Manual
Ultimax 3 Operator's Manual for single and Dual Screen Control
Ultimax 3 Operator's Manual Standard Version
Training Manual for Conversational Part Programming (Rotary) for Ultimax Controls
Wiring Diagrams Manual with Electrical Parts Listings. 1550 pages.

MH876 HURON (Leon Hure) Type LU Milling Machine. Operator's Instruction andMaintenance Manual for the main machine and the accessories including:Universal Heads, powered rotary tables, milling heads, dividing heads and witha Parts Manual as Exploded Components Diagrams.

MH876A HURON (Leon Hure) Type K, KM and KU Milling Machines - all Models:Operator's Instruction and Maintenance Manual for the main machine and theaccessories including: powered rotary tables, milling heads, dividing heads andwith a Parts Manual as Exploded Components Diagrams.

MH876C HURON (Leon Hure) Type N (NU and MU Series) Milling Machines:Comprehensive 225-page Operator's Instruction and Maintenance Manual for themain machine and the accessories including: powered rotary tables, millingheads, dividing heads and with a Parts Manual as Exploded Components Diagrams.Includes a copy of the 33-page Sales and Specification and AccessoriesCatalogue.

MH876-NC HURON NU150 Numerical Controlled Milling Machine. A Data Pack thatappears to have been supplied with a new machine. Includes: Inspection Chart,Foundation Plan and Dimension Chart,Installation, Technical Features, PendantControls, Measurement Feedback, Heidenhain LS Incremental Linear TransducerManual, Heidenhain ROD 450 Incremental Encoder Manual. Indramat Servo System,Permanent Magnet Direct-current Servo Drives Series MDC10, 3-axes Single-phaseThristor Control Amplifierand Modular Structured Two-pulse Control UnitManuals, Electrical Diagrams,Drive System Drawings, Lubrication Instructionsand a Parts Manual as Exploded Component Drawings.

MHMU355 HURON MU355 Instruction & Maintenance Manual.

MH876D/H821 HURON MILLING MACHINES: Wonderful 158-page Catalogue showing thefull range of millers and Accessories as current through the 1950s to 1970s.Models include: "N", "M", "NU", "MU","MVC", "MVCAO", "MVP", "MVPCNP","MVPCNC", "MVGVCNP", "MVGVCNC", "MH","MVR", "MUR", "MUCNP", "MUCNC","MHCNP", "MHCNC", "MHR", "LR","2-LUR", "L", "P", "PU","PUCNP", "PUCNC", "R" and "RU". Manyexplanatory drawings accompany each entry and there are copious photographs andexplanations of difficult and complex jobs being set up and machined. Completedetails are given of the many heads: universal, right-angle, sensitivedrilling, extension, production, sliding, sliding spindle, automatic-feed andslotting heads - as well as all the other many attachments and options.

MH876E/H821A HURON MILLING MACHINES: Wonderful 100-page Catalogue showing thefull range of millers and Accessories as current through the 1940s to 1950s.machines include: "K", "KU", "KVC", KVCAO","KVP", "KH", "KVR", "KUR", "KHR","LR", 2-LUR", and "L". Many explanatory drawingsaccompany each entry and there are copious photographs and explanations ofdifficult and complex jobs being set up and machined. Complete details aregiven of the many heads: universal, right-angle, sensitive drilling, extension,production, sliding, sliding spindle, automatic-feed and slotting heads - aswell as all the other many attachments and options.

MH876F HURON "Dossier Technique Electrique Machine" Circuit Diagramset market for "Machine DX".

MH876G HURON Conseils Pratiques pour l'utilisation des Machines a FraiserUniverselles P. Hure A broche Orientable Type42c (1950s). 177 pages.

MH876X Huron 230 Lathe (Danish Machine Tool Co.) Operating Instructions with anelectrical schematic. DANISH TEXT.

MH880 HURTH AMT4 AutomaticMulti-spindle Indexing Head. Operator's Instruction and Adjustment Manual.

MH880A HURTH KF32a Milling Machine Automatic type. Detailed Operator'sInstruction and Maintenance Manual (with full cycle control instructions) andElectrical and Hydraulic Schematics.

MH880B HURTH LES1 Automatic Loading Equipment. Electric data Sheets.

MH880C HURTH lF4 VERTICAL KEYWAY and SLOT MILLING MACHINE. Detailed Operator'sInstruction and Maintenance Manual with Large Electrical Schematics and a copyof the Specification and Sales and Specification Catalogue.

MH880D HURTH lF32a Automatic keyway Miller. Detailed Operator's Instruction andMaintenance Manual with Electrical and Hydraulic Schematics and a copy of theSpecification and Sales and Specification Catalogue.

MH880E HURTH Type SRS400 Gear Shaving Cutter Grinder. Operator's Instructionand Maintenance Manual with Electrical Schematics.

MH880F HURTH Type SRS400 Gear Shaving Cutter Grinder. Spare Parts Manual asPhotographs.

MH880G HURTH Type ZK-5 (ZK5) Gear Tooth Chamfering & Deburring Machine.Operator's Instruction and Maintenance Manual.

MH880G2 HURTH Type ZK-10 Gear Tooth Chamfering & Deburring Machine.Operator's Instruction and Maintenance Manual.

MH880H HURTH Type FSA2 CutterGrinding Attachment. Operator's Instruction and Maintenance Manual.

MH880J HURTH Type LES1 Multi-purpose Loading Equipment. Electrical Data Sheets.

MH880K HURTH RV355 Power Feed Circular table. Operator's Instruction andMaintenance Manual.

MN300DP/MH380D HURTH Multi-purpose Loading Equipment Type LES1 as fitted to NewBritan Model 88 lathe. Electric Data Sheets.

MH880L HURTH V10A vertical Milling Machine. Operator's Instruction andMaintenance Manual with electrical schematic.

MH880M HURTH Automatic Indexing Head and Multi-head Indexing Heads AT4 and AMT4 Operator's instructions with some useful sectional drawings.

MH881 HUVEMA (?) Turret Milling Machine HU-24-EVS. Operation & MaintenanceManual with Parts as Exploded Component drawings. (the maker or brand isuncertain but the model type correct)

MH882 HYBCO 2100 Series Cutter Grinder ("Two-way Relieving Fixture2100"). Instruction Manual.

MH882X HYDRAFEED Multifeed 3-80 Short Mazazine Bar Feed. Operator's Manual, Mazak Lathe Users Only.

MH883 HYDRAULIC DIE FORMING. An Explanatory Manual.

MH884 HYDRO NC540 Detailed Mechanical, Service and Maintenance with Parts asExploded Component Drawings and Electrical Schematics.

MH885 HYDROFLOW 20-22-520 Centrifuge and Scavenge and Direct Drive Centrifuges.Detailed Manual with Electrical Schematics.

MH886 HYDROPOWER 390 Lathe. Set of nine large electrical schematics.

MH886A HYDROPOWER 430 Lathe. Operator's Instruction Manual.

MH888 HYDRO-BLOCK Distribution Valve and Lubrication Systems. MaintenanceManual.

MH900 HYDROVANE COMPRESSORS by BULLOWS - if you machine is not listed below amanual may still be available: Phone 01298-871633
Most Hydrovane Literature is in English, French, German, Spanish and Italian

MH900E Early Hydrovane Compressors including: R900, R1800, SR1800, R4000,R6000, R8000 and R10000 Series (e.g. SR4508, R6308, etc). Detailed Operator'sInstruction and Maintenance Manual with Parts as Exploded Photographic Platesand sectional Drawings. Includes Electrical Schematics.

MH900A Hydrovane 3 Series Operator's Instruction and Maintenance Manual withElectrical Schematics and Parts Manual as Exploded Component Drawings (H.C).

MH900B Hydrovane 5 Series Operator's Instruction and Maintenance Manual withElectrical Schematics and Parts Manual as Exploded Component Drawings.

MH900BX Hydrovane 5/15 Series Operator's Instruction and Maintenance Manualwith Electrical Schematics and Parts Manual as Exploded Component Drawings. TwoEditions are included, the early and the late.

MH900C HYDROVANE Rotary Compressors 5, 15 and 20. Operator's Instruction,Maintenance and Parts Manual as Exploded-component Pictures.

MH900D HYDROVANE Rotary Compressor 6 Series, 6PU and 6PUA. Operator'sInstruction, Maintenance and Parts Manual as Exploded-component Pictures.

MH900E HYDROVANE Rotary Compressor 6PUM, 6PUH and 6PUMR. Operator's Instruction,Maintenance and Parts Manual as Exploded-component Pictures.

MH900F HYDROVANE Rotary Compressor 7 Series 37-47. Operator's Instruction,Maintenance and Parts Manual as Exploded-component Pictures.

MH900G HYDROVANE Rotary Compressor 8 Series all Types. Operator's Instruction,Maintenance and Parts Manual as Exploded-component Pictures and ElectricalSchematics.

MH900H HYDROVANE Rotary Compressor 9 Series 955-975 Air Centres. Operator'sInstruction and Maintenance Manual with Electrical Schematic.

MH900/9PU HYDROVANE Rotary Compressors 9PU and 18PU. Operator's Instruction andMaintenance Manual with Electrical Schematic.

MH900J HYDROVANE Rotary Compressor 12/6. Operator's Instruction and Maintenanceand Parts Manual as Exploded-component Pictures with Electrical Schematic .English, French German and Italian text.

MH900K HYDROVANE Rotary Compressors 12 and 12PU and 12PUAC. Operator'sInstruction, Maintenance and Parts Manual as Sectional Drawings.

MH900L HYDROVANE Rotary Compressors 13-17-23. Operator's Instruction,Maintenance and Parts Manual as Exploded-component Pictures with ElectricalSchematic.

MH900M HYDROVANE Rotary Compressors 13-23PU and 13-23PUA. Operator'sInstruction, Maintenance and Parts Manual as Exploded-component Pictures withElectrical Schematic.

MH900N HYDROVANE Rotary Compressors 13-23. Operator's Instruction, Maintenanceand Parts Manual as Exploded-component Pictures with Electrical Schematic.

MH900P HYDROVANE Rotary Compressors 23-33-43. Operator's Instruction, Serviceand Parts Manual with Electrical Schematic.

MH900Q HYDROVANE Rotary Compressors 25 Series. Operator's Instruction andService Manual with Electrical Schematic.

MH900R HYDROVANE Rotary Compressors AC26W, 32W, 41W (N5 and N4). Operator'sInstruction, Maintenance and Parts Manual as Sectional Drawings.

MH900S HYDROVANE Rotary Compressors 27-27ck, 33-33ck, 43-43ck. Operator'sInstruction, Service Manual and Parts Manual with Electrical Schematic.

MH900T HYDROVANE Rotary Compressors 33-43. Operator's Instruction, Maintenanceand Parts Manual as Exploded-component Pictures with Electrical Schematic..

MH900U HYDROVANE Rotary Compressors 33-43pu and 33-43pua. Operator'sInstruction, Maintenance and Parts Manual as Exploded-component Pictures withElectrical Schematic..

MH900V HYDROVANE Rotary Compressors 43 Series and 43 PUM. Operator'sInstruction, Maintenance and Parts Manual as Exploded-component Pictures withElectrical Schematic..

MH902W HYDROVANE Rotary Compressors 43 Air Centre Operator's Instruction andMaintenance Manual with Electrical Schematic..

MH902X HYDROVANE Rotary Compressors 45 and 45PU Operator's Instruction andMaintenance Manual with Electrical Schematic..

MH902Y HYDROVANE Rotary Compressors 47 Operator's hand book.

MH902Z HYDROVANE Rotary Compressors 48 Operator's Instruction and MaintenanceManual with Parts Manual with Electrical Schematic.

MH903A HYDROVANE Rotary Compressors 66 "Element" Model. Operator'sInstruction and Maintenance Manual with Parts Manual with ElectricalSchematic.

MH903B HYDROVANE Rotary Compressors 66, 66PU, 66PUA, 55CK, 66CK and 66CRK.Operator's Instruction, Maintenance and Parts Manuals as Exploded-componentdrawings with an Electrical Schematic.

MH903BC HYDROVANE Rotary Compressors 66 Air Centre Model. Brief Operation andMaintenance Manual with electrical schematic. 6 pages.

MH903C HYDROVANE Rotary Compressors 67/87 Operator's Instruction andMaintenance Manual with Parts Manual with Electrical Schematic..

MH903D HYDROVANE Rotary Compressors 68 Air Centre Operator's Instruction andMaintenance Manual with Electrical Schematic..

MH903E HYDROVANE Rotary Compressors 120 "Packaged Unit" Detailed Operation and MaintenanceManual with Parts Manual as large, clear Exploded-component Drawings.MH903F HYDROVANE Rotary Compressors 120 "Felt" Operator's Instructionand Maintenance Manual with Electrical Schematic.

MH903G HYDROVANE Rotary Compressors 120PUM, 120PUMW, 120PU, 120PUW and 120PUAOperator's Instruction and Maintenance Manual and Parts Manual asExploded-component Pictures with Electrical Schematic.

MH903H HYDROVANE 128PU and 128PUA Compressors. Operator's Instruction andMaintenance Manual with Exploded Component Parts Lists and ElectricalSchematic.

MH903J HYDROVANE 128 and 178 Compressors. Operator's Instruction andMaintenance Manual with Electrical Schematic.

MH903K HYDROVANE 140 Air Centre Compressors. Operator's Instruction andMaintenance Manual with Electrical Schematic.

MH903L HYDROVANE 140 Air Centre AUTO Compressors. Operator's Instruction andMaintenance Manual with Electrical Schematic.

MH903M HYDROVANE 148 and 178 Compressors. Operator's Instruction andMaintenance Manual with Electrical Schematic.

MH903N HYDROVANE 170 and 170 Air Centre Compressors. Operator's Instruction andMaintenance Manual with Electrical Schematic.

MH903P HYDROVANE 170 "Felt" Air Centre Compressors. Operator'sInstruction and Maintenance Manual with Electrical Schematic.

MH903R HYDROVANE 170 Air Centre AUTO Compressors. Operator's Instruction andMaintenance Manual with Electrical Schematic.

MH903S HYDROVANE 170PU and 170PUW Compressors. Operator's Instruction andMaintenance Manual with Parts as Exploded Component Pictures (170 pages).

MH903T HYDROVANE 178, 178PUTS and 178PUWS Compressors. Operator's Instructionand Maintenance Manual.

MH903U HYDROVANE 218 and 258 Compressors. Operator's Instruction andMaintenance Manual.

MH903V HYDROVANE Rotary Compressors 250, 250PU and 250WPU. Operator'sInstruction, Maintenance and Parts Manual as Exploded-component Pictures.

MH903W HYDROVANE 388 Air Centre. Operator's Instruction and Maintenance Manualwith Parts Manual as Exploded Component Drawings and an Electrical Schematic.

MH903x HYDROVANE 501 and 502 Compressors. Operator's Instruction andMaintenance Manual and Parts Manual as Exploded-component Pictures.

MH903Y HYDROVANE 705 and 707 Compressors. Operator's Instruction andMaintenance Manual and Parts Manual as Exploded-component Pictures.

MH903z HYDROVANE 845 Compressors. Operator's Instruction and Maintenance Manualand Parts Manual as Exploded-component Pictures. Includes an electrical schematic.

MH904 HYDROVANE Rotary Compressors SR900, SR1800, SR6000, SR6500, SR4000,SR4504. Operator's Instruction, Maintenance and Parts Manual as Photographs andSectional Drawing.

MH904A Hydrovane H3TM Compressor. Operator's Instruction and Maintenance Manualand Parts Manual as Exploded-component Pictures.

MH904A Hydrovane H3TR Compressor. Operator's Instruction and Maintenance Manualand Parts Manual as Exploded-component Pictures.

MH925 HYSTER (Willamette Hyster Co) "Karry Krane" Model KB Instruction and Parts Manual as Sectional Drawings.

MH950 Hyundai T-BL-20B Bench Lathe. Instruction Manual

MH950A HYUNDAI-KIA Super Kiaturn 15/21/21L Electrical Diagrams (Fanuc Oi-TBVersion 05)

MI5A IBARMIA Column Drilling Machines A/35, A40, A50, B35, B40 and B/50. Service and Maintenance Instructions with a Parts Manual as Sectional Drawings and an Electrical Schematic.

IBP - see under PEDRAZZOLI (S.p.A.)

MI100 IKEGAI A-20 Lathe. Operator's Instruction Manual plus Separate ElectricalManual together with a well-illustrated and detailed 36-page Sales andTechnical Specification catalogue (blue on LP)

MI100P IKEGAI A-20 Lathe. Parts Manual as clear Exploded Component Drawings

MI100AA IKEGAI A-20 NC Lathe. Operator's Instruction Manual + ProgrammingFundamentals Manual.

MI100B IKEGAI FX-20N NC Lathe. Detailed Operator's Instruction Manual with a2-volume manual "FX20N Fanuc-FX Increment. System M".

MI120 ILLIG ( Adolf Jllig) "Skinpackaging, Sealing and Blow Formingmachines" Types SB 53c-c6, SB 74c-c6, SB 100c-c6 and SB125c-c6. DetailedInstruction and Set-up Manual

MI150 IMOBERDORF Transfer Machine Type 168. Operator's Instruction andMaintenance Manual including Program Control, Indexing Rotary Tables, etc. anda Large Electrical Schematic.

MI150A IMOBERDORF MB3 3 spindle Machine. Operation Instructions withSpecification Sheets for accessories.

MI200 IMPERIA TOOL and CUTTER GRINDER Type M6 (AR). Instruction Manual andSpare Parts as Exploded Component Diagrams and Cross-Sectional Drawings.Includes a copy of the maker's useful Technical Sales and Specification andAccessories Catalogue. (English and French text)

MI315 I.M.S. Universal Gear Hobbing Machine Model B11. Operator's InstructionManual.

MI320 INDEX 12, 18 and 25 Auto lathes. Operator's Instruction Manual withsections on Adjustments, Lubrication and Care of the Machine. Includes anElectrical Schematic.

MI320A INDEX 12, 18 and 25 Auto lathes. Spare Parts Manual as Photographs withseparate Electrical Connections Manual.

MI320AT INDEX Toolholders and Tools for Lathes 12, 18, 24, 25, 36 & 52.Detailed Dimensioned drawings.

MI320B INDEX 24, 36, 52 Single Spindle Automatic Screw machines. Operator'sManual.

MI320C INDEX E26 and E42 Single Spindle Automatic Screw Machines. Operator'sManual with Maintenance Instructions, Hydraulic Schematics, etc.

MI320C2 INDEX E26 and E42 Single Spindle Automatic Screw Machines."Maintenance Instructions Trouble Shooting". The first section containsguide-lines for routine care and servicing. The second section is intended tosimplify the detection and elimination of any troubles that arise.

MI320D INDEX B30, B42, B60 and B60F Turret-Type Bar-Automatic Lathes.Operator's Instruction Manual including 7 Supplementary Manuals: "DrivingAttachment (with Parts as Exploded Component Drawings); "Lubrication andDirections For care of the Machine"; High Speed Drilling Attachment; DeepDrilling Attachment; Cutout Attachment for Camshafts; "Electrical Controlsat Right-hand End of Front Camshaft" and a packet of Associated ElectricalDiagrams and Electric Motor Information. 310 pages. Highly detailed andcomprehensively illustrated.

MI320E INDEX B30, B42, B60 and B60F Turret-Type Bar-Automatic Lathes. SpareParts manual as Exploded Component Drawings

MI320F INDEX B30, B42, B60 and B60F Lathes Driving Attachment - SupplementaryManual with Parts Manual as Exploded Component Drawings.

MI322T INDEX Toolholders and Tools for Lathes B30, B42, B60 and B60F. DetailedDimensioned drawings.

MI320G INDEX C19 and C29 Turret Automatics. Operator's Instruction Manual withDetailed Cam Charts.

MI320H INDEX C19 and C29 Turret Automatics. GERMAN TEXT Operator's InstructionManual with Detailed Cam Charts.

MI320J INDEX C19 and C29 Turret Automatics. Spare Parts Manual with ExplodedComponent Drawings.

MI320GT INDEX Toolholders and Tools for Turret Automatic Lathes C19 and C29.Dimensioned Drawings.

MI320K INDEX DG12 and DO12 Lathes. Detailed Operator's Instruction Manual withbasic Maintenance.

MI320L INDEX DG12 and DO12 Lathes. Spare Parts Manual with Photographs andExploded Component and Sectional Drawings.

MI320LT INDEX Toolholders and Tools for Lathes DG12 and DO12. DetailedDimensioned drawings.

MI320M INDEX ER16 and ER25 Program Controlled Automatics. Operator's Manual.

MI320MP INDEX ER16 and ER25 Program Controlled Automatics. Spare Parts Manualwith exploded photographic views.

MI320N INDEX ON-12 Automatic Lathe. Construction and Use Manual. Highlydetailed and comprehensively illustrated.

MI320P INDEX "ON" and "OR" Automatic Lathes. Spares PartsManual.

MI320PT INDEX Toolholders and Tools for "ON" and "OR"Forming and Screw Making Automatic Lathes. Dimensioned drawings.

MI320Q INDEX 30 Instructions for Use and Designing and Laying Out Cams.

MI322 INDEX B30, B42, B60, B60F, C19 and C29 Automatic Lathes. Thread ChasingAttachment. Detailed Instruction Manual.

MI322A INDEX Eccentric Turning Attachment for Index 18 and 25 TurretAutomatics. Operator's Instruction Manual.
I80 INDEX - Booklet "Building Index Automatic Lathes" A facinating, detailed, well-illustrated account of how INDEX Automatic lathes were built during the 1950s from design, castings, machining the parts, the machine tools used (including the Tornomat Polygonal) production set-ups, the lathes' various ingenious mechanisms, assembling, and testing, etc.

- INDEX MILLERS (USA) - see WELLS INDEX - -

MI325 INDRAMAI Servo Drives MDC10 Installation Instructions, Technical Data andTechnical Documentation.

MI325A INDRAMAI 3-Axes Single Phase Thyristor Control Amplifier. InstallationInstructions, Technical Data and Technical Documentation.

MI350 INDUMA 1-S Turret Miller: Instruction Manual and Parts Manual as ExplodedComponent Drawings. Includes Electrical drawings and a copy of the maker'sdetailed Technical Sales and Specification Catalogue.

MI350A INDUMA 2U and 3U Milling Machines - late model with dial-control ofspeeds: Detailed Service Manual and Parts Catalogue as Sectional Drawings.

MI350AUR INDUMA 2UR Horizontal Milling machine Early model with lever controlof speeds. Operation and Maintenance Manual with Parts Manual as SectionalDrawings.

MI350B INDUMA 4U and 5U Milling Machines: Detailed Service Manual and PartsCatalogue as Sectional Drawings. English and German Text.

MI350BTD INDUMA 5U Milling machine. 2 blueprints of the motorised overarm.

MI350C INDUMA NL-48 Milling Machine. Operator's Instruction Manual with Partsas Sectional Drawings.

MI350D INDUMA NL-49 Milling Machine. Operator's Instruction Manual with Partsas Sectional Drawings, an Electrical Schematic and a copy of the maker's detailed and well-illustrated Sales & Technical Specification Catalogue.

MI350E INDUMA NL0-87 and NLO-75 Milling Machines. Operation manual with Parts as Sectional Drawings and an Electrical Schematic. The parts drawings are not very good, but clear enough to read.

MI350F INDUMA "Simplex Type" Vertical Milling Machine. Service Manualand Repair Parts Manual as Sectional Drawings and Photographs.

MI350G INDUMA VM70 (also applies to the VM60 and VM90) Milling machine.Operating Manual and Parts Manual as Sectional Drawings. Includes a copy of thedetailed and well-illustrated Sales & Technical Specification catalogue.

MI355 INDUSTRO-LITE Horizontal Milling Machine and Vertical Head: Care,Operation and Maintenance Instructions with Instructions for removing thespindle to replace the belt and Parts as Exploded Component Drawings. Includesa copy of the maker's sales & Technical Specification Catalogue.

MI360 INFRATIREA G25 Drilling Machine. Operator's Instruction and MaintenanceManual. English, French and German text.

MI370 INGAR PL-175 and PLB-175 Surface Grinder. Basic Operator's Hand book withSectional Sectional Drawing and Electrical Schematic.

MI370A INGAR PL-200 and PLC-200 Surface Grinder. Basic Operator's Hand bookwith Sectional Sectional Drawings.

MI370B INGAR RA-6 and RA-6H Universal Tool and Cutter Grinders. Operator's Handbook with 2 large Sectional Drawings of the whole machine and ElectricalSchematics.

MI370C INGAR RT-612 and RT-618 Surface Grinder. Basic Operator's Hand book withSectional Sectional Drawing and Electrical Schematic.

MI370D INGAR RT-618-2A Surface Grinder. Basic Operator's Hand book withSectional Sectional Drawing and Electrical Schematic.

MI370E INGAR RT-1024 Surface Grinder. Operator's Hand book with 4 largeSectional Sectional Drawings and Electrical Schematic.

MI400 INGERSOLL A500 Automatic Cutter Grinder. Installation, Operator'sInstruction and Maintenance Manual and a Parts manual as Exploded ComponentDrawings.

MI400A INGERSOLL (USA) "Installations of Milling Equipment."Wonderful publication, circa 1900-1910, showing the use of large millingmachines.

MI405AP INGERSOLL-Rand Type 40 Small Compressors Models 25, H25, L25 and 40 Compressors. Repair Parts as Exploded-componentDrawings.

MI405 INGERSOLL-Rand Type 30 Compressors. Repair Parts as Exploded-componentDrawings.

MI405PP INGERSOLL-Rand Type 30 Compressors. Instruction Manual with Installation, Pre-start Checks and Lubrication, Operation and adjustment, How to Regulate and a comprehensive Maintenance Sectionand many useful sectional drawings.

MI405A INGERSOLL-Rand Straight-Line, Horizontal Heavy-Duty Compressor (Probablymarked: ES, ER, FR and FS). Operator's Instruction and MaintenanceInstructions.

MI405B INGERSOLL-Rand SSR-2000 rotary Screw Compressors. Operator's Instructionand Maintenance Instructions including Electrical Schematic.

MI405C INGERSOLL-Rand SSR-2000 rotary Screw Compressors. Parts Manual as ExplodedComponent Drawings.

MI405D INGERSOLL-Rand Model 15T Compressors. Parts Manual (Repair parts Book) as ExplodedComponent Drawings.

MI450 InLand MOTOR SPA, SPAR, TPA and TPAR Series 1-phase and 3-phase SCR ServoAmplifier . Manual and Applications Guide.

MI470 Institution of Mechanical Engineers (IME). On original copy of the 1940edition "Acceptance Test Charts for Machine Tools"

INTERNATIONAL MACHINE TOOL CORPORATION = see under LIBBY

MI480 INTERWOOD Router OFN, OFC and OFL. Operator's Instructions. Includes acopy of the maker's detailed and well-illustrated Technical SpecificationCatalogue.

MI500 INVICTA (also badged Elliott)Shaper Models: 2MR, 4MR, 5MR and 6MR and INVICTA Series 2M. 4M, 5M, 6M,14M, 18M, 24M, 30M (14" to 30" inch stroke). A complete data packingconsisting of two Operating andMaintenance Manuals and Parts Manuals and 48 additional pages of detailed Salesand Technical Specification Catalogues.

MI500A INVICTA (also badged Elliott)Shaper Models: 18", 24" and 30" (sometimes labelled"Invicta 30 Major") Operator's and Maintenance Manual and IllustratedParts Manual. Includes a set of Sales and Technical Specification Catalogues.

MJ5 Jackman (England) Flat-Surface Disc-type Surface Grinders. Instruction Manual and a detailed, all-models Catalogue.

MJ8 Jackson & Bradwell Electronic Balancing Machines. Operator's Instructions.

MJ10 JAESPA Horizontal Bandsaw Type W-260 Automatic. Operating & ServiceInstructions with electrical schematics.

MJ10A JAESPA Horizontal Bandsaw Type W-260 Operating & ServiceInstructions.

MJ10B JAESPA Horizontal Bandsaw Type 260. Spare Parts Manual as SectionalDrawings. Includes a useful and detailed Sales and Technical SpecificationCatalogue that describes how the machine works and its various adjustments.

MJ20 JAFO JAROCIN FWA/M and FYA/M Milling Machines (Poland - MetalexportFabryka Obrabiarek Specjalnych "Ponar-Poznan"). OperatingInstructions Service Manual.

MJ20A JAFO JAROCIN (Poland - Metalexport Fabryka Obrabiarek Specjalnych"Ponar-Poznan") FWD-25 and FYD-25 Milling Machines. ServiceInstructions with Electrical Diagrams.

MJ20AU JAFO JAROCIN (Poland - Metalexport Fabryka Obrabiarek Specjalnych"Ponar-Poznan") FWD-25U Milling Machine.Service Instructions andTechnical Description. Includes three Electrical Schematics. ServiceInstructions with Electrical Diagrams.

MJ20B JAFO JAROCIN (Poland - Metalexport Fabryka Obrabiarek Specjalnych"Ponar-Poznan") FWD-25, FYD-32 and FYD-25 Universal and VerticalMilling Machines (Poland - Metalexport). Spare Parts as Sectional Drawings

MJ20C JAFO JAROCIN (Poland - Metalexport Fabryka Obrabiarek Specjalnych"Ponar-Poznan") FWD-32U SERIES Universal Milling machine (Poland -Metalexport). Operator's Instruction Manual with Parts Manual as SectionalDrawings. Includes a separate Electrical Manual with fold-out wiring diagrams.

MJ20D JAFO JAROCIN (Poland - Metalexport Fabryka Obrabiarek Specjalnych"Ponar-Poznan") FWD-25, FYD-25, FWD-32 & FYD-32 Universal andVertical Milling Machines (Poland - Metalexport). Operation Instructions, SpareParts Manual as sectional drawings and Electrical Schematics.

MJ20E JAFO JAROCIN (Poland - Metalexport Fabryka Obrabiarek Specjalnych"Ponar-Poznan") FWD-25, FYD-25, FWD-32 and FYD-32 Electrical Equipmentand Wiring Diagrams.

MJ20F JAFO JAROCIN (Poland - Metalexport Fabryka Obrabiarek Specjalnych"Ponar-Poznan") FWD-25, FWA/M and FYA/M Milling Machines (Poland -Metalexport). Spare Parts Listings (no illustrations).

MJ20G JAFO JAROCIN (Poland - Metalexport Fabryka Obrabiarek Specjalnych"Ponar-Poznan") FWF-32 Series Universal Milling Machine. Operator'sInstruction and Maintenance Manual with Electrical Schematics.

MJ20H JAFO JAROCIN (Poland - Metalexport Fabryka Obrabiarek Specjalnych "Ponar-Poznan")FWH-32A Horizontal Milling Machine. Operator's Instruction and MaintenanceManual with Parts as Sectional Drawings.

MJ20J JAFO JAROCIN (Poland - Metalexport Fabryka Obrabiarek Specjalnych"Ponar-Poznan") FYD-32 Dedicated and detailed single-model ServiceManual with a Parts Manual as Sectional Drawingsl Drawings.

MJ20K JAFO JAROCIN (Poland - Metalexport Fabryka Obrabiarek Specjalnych"Ponar-Poznan") FC25 and FC26 Horizontal Milling Machines. Operation and ServiceManual with a Parts Manual as Sectional Drawings and Electrical and Hydraulic Schematics.

MJ20K JAFO JAROCIN (Poland) - four large Electrical Diagrams for the FWD 25U, FWD 32U, FYD 25U and FYD 32U.

MJ30 Jaguar CD 0.75 to 7.5kW 1-phase to 3-phase Inverter. Detailed User's Guidefor drives built after July 1989 and fitted with Version 6 Software (Manualreference: DCA 6/89 Code 0177-7007)

MJ50JAKOBSEN SJ-12 Surface Grinding Machine Model. Operator's Instruction Manualand Spare Parts Manual with detailed Sectional Drawings of main and all subassemblies. Includes all the different pages from 2 editions showing differencesbetween early and late models. Includes an Electrical Schematic.

MJ50A JAKOBSEN SJ-16 & SJ-30 Surface Grinding Machine Model. Operator'sInstruction Manual together with Spare Parts Manual with detailed SectionalDrawings of main and all sub assemblies.

MJ50B JAKOBSEN SJ-24 Surface Grinding Machine Model. Spare Parts Manual asuseful Exploded Component Drawings. Includes a copy of the maker's Sales andSpecification Catalogue.

MJ50C JAKOBSEN SJ-25 Surface Grinding Machine Model. Spare Parts Manual asuseful Sectional Sectional Drawings.

MJ52 JARBE F2, F3, F4, F2H, F3H & F4H Milling Machine. Service Manual withParts as very useful Sectional Drawings. Includes an electrical diagram anddetails of the "Huron" vertical head - though this section (withuseful drawings and layout diagrams) is in Spanish. Main manual has English,French, German & Italian text.

MJ52A JARBE Universal Miller. Instruction Manual. Italian Text.

MJ60 Jason 3-inch Model and Clockmaker's Lathe. Operating Manual with PartsManual as Sectional Drawings. Also sold with Randa badges. clickhere for pictures.

MJ65 JASPER 2CR Milling Machine. Installation and Operator's Instruction Manualwith Electrical Schematics and a copy of the maker's Sales and SpecificationCatalogue.

MJ70 JATOR CAPSTAN LATHE Models 190-42, 190-50 and 175-36: Operator's Instruction andMaintenance Manual with Electrical Schematic and copies of the maker's Sales & Technical Specification Catalogues.

MJ70A JATOR CAPSTAN LATHE Model 140-26 and 140-40: Operator's Instruction andMaintenance Manual with Electrical Schematic and copies of the maker's Sales & Technical Specification Catalogues.

MJ72 Jenny (Jenny Pressen AG) Type ARP Fully Automatic Straightening Press. Detailed Operating and Computer Instructions.

MJ73 JERVIS PRESSES. Service Manual and Parts List as Sectional Drawings (8pages).

MJ374 JET Lathes GH-1340W & 1440W Operation & Maintenance Manual

MJ74A JEYMA Tool & Cutter Grinder. Operating Instructions.

MJ74B JEYMA TFC5th Three-dimensional Copy Milling Machine. OperatingInstructions with scaling up and scaling down tables and instructions on how touse the calculator.

MJ75 JIG BORING - a comprehensive 160-page explanation of traditionaljig-boring techniques and jig borers. The only known book on the subject.

MJ80 JOEMARS EDM (Electrical Discharge Machine) Models AZ Series, Operator'sInstruction Manual.

MJ85 JOHANSSON Cylindrical Grinding Machines 1U, 2U and 2P. Operator'sInstruction and Maintenance Manual with Parts Manual as Sectional and 3DDrawings.

MJ90 JOHNFORD Vertical Turret Miller 4AS and 4AVS (also badged as the GateProfitmill and "Roundtop"). Operator's Instruction Manual and PartsManual as Exploded Component Drawings. Includes an electrical schematic.

MJ90A JOHNFORD 5H and 5Vh Vertical and Horizontal (turret) Milling Machine(also badged as a Gate). Operator's Instruction Manual and Parts Manual asExploded Component Drawings. Includes an electrical schematic.

MJ100 Joinville 9-inch Lathe - South Bend Copy. The best Manual for this latheis the one produced in England for the South Bend clone by Boxford. Unlike theSouth Bend book "How to Run a Lathe" this 137-page editionconcentrates in detail on the 9-inch lathe, not the whole range, and thuscontains much more information about how to operate it as well as manyscrewcutting charts, lists of changewheels set-ups as machines left thefactory, metric conversions and other valuable data. A few mechanical detailsare different but the operating procedures are identical. Includes a Parts Listas Exploded Component Drawings.

MJ110 Jones Machine Tools (Pootatuck USA) - kit-built from castings.
7-inch bench lathe: 3 pages of "manufacturing" and one generalarrangement drawing.
"Tyro" bench lathe: 4 pages of Drawings plus general arrangement.
"Modelmaker" bench lathe: 7 pages of Drawings plus general assembly.
No.1 Bench Milling Machine: 2 pages of Drawings plus general arrangement.
No. 2 Bench Milling Machine: 2 sheets of Drawings plus general arrangement.
No. 10 Bench milling machine: 2 pages of Drawings. Milling Machine Accessories,3 pages of Drawings.
6-inch Stroke bench Shaper: 3 pages of Drawings plus general arrangement.
(about ) for the complete set.

MJ111 Jones Machine Tools (as above) plus the maker's advertising catalogue andprice list.

MJ115 JONES and LAMSON Ram Type Turret Lathes - All Models Instruction Book andParts Manual as Photographic plates.

MJ115A JONES and LAMSON Automatic Thread Grinding Machine 5" x 30"and 6" x 36" Models. Detailed Operator's Instruction Manual (plus brief maintenance details) with many useful Sectional Drawings and comprehensive photographic coverage ofthe different electrical control panels - but no electrical schematics.

MJ115AA JONES and LAMSON Automatic Thread Grinding Machine 6" x 36"and 12" x 45" Models. Detailed Operator's Instruction Manual (plus brief maintenance notes) with many useful Sectional Drawings.

MJ115B JONES and LAMSON TG-6 x 36 and TG-12 x 45 Automatic Thread GrindingMachine (6" x 36" and 12" x 45") Models. DetailedOperator's Instruction and Maintenance Manual with Detailed Sectional Drawingsand comprehensive details of the Electrical Operations.

MJ115C JONES and LAMSON Precision Boring Machine with 6.75-inches from top oftable to spindle centre line. Operator's Manual

MJ115D JONES and LAMSON Saddle Type Capstan Turret Lathes. Instruction Book and Parts Manual.

MJ115E JONES and LAMSON No.5 Ram Type Turret Lathe. Large Operation and Detailed Service Manual and a Parts Manual as Exploded-component Drawings.

MJ115F JONES and LAMSON No.7 Saddle Type Turret Lathes. Detailed Operation and Service Manual and a Parts Manual as Exploded-component Drawings. Includes a copy of the maker's Sales and Technical Specification Catalogue.

MJ115G JONES and LAMSON Models E-2 and E-3 Automatic Form Grinder. Detailed Operation and Service Manual and a Parts Manual as Exploded-component Drawings. Includes a copy of the maker's Sales and Technical Specification Catalogue.

MT160 JONES and SHIPMAN 60-page Tool and Cutter and Other Grinding Principles.Explanatory Booklet that details what must be adhered to for successfuloperation of a Tool, Cutter and other Grinders. Shows specific examples withwonderful photographs and explanations. The instructions are also applicable toother makes of cutter grinder. Includes a copy of the Jones and Shipman Tooland Cutter Grinder Sales and Specification and Accessories Catalogue

MG885b GRINDING: PRECISION GRINDING TECHNIQUES - Jones and Shipman. PrecisionGrinding Techniques - a Primer. Covers the essential basics of Surface, Tool,Cylindrical Internal precision grinding. 87 pages.

MJ120e Jones and Shipman. Operator's Instruction Manual that covers theessential details of all the company's grinders of the 1930s and 1940s.

Not sure which model of older Jones and Shipman you have? Just email aphotograph to: manuals@lathes.co.uk

MJ 140 Jones and Shipman 10" x 27" Universal (cylindrical externaland internal) Grinder. An older model possibly marked on the maker's plate asthe Types 138, 140 or 144. Operator's handbook.

MJ150 Jones and Shipman 150 HONING MACHINE: Operator's Instruction andMaintenance Manual with Parts Manual as Sectional Drawings.

MJ126 Jones and Shipman Radial Grinding and Wheel Forming Attachment. Listedunder various model names including X9 and X900. Instruction Book.

MJ158C Jones and Shipman 300X3 Radius and Angular Wheel Forming Attachment.Operator's Instructions.

MJ305 Jones and Shipman 305 Tool and Cutter Grinder. Operating and MaintenanceManual.

MJ310 Jones and Shipman 310 Tool and Cutter Grinder. Operating and MaintenanceManual with the Parts Manual as annotated photographs.

MJ310P Jones and Shipman 310 Tool and Cutter Grinder. Parts manual.

MJ310F Jones and Shipman 310 Machine a Affuter Les Outils. LivreD'Instructions. Texte en Français.

MJ310T Jones and Shipman 310T Tool and Cutter Grinder with Tilting andSwivelling Head. Operating and Maintenance Manual.

MJ311 Jones and Shipman 311 Tool and Cutter Grinder with Tilting and SwivellingHead. Operating and Maintenance Manual.

MJ311-P Jones and Shipman 311 Tool and Cutter Grinder Parts Manual as usefulSectional Drawings.

Jones and Shipman 520Miniature Precision Cylindrical Grinder. There never was a manual for thismodel - but instead a well-produced 8-page booklet plus three extra salessheets showing the extent of the machine's capabilities.

MJ124 Jones and Shipman 540 Hydraulic Surface GrinderOperator's and Maintenance Manuals. A complete Data Pack for this popularmachine which, although basically the same throughout its production life,underwent numerous small mechanical, hydraulic and electrical changes. Thiscomposite Operating and Maintenance Manual contains three Manuals: early,middle and late covering all models and years of production including the powerrise and fall types; 9 different electrical/connection diagrams; hydraulicschematics; Operating & Maintenance Instructions for the Westwind Air-BearingConversion; Instructions for the Eclipse Permanent Magnetic Chuck; details ofthe Phillips Clarifier System and early and late detailed Technical Sales,Specification & Accessory Catalogues. Also included are detailedspecification sheets (originally issued separately) for the DiaformWheel-forming Attachment; P.G. Optidress Wheel-forming (optical-control)Attachment; Radius and Angular Wheel-forming Attachment; P.G. Optical DividingHead; Magnetic Chuck and Surfacing Plates; Universal and Angular Sine Vices andthe Coolant Clarifer

MKL50 KAESER Roll GrinderModel LCL. Basic Operation & Maintenance Manual.

MK80 KARGER Lathes DZ20, DZ32 and DZ42, DL2 and DL3,. Instruction andMaintenance Manual with some useful sectional drawings. English and GermanText.

MK100 KAINDL Drill Grinding Jig BSG60. Operator's Instruction and MaintenanceManual.

MK115 KALTENBACH KKS, SKL and RK Circular Saws. Operating and MaintenanceManual

MK115A KALTENBACH HDM Cold Saw. Instructions, Starting up, Operator'sInstruction and Maintenance Manual

MK117 KAMPH FK-1 Die Sinker. Operation & Maintenance Manual

Kand UX - see under Matrix

MK118
KART ROYAL E2n-MH - by TECHNOIMPEX. Operator's Instruction Manual and PartsManual as Sectional Drawings. Includes reproductions of the screwcutting andspindle-speed charts and electrical diagrams.

MK119 KASHIFUJI KS-14 GearHobbing Machine. Detailed Operating and Maintenance Instructions with hydraulicSchematic, Foundation Plans, Lubrication Diagrams, details of the elecricalsystem with three Electrical Schematics, electro-magnetic clutch, generaladjustments, adjustment adjustment of spindle bearings,hob saddle gibs,verticalfeed screw and backlash in index worm wheel. Clear instructions for setting thechangewheels, gears for vertical and horizontal feeds and charts fordifferential changewheels for Module and D.P. etc.

MK119A KASHIFUJI KS-14 Gear Hobbing Machine. Parts Manual as "SectionalExploded Component Drawings".

MK120 KASTO EBS 250-U, 320-U and 450-U Mechanical Saws. Instruction Manual withParts Manual as Detailed Sectional Drawings.

MK120A KASTO PSB 280-U Saw. Instruction Manual with Parts Manual as DetailedSectional Drawings.

MK120B KASTO BSM 190/240 Saw. Instruction Manual with Parts Manual as DetailedSectional Drawings and Electrical Schematic. English and German text. Includesa copy of the detailed Technical Specification & Sales Catalogue.

MK120C KASTO EBS 320-AU Saw. Instruction Manual with Parts Manual as DetailedSectional Drawings and Electrical Schematic. Only published with GERMAN TEXT.

MK120D KASTO EBS 320-U & EBS 450-U Saw. Instruction Manual with PartsManual as Detailed Sectional Drawings and Electrical Schematic. English Text

MK130 KC Wood Turning Lathe. Operator's Instruction Manual with Parts Manual asExploded Component Diagrams.

KEARNEY and TRECKER MILWAUKEE - for some models also see the 'CVA' entry.

MK170 Kearney and Trecker: Kearney and Trecker Model 2D Milling Machines(Rotary Head type): Instruction and Maintenance Manual - later full editionwith Appendix for power drive to the knee and revised lubrication instructions..00

MK170A Kearney and Trecker: Kearney and Trecker Model 2D Milling Machines(rotary head type): Parts Manual as Sectional Drawings. .00

MK170B Kearney and Trecker: Kearney and Trecker Tri-D Milling Head. Operator'sInstruction and Maintenance Manual with Parts as Exploded Component Diagrams..00

MK170E Kearney and Trecker: Kearney and Trecker (CVA) 2CE and 2E MillingMachines: Instruction Manual and Maintenance Manual. .00

MK170F Kearney and Trecker: Kearney and Trecker (CVA) 2CE Milling Machines:Parts Manual with complete high-quality Sectional Drawings of the wholemachine. .00

MK170G Kearney and Trecker: Kearney and Trecker (CVA) 2E Milling Machines:Single-model Instruction Manual and Maintenance Manual. .00

MK170H Kearney and Trecker: Kearney and Trecker (CVA) 2E Milling Machines:Parts Book as Exploded Component Diagrams. .00

MK170J Kearney and Trecker: (CVA) Dats Pack for the 2E, 2CE, 2CES and 3CEMilling Machines: Instruction Manual and (basic) Maintenance. Includes an ElectricalSchematic. .00

MK170K Kearney and Trecker: Kearney and Trecker (CVA) 3CE and 2CES MillingMachines: Parts Manual as high-quality Sectional Drawings. .00

MK170L Kearney and Trecker: Kearney and Trecker Model H Milling Machine PlainHorizontal, Universal, Vertical: Operator's Instruction Manual. .00

MK170M Kearney and Trecker: Kearney and Trecker Model H Milling Machine PlainHorizontal, Universal, Vertical: Replacement Parts Manual with ExplodedComponent Diagrams. .00

MK170N Kearney and Trecker: Kearney and Trecker Model H Milling Machine PlainHorizontal and Universal: Replacement - Alternative Parts Manual shown asSectional Drawings. .00

MK170P Kearney and Trecker: Kearney and Trecker 2H Milling Machine PlainHorizontal, Universal, Vertical and Automatic Cycle: Operator's InstructionManual. .00

MK170Q Kearney and Trecker: Kearney and Trecker Model 1H and 2H MillingMachines Plain Horizontal, Universal, Vertical and Automatic Cycle: ReplacementParts Manual with Exploded Component and Sectional Diagrams. Two publicationsare included, one early, one late. .00

MK170R Kearney and Trecker: Kearney and Trecker Model K Milling Machines PlainHorizontal, Universal, Vertical. Replacement Parts Manual with ExplodedComponent and Sectional Diagrams. .00

MK170S Kearney and Trecker: Kearney and Trecker 2K and 3K Milling MachinesPlain, Universal and Vertical: Instruction Manual. .00

MK170T Kearney and Trecker: Kearney and Trecker 2K and 3K Milling MachinesPlain, Universal and Vertical: Parts Manual as Sectional Drawings. .00

MK170U Kearney and Trecker: Kearney and Trecker (Milwaukee) Milling Machines:Illustrated Parts Manual for Attachments: with detailed Sectional Drawings ofthe units used on Models: 1H, 2HL, 2H, 2E, 1CH, 2CH, 2K, 2KM, 2CSM, 3H, 3K,3KM, 3CSM, 4CSM, 5CSM, 6CSM, 4H, 4K, 5H, 5HM, 2CK, 3CH, 3CK, 4CH, 4CK, 5CK and6CK. .00

MK170V Kearney and Trecker: KEARNEY and TRECKER S-Type (S-12 & S-15)Milling Machines Operator's Instruction Manual. These millers were made invarious forms: Plain Horizontal, Universal, Vertical and Ram Types, with anumber of different table sizes (S-12, S-15, etc.) and with differing ModelDesignations (205, 307, etc.) depending upon the year of manufacture.Operator's Instruction Manual. .00

MK170W Kearney and Trecker: KEARNEY and TRECKER S-12 and S-15 Milling MachinesMaintenance Manual with Dismantling Instruction Guides as written instructionswith diagrams and exploded-component drawings. Includes Hydraulic, Lubricationand electrical Schematics. These millers were made in various forms; PlainHorizontal, Universal, Vertical and Ram Types, with a number of different tablesizes (S-12, S-15, etc.) and with differing Model Designations depending uponthe year of manufacture. Maintenance Manual with Dismantling Instruction Guidesas Exploded Component Drawings. Includes 2 electrical wiring diagrams, 12hydraulic circuit diagrams with expected pump (and other) pressures listedtogether with the spindle, column and lubrication pressure adjustmentsexplained,. Includes a lubrication schematic. .00

MK170W-C12 Kearney and Trecker (Milwaukee) C12 Model 203 Milling Machine. Operation and Maintenance Manual with Electrical Schematic.

MK170X Kearney and Trecker: KEARNEY and TRECKER S-12 Milling Machine. PartsManual as Exploded Component Drawings .00

MK170X2 Kearney and Trecker: KEARNEY and TRECKER S-15 Milling Machine. PartsManual as Exploded Component Drawings .00

MK170Z Kearney and Trecker: KEARNEY and TRECKER 205 S-12 & 307 S-12 MillingMachines. Parts Manual as Exploded Component Drawings. These millers were madein various forms; Plain Horizontal, Universal, Vertical and Ram Types, with anumber of different table sizes and with differing Model Designations dependingupon the year of manufacture. .00

MK170ZP Kearney and Trecker: MK170ZP KEARNEY and TRECKER 205 S-12 & 307S-12 Milling Machines. Operator's Instruction Manual. .00

MK172 Kearney and Trecker: Kearney and Trecker TF Series. All-modelsInstallation Manual and Lubrication. .00

MK172A Kearney and Trecker: Kearney and Trecker 210-220, 310-320, 315-330,415-430 TF Series Milling Machines: Plain, Universal and Vertical. Operator'sInstruction Manual. .00

MK172B Kearney and Trecker: Kearney and Trecker 315-330 and 415-430 "T andF" Series Milling Machines: Plain, Horizontal and Vertical. Operator'sInstruction Manual. .00

MK172C Kearney and Trecker: Kearney and Trecker 315-330 and 415-430 TF SeriesMilling Machines: Plain, Universal and Vertical. Parts Manual as ExplodedComponent drawings. .00

MK172D Kearney and Trecker: Kearney and Trecker 215 TF-16, 220 TF-16, 315 TF-16and 320 TF-16 "T and F" Series Milling Machines: Plain, Horizontaland Vertical. Parts Manual as Exploded Component Drawings. .00

MK172E Kearney and Trecker: Kearney and Trecker Milwaukee-Mil 1200-1800 SeriesSimplex and Duplex "Milwaukee Milling Machines". Operator'sInstruction Manual. .00

MK172F Kearney and Trecker: Kearney and Trecker Milwaukee-Mill 1200-1800 SeriesSimplex and Duplex "Milwaukee Milling Machines". Operator'sInstruction Manual. .00

MK172G Kearney and Trecker: Kearney and Trecker Milwaukee-Mil 1200 Series BedType Production Milling Machine. Parts Manual as Sectional Drawings. .00

MK172H Kearney and Trecker: Kearney and Trecker MWC-65 Operator's InstructionManual. .00

MK172J Kearney and Trecker: Kearney and Trecker Milwaukee-matic Series EaMilling Machine. Machine Maintenance Manual with Parts as Exploded ComponentDrawings. .00

MK172K Kearney and Trecker: Kearney and Trecker KT-gemini-D Control SystemOperating Manual (Publication 883C). .00

MK172L Kearney and Trecker: Kearney and Trecker KT-modular-D ControlMaintenance Manual (Publication 894C). .00

MK172M Kearney and Trecker: Kearney and Trecker Table of Leads for Model 2EUniversal Milling Machines with metric leadscrews. .00

MK172N Kearney and Trecker: Kearney and Trecker Table of Leads for 8-inch and10-inch Model H dividing Head. .00

MK172P Kearney and Trecker: Lubrication Manual for "Milwaukee"Milling Machines. A complete guide covering the Horizontal, Vertical andUniversal Models of the Types: 1H, 2HL, 2H, 3H, 4H, 5H, 2K-2KM, 3K-3KM, 4K,1200 Simplex, 1200 Duplex, 1800 Simplex, 1800 Duplex, 1400 Simplex and Duples,2200 Simplex and duplex, Bridge Type vertical, Model D Tool & Die MillingMachine, Rotary Head Feed Box, Table Feed Gearbox.

MK172Q Kearney and Trecker Series 1000 and 2000 Bed-type Production MillingMachines. Detailed 42-page Sales & Technical Specification Catalogue withannotated control diagrams and clear explanations of how the machines function.

MK172R Kearney and Trecker Dial-a-Cycle 1400 & 1800 Series Milling Machines. Detailed Operator's Manual.

KEARNS BORERS: Besides the Kearns manuals below - others may be available.Phone: 01298-0871633 or email:tony@lathes.co.ukto enquire

MK318EX Using the Kearns Horizontal Borer. A Theoretical & Practical Exercisefor Engineering Students & Apprentices - "Making the Geneva WheelMechanism", A short, 5-section booklet explaining how a borer is used tomachine the castings, the driven & driving wheels, etc. A step-by-stepguide to a typical job.

MK318 KEARNS No.0 (OA, OB, Oc Models) Horizontal Boring and Facing Machine(including Optimetric Measurement System Types). Operator's Instruction andMaintenance Manual with Sectional Drawings and Electrical Schematic. Includes aseparate smaller manual issued with the early machines and a copy of thecomprehensive and useful technical Sales and Specification catalogue.

MK318A KEARNS No. 1 Horizontal Boring and Facing Machines. Operator's Handbook. Levelling, Lubricating, Shear Pins and Operating. Includes a copy of thecomprehensive and useful technical Sales and Specification catalogue.

MK318B KEARNS No. 2 and No. 3 Boring and Facing Machines. Operator'sInstruction, Installation and Lubrication Manual. Includes a copy of thecomprehensive and useful technical Sales and Specification catalogue.

MK318D KEARNS "S Type" Horizontal Borer: Operating and MaintenanceManual (including Optimetric Measurement System). Includes details for both the"Spindle" and "Facing Chuck" Models, an electrical schematicand a copy of the maker's detailed 65-page Sales and Specification Cataloguegiving, with superb photographs, much additional information about accessoriesand attachments for Kearns borers. This set of publications represents acomplete data pack for the Kearns S Type.

MK318P Kearns-Richards (also found badged Staveley) "Electrabore"Boring and Facing machine. Kearns-Richards (also found badged Staveley)"Electrabore" Boring and Facing machine. Two manuals in one coveringboth early and late machines ("round" and "angular"styling) and all sizes (A, B, C and D) and Versions: T, S, W, O, e.g. somebeing marked AT, BT, CT, ATX, ATY, ATZ, BTX, BTY, BTZ, CTZ, CTY, CTZ, AS, BS,CS, TA30, TB40, TC50, TC60, WA30/72, WB40/84, WB40/102, WC50/144, WC60/144,WC50/168, YA35, YB50, YC60, XA35, XB50, XC60, etc. Operator's Instruction andbasic Maintenance Manual together with a detailed Sales & TechnicalSpecification catalogue.

MK318G KEARNS-RICHARDS KR Horizontal Boring and Milling Machine. Instruction Manualand Parts Manual as useful Sectional and Exploded-component Drawings.

MK318H KEARNS-RICHARDS PR Series Horizontal Boring and Facing Machine Manual ofInstruction. This was issued together with, and intended to be used alongside,a very detailed 63-page Technical Sales and Specification, Accessories andTooling Catalog (also largely covers the PRT - the PR with a threadingfacility).

MK318J KEARNS-RICHARDS PR Series Horizontal Boring and Facing Machine"Tools and Equipment Catalogue"

MK318K KEARNS-RICHARDS SH75 Horizontal Boring and Milling Machine. InstructionManual and Parts as useful Sectional and Exploded-component Drawings.

MK318L KEARNS-RICHARDS SH125 Horizontal Boring and Milling Machine. InstructionManual with program print outs, Maintenance notes, etc.

MK318LSF KEARNS-RICHARDS SF125 Horizontal Boring and Milling Machine. Operator'sInstructions with program print outs, Maintenance notes, etc.

MK318LSE KEARNS-RICHARDS SE125 and SE150 Horizontal Boring and Milling Machine.Operating & Maintenance Manual.

MK318M KEARNS-RICHARDS TK40, TK40B, SB, SK and TK Horizontal Boring and MillingMachines (Sometimes marked Staveley). Detailed Instruction and MaintenanceManual and Parts as Sectional and Exploded-component Drawings.

MK318N/MR79C Kearns-Richards BTX40 Horizontal Borer. Operator's Instruction andMaintenance Manual with Parts Manual as Sectional Drawings.

MK318P Kearns-Richards B/K and WB Horizontal Borers. Operation &Maintenance Manual. (not a very good copy)

MK318Q Kearns-Richards Type 450 Horizontal Borers. Operation & MaintenanceManual. Includes a set of machine arrangement (sectional) drawings

MK318R Kearns-Richards SJ100 (SJ-100) Horizontal Boring and milling machine.Operation, Maintenance with a Parts Manual as Sectional Drawings..

MK318S Kearns-Richards 451P and 721P Horizontal Borers Operating and Maintenance Manual with an electrical Schematic and removal instructions for Traverse Selection, Drive and Feed gearboxes and the front spindle slide.

MK325 KEETONA-BATH Press Brakes. Parts List as Exploded Component Diagrams.

MK325A KEETONA CADET Guillotine. Operating and Maintenance Instructions withExploded Component Parts Drawings.

MK325B KEETONA Cramp Folding Machines Operating and Maintenance Instructionswith Exploded Component Parts Drawings.

MK325C KEETONA Initial Pinch Bending Rolls. Operating and MaintenanceInstructions with Exploded Component Parts Drawings.

MK325D KEETONA Pyramid Bending Rolls. Operating and Maintenance Instructions.

MK325E KEETONA HydroForm Universal Folding Machine. Instruction Manual andParts as Exploded component Drawings. Includes Electrical and HydraulicDiagrams.

MK325E/4 KEETONA HydroForm Mk. 4 Universal Folding Machine. Instruction Manualand Parts as Exploded component Drawings. Includes details of the Multiformprocess and the SC100 Microprocessor Control with Operating Instructions and anElectrical Diagram.

MK325F KEETONA K3 Folder. Instruction Manual and Parts as Exploded ComponentDrawings.

MK325G Keetona SHEARMASTER and SHEARMATIC Manuals: Shearmaster Service Manualwith Parts Appendix and Electrical Schematic together with the Keetona Shearmatic10-foot by 10g High-Speed Shear with Operating and Maintenance Instructions anddetails of the essential slideway, brake, clutch, hold-down and blade changingand adjustment settings, etc. These two publications appear to cover themajority of Shearmaster and Shearmatic models.

MK325H KEETONA HYDRO-CUT Squaring Shears. Operator's Instruction andMaintenance Manual with Electrical Schematic.

KEIGHLEY machine Tools - see under NEWALL-KEIGHLEY

MK330 KEMPSMITH Model G Milling Machines. Operation Manual with Parts manual asSectional Drawings.

MK335 KENDALL and GENT CVM 25 Vertical Milling Machine. Operating andMaintenance Manual with Sectional Drawings, an Electrical Schematic and a copyof the maker's Sales and Specification catalogue.

MK335A KENDALL and GENT CVM40 and CVM60 Vertical Milling Machines. Operatingand Maintenance Manual with Sectional Drawings and wiring diagrams. Includes acopy of the maker's Sales and Specification Catalogue.

MK335B KENDALL and GENT "KENCO" Screwing Machines. Operating Manual.Includes a copy of the maker's Sales and Specification catalogue.

MK340 KENT-OWENS 2-20 Hydraulic Milling Machine. Operator's Instruction andMaintenance Manual.

KERRY LATHES, DRILLS and other machines were often badged "Q and S"or "Qualters and Smith". The model designations were identical. Seethe Qualters and Smith section below. Some Harrison L5 lathes also appearedwith the Kerry badge and if you are uncertain which Kerry model you have lookfirst in the Kerry section of theArchive and then in the Harrison.

MK450 KERRY Mk.1, Mk.2 and Mk.3 (Type "AG" ) Lathe: A complete datapack with all know publications included: the Instruction and MaintenanceManual and two separate Parts Manuals - one for the screwed-nose spindle theother for the L00 fittings (these are in the form of useful sectional drawingsthat have been enlarged for clarity) and copies of both early and late Sales,Technical Specification and Accessories Catalogues.

MK450A KERRY LATHES 1124/1140 and 1324/1340 (with square styling).Instructionand Maintenance Manual and Illustrated Parts with Cross-Sectional Drawings.Includes a copy of the maker's Technical Sales and Specification Catalogue.

MK450B KERRY (Q and S) DRILL "Super 8" "Backgeared Type":Instruction Manual and Separate Parts Manual as Sectional Drawings; includescopies of early and late maker's comprehensive Technical Sales and SpecificationCatalogues. Covers all models: early "round" style A, B and S and thelater more "angular" Series "U". A complete data pack forthe machine.

MK450C KERRY (Q and S) DRILL "Drillmaster" Instruction Manual andParts Manual as Sectional Drawings; includes a copy of two early and latemaker's Technical Sales and Specification Catalogues.

MK450D KERRY (Q and S) DRILL Model "100" (P Series) Geared-head, No.3 Morse taper: Instruction Manual and Parts Manual as Sectional Drawings;includes a copy of the maker's Technical Sales and Specification Catalogue.

MK450E KERRY (Q and S) DRILL Model "125" (P Series) Geared-head No. 3Morse taper: Instruction Manual and Parts Manual as Sectional Drawings;includes a copy of the maker's Technical Sales and Specification Catalogue.

MK450F KERRY (Q and S) DRILL Model "150" (P Series) Geared-head, No.4 Morse taper: Instruction Manual and Parts Manual as Sectional Drawings;includes a copy of the maker's Technical Sales and Specification Catalogue.

MK450G KERRY (Q and S) DRILL Model "150" (H Series) Geared-head, No.4 Morse taper: Instruction Manual and Parts Manual as Sectional Drawings.

MK450H KERRY (Q and S) DRILL Model "150 AG" Geared-head: InstructionManual and Parts Manual as Sectional Drawings.

MK450J KERRY (Q and S) DRILLS RADIAL-ARM R3 and R4: Instruction Manual andParts Manual as Sectional Drawings; includes an electrical diagram and a copyof the maker's Technical Sales and Specification Catalogue.

MK450K KERRY E3 and E4 Radial Arm Drills (also sold as Qualters and SmithQSR-3, QSR-4, QSR-3E and QSR-4E) All types, both rise-and-fall arm andrise-and-fall table. Instruction Manuals and Parts Manuals as SectionalDrawings with Electrical Schematics. This is a 4-edition publication coveringall versions from first to last and includes a set of Sales & SpecificationCatalogues.

MK450L KERRY DRILLS RADIAL-ARM Type R.10: Instruction and Maintenance Manualand Parts Manual as Sectional Drawings; includes a copy of the maker'sTechnical Sales and Specification Catalogue.

MK450M KERRY DRILLS (Qualters and Smith) Drillmaster QDM 500, 625 and 750:Instruction Manual and Parts Manual as Sectional Drawings.

MK455 KERRY ULTRASONICS - Plastiscon Mk. 3 KS 3007, KS 6007 and KS 1207 PlasticWelders: Installation, Operator's Instruction and Maintenance Manual. Includes3 blue prints.

MK455A KERRY ULTRASONICS CD-50 Portable Stud Welder. Operator's Instruction andMaintenance Manual. Includes a Wiring Diagram.

MK455B KERRY ULTRASONICS CD-550 Portable Stud Welder. Operator's Instructionand Maintenance Manual. Includes a Wiring Diagram.

MK455C KERRY ULTRASONICS 3-stage Cleaning Equipment incorporating the KS2000Ultrasonic Generator. Operator's Instruction and Maintenance Manual.

MK460 KENCO Screwing Machines: All sizes from 2 to 4-3. Operating Manual.

MK460A KENCO Screwing Machines Model6-3. Operating Manual.

MK462B KENNEDY Miniature HACKSAWS Models 60 & 90. Sales & TechnicalSpecification Catalogues with Operation, Maintenance and Set-up Instructions. 8pages.

MK468 King (King Rich) Lathe Type KC-1440B.Operation and Maintenance Manual with Parts as Exploded Component Drawings.

MK470 KING (King Rich) TFY-515 Vertical Milling Machine. Instruction Manualwith Parts as Exploded Component Drawings.

MK470A KING (King Rich) TFY-1050 & TFY-1054 Vertical Turret MillingMachine. Instruction Manual with Parts as Exploded Component Drawings.

MK470B KING (King Rich) Turret Vertical Milling machine. Operator's Instructionand Maintenance Manual with separate Variable-speed Head Manual.

MK470C KING (King Rich) Milling Machine DPM (KR-B2CNC) Instruction Manual with Lubrication Schematic and a Parts Manual as Sectional Drawings.

MK478 KINGHORN Punching Press Model "Acorn" Type 120/8/10 OperatingInstructions. (not a first-class copy)

MK478A KINGHORN Press Brake Model 180/10 (applies to other models in the Series as well). OperatingInstructions and Spare Parts List with Drawings.

MK485 Kingsland J14 Power Punching and Shaping machine. Operator's Instructionand Maintenance Instructions.

MK485A Kingsland 115XS Hydraulic Steelworker.Operating Instructions withElectrical and Hydraulic Schematics.

MK485B Kingsland J18 Power Punching and Shaping machine. Operator's Instructionand Maintenance Manual.

MK485C Kingsland J21 Power Punching and Shaping machine. Operator's Instructionand Maintenance Manual.

MK485DKingsland TRIM-TUB Vibratory Finishing Machine. Installation and Operating Instructions.

MK490 TYF = see also under "TFY" below

MK495 Kira Drillmill KN-6V(h) Drill-mill with Fanuc Control. Operator'sInstruction Manual. Includes: Specifications, Transferring and installing,Preparations for test run, Operation of machine, programming in relation to themachine (not the full Fanuc manual), checking and Maintenance, troubleshooting. MK597 KISTLER Charge Amplifier Type 5001. Operating and ServiceInstructions.

MK496 Kitagawa Iron Works MAC-Mini NC Controller. Maintenance Manual

MK597A KISTLER Charge Amplifier Type 9001. Operating and Service Instructions.

MK500 KITAMURA MT-20B Lathe. Detailed Operator's Instruction and ProgrammingManual including a Separate Manual for Kitamura Hydraulic Chucks, and anOmega-80 IC Card System Operating Manual.

MK505 KITCHEN and WADE Radial Arm Drills Types E24, E25 and E26. A completedata pack for the machine including the Operator's Instruction Manual with 3detailed Sales & Technical Specifications Catalogues that containadditional annotated diagrams. with Sectional Drawings.

MK505-E31 KITCHEN and WADE Radial Arm Drilling Machine Type E31. Operator'sInstruction Manual with a number of useful sectional drawings.

MK505A KITCHEN and WADE Radial Arm Drill Type E32 Mark 1 and Mark 2. Operator'sInstruction Manual with Spare Parts Manual as Exploded Component Drawings andan electrical schematic. Also includes a detailed sales & TechnicalSpecification Catalogue.

MA685 Kitchen and Wade E33 Radial Arm Drill Mk.1 (some times badged ASQUITH).Instruction Book with useful Sectional Drawings. Also includes a dedicatedsales catalogue with annotated pictures and foundation drawings.

MK505B KITCHEN and WADE H15 Horizontal Boring, Drilling, Tapping and facingMachine. Operating Manual.

MK505C KITCHEN and WADE T9 Drilling Machines. Operating and Maintenance Manualwith Sectional Drawings and Electrical Diagram.

MK510 KITCHEN and WALKER E2 and E3 RADIAL ARM DRILLS. Operating and MaintenanceManual with Parts, Electrical Schematics and a set of the maker's Sales &Specification catalogues.

MK510B KITCHEN and WALKER E4 RADIAL ARM DRILL. Operating and Maintenance Manualwith Parts and Electrical Schematics. and a set of the maker's Sales &Specification catalogues.

MK510C KITCHEN and WALKER E5 RADIAL ARM DRILL. Operating and Maintenance Manualwith Parts and a set of the maker's Sales & Specification catalogues.

MK510D KITCHEN and WALKER V2 32-inch RADIAL ARM DRILL. Short Operating andMaintenance Manual with wiring diagram and large General Assembly Drawing.

MK510E KITCHEN and WALKER E38 800 Radial-Arm Drill. Operating Instructions withParts as Exploded-component drawings.

MK515 KLAIBER WS-11a Tool & Cutter Grinder. Instruction Manual withsectional drawing through the spindle and a copy of the maker's Sales,Technical Specification and Accessories Catalogue. GERMAM TEXT. p

MK520 KLINGELNBERG Hob Sharpening Machine AGW231 and AGW391. Parts as Sectionaldrawings.

MK520A KLINGELNBERG Hob Sharpening Machine AGW230 Change Gear Tables.

MK520B KLINGELNBERG PFS600 GEAR TESTING MACHINE with Makrograph Control Unit.Operator's Instruction and set-up manual with many useful sectional drawings.

MK523 KARL KLINT Broaching Machine RSI-8-DT and RSI-8-DT1 (with pull and lifthead locking). Operator's Instructions & Lubrication Manual with PartsManual as Sectional Drawings and Electrical Schematics.

MK525 KLOB JIG BORER TYPE OPCO 175 (Optical Jig Borer) Operator's InstructionManual and Sectional Parts Drawings and a copy of the maker's Sales & Technical Specification Catalogue.

MK525A KLOB "Waagerecht-Rundtisch-Flachschleifmaschine SBFR 060-40"Circular-table turret-head grinding machine. Instruction Manual with Parts asSectional Drawings. German text

MK525B KLOB Polygonal Turning Machine Tornomat Size 2. Operator's Instructions

KLOB - see also HAHN and KOLB

MK530 KNAPP UZFM 300H Rack Milling Machine: Instruction and Maintenance Manual.

MK540 KOEPFER 205/210 Rack Cutting Machine 205/210. Operating Manual with twoelectrical schematics.

MK540A KOEPFER Type 170 Gear Hobbing Machine. Operating Manual including anElectrical Schematic.

K.O.Lee - see under LEE below

MK550 KONDIA FV1 (FV-1) Vertical Turret Miller (Bridgeport-like clone) asmarketed by Clausing USA and others (and sometimes badged as the"Splendor"). Operator's Instruction and Maintenance Manual with aParts Manual as Sectional Drawings. Includes a wiring diagram (for the standardmachine), an additional Service and Instruction Manual for the KVVariable-speed head with Parts as Sectional Drawings and a copy of the maker'sdetailed Sales, Technical Specification & Accessories catalogue.

MK550A KONDIA FV1-NC Computer-controlled Vertical Turret Miller as above butfitted with MICRON NC Control System. Includes 7 electrical schematics.

MK550B KONDIA K76 Computer-controlled Milling Machine. 11 ElectricalSchematics and a listing of codes used for the Manual Control Panel (e.g. Decimal 02, Octal 02, Instruction LD, Element No. 400, Remarks Spindle Forward).

MK550C KONDIA K76. Service and Instruction Manual for Maintaining the Electronic Power Feed Unit.Includes an electrical schematic and Sectional Drawings of the Parts.

MK555 KOPINGS LATHE S12A. Operator's Instruction and Maintenance Manual andParts Manual as Sectional Drawings. Includes a copy of the maker's Sales,Accessories and Technical Specification catalogue.

MK555A KOPINGS F20 and UF20 Milling Machines. Operator's Instruction andMaintenance Manual and Parts Manual as Sectional Drawings with ElectricalSchematic.

MK555B KOPING VF2A Vertical Milling Machine. Operator's Instruction,Maintenance Manual, Parts Manual as Sectional Drawings and a copy of themaker's sales & Technical Specification catalogue..

MK565 KSM "No-Mark" StudWelder. Operator's Instruction Manual.

MK575 KOPP VARIATORS 100 Series (Allspeeds): Instruction, Maintenance andSpares as Sectional Drawings.

MK575A KOPP VARIATORS 300 Series (Allspeeds): Instruction, Maintenance andSpares as Sectional Drawings.

MK575B KOPP VARIATORS B Series (Allspeeds): Instruction, Maintenance and Sparesas Sectional Drawings.

MK590 KTK 6P4Q Speed-control of DC Motors Converter. Operation, Maintenance and Technical Data Manual with Electrical Schematics.

MK600 KTM 400-CNC, 500-CNC and 560-CNV Machining Centre. Maintenance Manual.

MK600A KTM 1500CNC and KTM 2500CNC Machining Centers. Maintenance Manual.

MK600B KTM 1500CNC and KTM 2500CNC Machining Centers. Parts Manual as clearExploded-component Drawings.

MK600C KTM HMC 1500 Milwaukee-matic. Parts Manual as clear Exploded-componentDrawings.

MK600D KTM FM100 Fleximatic Machining Centre. Maintenance Manual

MK600E KTM FM200 FM300 CNC machining Centre Sinumerik 8M Maintenance Manual.

MK600F KTM Floor Mounted Tool Magazine & Changer. Replacement Parts Manualfor the original and Mk. 2 Models

MK600G KTM ROEVATRAN RT 100, RT 100/1, RT200, RT 200/1, RT300, RT300/1.Replacement Parts Manual.

MK600H KTM FANUC Digital AC Spindle Servo Unit Installation & MaintenanceManual.

MK650 KURAKI MH-40 Operator's Instruction and Maintenance Manual (poorillustrations but perfect text)

MK720 KUHLMANN Copy Milling Machines NF1 and NF2. Detailed instruction Manualand Maker's Machine and Accessories Catalogues.

MK720A KUHLMANN Copy Milling Machine GM-11/3D. Detailed Instruction Manual anda copy of the maker's Sales & Specification Catalogue.

MK722 KUMMER Freres K20 High Precision, Double Spindle Lathe with Automatic Cycle. A maker's original copy of the Instruction Manual with Electrical Schematics and Maintenance Instructions.

MK722A KUMMER Freres Semi-Automatic Lathes. Parts Manual as Exploded Component Drawings. English, French and German Text.

MK725 KUNMING Pantograph Engraver Models X4220A and X4222A. Operator'sInstruction and Maintenance Manual with Electrical Schematics and somedimensioned Parts Drawings. Available with English or Chinese text.

MK750 KUNZMANN Miller UFV500. Installations and Parts Manual as SectionalDrawings (German text).

ML1 LACFER Lathes Models CR-1, CR-2 and CR2E: Instruction Manual. IncludesCross-Sectional Drawings of the entire machine, a wiring diagram and a copy ofthe 4-page Eide Electromagnetic clutch instructions. Text is in English, Spanish andGerman.

ML-01 LIANG DEI Lathe LD-1340S Operation Manual and parts as Exploded ComponentDrawings with a copy of the maker's Sales & Technical SpecificationCatalogue.

ML2 LAN BAT Multiangular Vertical Head. Operating Instructions with SectionalDrawings and Angular tables.

ML2A LANCASHIRE Dynamo Nevelin Ltd. Variable-speed Drive. Instruction Manualwith a large Electrical and General-arrangement Schematic.

ML3 LANCING BAGNALL FSEP-2 Pedestrian Controlled Electric Fork Lift Truck.Operator's Hand book and Maintenance Manual.

ML3A LANCING BAGNALL FRES2-1 Pedestrian Controlled Electric Fork Lift Truck.Operator's Hand book and Maintenance Manual. ML3B LANCING BAGNALL BatteryChargers C Range Models C1, C2 and C3. Operation and Maintenance Manual withParts Manual as Exploded Component Drawings. Contains fault-finding guides,circuit diagrams, circuit descriptions and charger adjustments.

ML4X Landis Cylindrical Grinding Manual. A complete guide to using Landiscylindrical grinders. Much information applicable to other makes as well.

ML4X2 "Modern Methods of Cylindrical Grinding". A well-illustratedand useful 28-page booklet explaining production methods and tolerancesachievable on a variety of typical jobs.

ML4 Landis Type H-4 Plain Hydraulic Grinder. Operator's Instructions.

ML4A Landis Universal & Cylindrical Grinding Machines Types 1, 1 1/2, 2, 3,4 (1920 and 1930s Models) Operator's Instruction, Maintenance and Spares PartsBook.

ML4C Landis UNIVERSAL GRINDER 10" x 20" Operator's InstructionManual.

ML4CH-LCH Landis 10-inch and 12-inch Types CH and LCH Cylindrical Grinders.Operator's Handbook with Parts as Sectional and Cut-away Drawings.

ML4D Landis 1-inch Type LC and 10" -12" -14" -16" -18"Type C UNIVERSAL GRINDERS: Operator's Instruction Manual and Parts Manual asSectional and Cut-away Diagrams.

ML4D2 Landis Type C 6", 10" & 14" Plain (cylindrical)Grinders. Operator's Instruction Manual.

ML4E Landis 1R 10" x 20" Universal grinding Machines. A complete datapack with Operator's Instruction Manual, Performance Records Brochure and theMaker's detailed Technical Sales and Specification catalogue.

ML4F Landis 2R 6" and 10" Semi-Automatic and Plain (Cylindrical)Grinding Machines. Operator's Instruction Manual. Includes a copy of the maker'sdetailed and useful 48-page comprehensive Technical Sales and SpecificationCatalogue showing all the "R" machines.

ML4G Landis 2R 6" and 10" Semi-Automatic and Plain (Cylindrical)Grinding Machines. Parts Manual as Exploded Component Drawings.

ML4H Landis 3R 10" and 14" Type Semi-Automatic and Plain(Cylindrical) Grinding machines. Operator's Manual. Includes a copy of themaker's detailed and useful 48-page comprehensive Technical Sales andSpecification Catalogue showing all the "R" machines.

ML4HP Landis Type 3R Grinder. Parts Manual as Exploded Component Drawings.

ML4J Landis 4R and 4RH 10", 14", 18" 4RH Semi-Automatic andPlain (Cylindrical) Grinding Machines. Operator's Instruction and MaintenanceManual (indifferent but readable copy); Parts catalogue as Exploded ComponentDrawings and a copy of the maker's detailed and useful 48-page comprehensiveTechnical Sales and Specification Catalogue showing all the "R"machines.

ML4JE Landis 4R. Pack of 14 large electrical drawings.

ML4K Landis 10" and 14" Cylindrical Grinder Parts Catalogue asExploded Component Drawings.

ML4L Landis R-Type Grinders. General Instructions.

ML4M Landis 16" Semi-Automatic CRANKPIN Grinding Machine. Operator's Handbook.

ML4M2 Landis Type 4R and 4RH Crankpin Grinders. Operation and MaintenanceManual with Parts Manual as Exploded Component Drawings.

ML4M5RR Landis Type 5R Crankshaft Main Bearing Grinder with Numerical Feed.Operator's Manual.

ML4M5R Landis Type 5R Crankshaft Main Bearing (Crankpin) Grinder. Parts Manual as ExplodedComponent Drawings.

ML4XX Landis Type 5R Fully Automatic Crankpin Grinder with Microtronic Feed. Operator's Manual z

ML4N Landis 5-inch Type R Cam Grinding Machine. Parts catalogue as ExplodedComponent Drawings.

ML4P Landis 5RIW Grinder ( 5R-IW Grinder). Comprehensive Instruction andMaintenance Manual. A complete data pack assembled by an end user and includingfactory updates and special instructions.

ML5A Landis Handbooks (2 editions) for Chasers & Die Heads: Operator'sInstruction and Maintenance Manual for Lanco Type R hand-operated machines,Lanco Head Type MR, Landex Heads Types J, JX, MJ & MJN for Automatic ScrewMachines, Landmatic Head Type A, F and MF for Turret Lathes. Includes grindingthreads with and without leadscrew feed, tapered pipe threads and rake or cuttingangles. General grinding instructions; setting Landis Chasers; Operation ofLandis Die Heads; left-hand threads; cleaning, adjusting, repairing andlubricating Landis Die Heads.

ML5B Landis Thread Cutting Equipment: Comprehensive Operator's Instruction andMaintenance Instructions for Die Holders, Tangential Thread Chasers, ThreadingHeads and Machines, Grinding Tap Chasers and the Operation of Collapsible Taps,Special threads, Care & Operation of Threading Machines, etc. 185 pages.

ML5C Landis No. 3 Pinner 60 Grinder. Electrical Manual (Circuit diagrams).

ML5D Landis Microtronic Feed Multi-Wheel Grinder, Crank Pin Grinder and Line Grinder. Electronics Manual. 2nd Edition for Mk.2 Feed Systems.

ML8 Landis (by Fay-Scott Landis) "Landis Chainstich McKay Sticher"Model 77. Operator's Instruction and Maintenance Manual and Parts asPhotographic Plates.

LANDIS-LUND GRINDERS - see under LUND below

ML10 LANG Junior Lathes up to the 1940s. Technical literature for theseearlier, smaller Lang lathes was sparse so a data pack has been assembled withall known publications consisting of: two editions (early and late) of the"Operation of Lang Lathes", a Combined Instruction Book for the13-inch and 17-inch Junior and a well-illustrated early Junior Sales Catalogue.

ML10A Lang Junior Lathes - later Mk. 2 Models. 13-inch and 17-inch. Operationand Maintenance Manual with Parts Manual.

ML10AA LANG B and CB Lathes: Detailed and very well-illustrated Operator'sInstruction and Maintenance Manual.

ML10B LANG J6 13-inch and 17-inch Lathe: Detailed Instruction Manual and Partsmanual as Component Photographs. Includes clutch adjustment instructions and acopy of the maker's Sales and Specification Catalogue.

ML10C LANG 8B, 8B2, 10B and 10B2 Lathes: Instruction Manual and Parts Manualwith Electrical schematic.

ML10D LANG A4 and CA4 (Models 12A4, 14A4, 33CA4, 42CA4) Lathes: InstructionManual and Parts Manual.

ML10E LANG 21D, 25D and 30D Lathes: Detailed and well-illustrated Instruction,Maintenance and Parts Manual. Includes the Maintenance Instructions for the BHIMulti-disc clutches.

ML10F LANG 16D, 16CD, 20D and 20CD Lathes: Detailed and well-illustratedInstruction, Maintenance and Spare Parts Manual. Instructions for the BHIMulti-disc clutches.

ML14 LANTAINE LAM 350-BH bench lathe. Operator's Instruction and MaintenanceManual and Parts List with electrical schematics. Two editions are included -one for which might have been a later version of the machine.

ML16LAPMASTER Model 15 Operator's Instruction Manual with Electrical Schematic and a Section on General Operating Methods for this class of machine.It can be ordered securely online here where can choose to pay by most credit and debit cards - or PayPal: https://www.store.lathes.co.uk/print/ML16

ML16ALAPMASTER LM24/700/36 "27" Series. Operator's Instruction and Maintenance Manual.It can be ordered securely online here where can choose to pay by most credit and debit cards - or PayPal: https://www.store.lathes.co.uk/print/ML16A

ML16BLapmaster 12-inch, 24-inch & 36-inch High-precision Lapping Machines. Instruction Manual with an Electrical Schematic.It can be ordered securely online here where can choose to pay by most credit and debit cards - or PayPal: https://www.store.lathes.co.uk/print/MP16D

ML16C LAPMASTER 48" Lapping Machine. Operator's Instructions and Maintenance ManualIt can be ordered securely online here where can choose to pay by most credit and debit cards - or PayPal: https://www.store.lathes.co.uk/print/ML16C

ML18 LAPOINTE Broaching Machines Vertical and Horizontal Types includingL-Types, HP-Types, Small Vertical Pull Down, Vertical Hydraulic Presses, SingleRam Surface Machines, Double Ram Surface Machines, Hydraulic Pull Down Machinesand Universal Broach Sharpeners. Types: 2S-L, 2S-L6, 2L, 2L6,3L, 3L8, 3 1/2L,4L, HP-5, HP-15, HP-20, HP-30, HP-40, HP-50, HP-75, HP-100, SPD 4-12, SPD 6-18,SPD 8-24, SPD 10-24, the CPC range of Hydraulic Presses, SRV Models, DRVModels, V-1 to V-9 Models, : Operator's Instruction and Service Manual withElectrical and Hydraulic Schematics.

ML35 LARS Tool and Cutter Grinder - Deckel copy. The best manual for thismachine is the one for the DECKEL SOE. See under Deckel above

ML45 LARSSON CL-21 (Lidkoping-Larsson) Fine-boring Machine. Detailed Operatingand Maintenance Manual. Includes a copy of the maker's Specification and Salesand Specification Catalogue.

ML55 LARVIC Rehabilitation Wood-turning lathe (treadle-operated). InstructionBook. Two editions are included covering both the Mk.1 and Mk. 2 Machines

ML65 LAYco*ck 60-ton Hydraulic Press. Maintenance and Service Instructions.

ML68 LEADWELL MCH500 Service Manual. A comprehensive guide to the machine withParts as Sectional Drawings and FANUC System 10M-Model A Controls.

ML68A LEADWELL VMC-25 and VMC-40 CNC Machining centre (milling machine)Instruction Manual.

ML71 LeBLOND REGAL 10-inch Regal. For this lathe we can offer a data pack withthe 2 known relevant publications:
1) The original basic 15-page Manual and Instructions (that shows a copy of theoften polished and unreadable gearbox threading chart) - this is included in acopy of the LeBlond book "Running a Regal". This book deals, in avery comprehensive way, with all sizes of "Regal" lathes made duringthat period - originally printed as a 72-page small format edition this hasbeen enlarged to A4 to make it more readable and the illustrations clearer.
2) A superb 47-page Technical Sales Catalogue and Price List. Thisfirst-edition publication introduces the new, lighter LeBlond lathes and isfull of detailed technical information, useful Component Parts Pictures as wellas interesting company and factory information.

ML71A LeBLOND REGAL "Running a Regal" 1930s to 1940s. The firstLeBlond handbook that deals, in a very comprehensive way, with all sizes of"Regal" lathes made during that period. (72 pages, small format).Also included is a superb 47-page Technical Sales Catalogue & Price List.This first-edition publication introduces the new, lighter LeBlond lathes andis full of detailed technical information, useful Component Parts Pictures as wellas interesting company and factory information.
Pictures of these early Regal lathes can be seen here: www.lathes.co./regal.

ML71B LeBLOND REGAL LATHES (13" to 19") early 1940s to late 1950s. Thesewere designated: A = 10", B = 13", C = 15", D = 17" E =19", F = 21", H = 24". The lathes remained largely unchangedmechanically from their introduction until the late 1950s - although the standsand drive systems were modernized to make the machines more compact. Operation,& Maintenance Manual, with Parts Manual shown as Exploded ComponentDrawings. 98 pages, large format - and includes a very useful updated versionof the original LeBlond Book "Running a Regal" and a copy of the MakersRegal Sales Catalog. GBP40
Pictures of this revised type can be seen here: regal 1940s and 1950s.

ML71C LeBLOND and "LeBlond MAKINO" Instruction & IllustratedParts Manual (as detailed Cross-Sectional Drawings) for the later"Regal" lathes from the late 1950s through to the 1980s: Models13" (C3), 15" (C5), 17" (E3) and 19" (E7) including theServo-shift and sliding bed types. Pictures of this revised type can beseen here: Regal late 1950sonwards.

ML71E LeBLOND: 12", 14", 16" & 18" lathes in Engine,Toolroom and gap-bed forms and the 19" to 38" sliding-bed models.These were heavier, industrial-class LeBlond lathes made from the 1930s to theearly 1950s. Service & Instruction Manual. GBP35

ML71F LeBLOND "Dual Drive" Mk.1 Instruction and Illustrated PartsManual as detailed Cross-Sectional Drawings. This is for the lathe with thefront face of the headstock "rounded".

ML71F2 LeBLOND "Dual Drive" Mk. 2 Instruction and Illustrated PartsManual as detailed Cross-Sectional Drawings. This is for the later Dual Drivewith a flat face to the headstock.

ML71G LeBLOND 14" and 16" Tool and Diemaker Precision Lathe.Instruction Manual and Parts Manual as detailed Sectional Diagrams.

ML71G/20 LeBlond 20-inch Heavy-duty Engine Lathe. Service Manual with PartsManual as sectional Drawings.

ML72H LeBLOND 25", 27", 30" and 32" Heavy-duty lathes -plain, gap bed, sliding bed, hollow spindle models: Installation, Operator'sInstruction, Maintenance and Parts Manual as Sectional Drawings.

ML71J LeBlond "Multi-cut Lathe" Guide to the lathe with Settings andWork Examples.

ML71K LeBlond AUTOMATIC Lathes. Detailed Operator's and Maintenance Manual withTypical and Special Cam and Tooling Layouts and Parts as Sectional Drawings.

ML71L
The LeBlond Tool & Cutter Grinder was sold before the advent of dedicatedInstruction books. However, the following publication is that produced by LeBlondand intended to be used by them as a guide to using the machine effectively.
LeBlond Universal Tool & Cutter Grinders & Accessories. Detailed andwell-illustrated 70-page Sales & Specification Catalog-cum-Instruction Bookwith headings that include: General Descriptions (of construction and layout)
Specification of the machine (and descriptions of accessories)
Equipment
Emery wheels
Operation and Care
Remarks on Grinding (hints and tips for use)
Illustrations of typical jobs and the employment of accessories including theplain machine between centres, the Universal Attachment, CylindricalAttachment, Internal Attachment, Gear Cutter Attachment, Surface GrindingAttachment, Power Automatic Feed to the Table, etc.

L76 LeBLOND REGAL Lathes. A superb, 47-page Full-range Technical Sales andSpecification Catalogue and Price List 1931. This first-edition publicationintroduces the new, lighter LeBlond lathes and is full of detailed technicalinformation, useful Component Parts Pictures as well as interesting company andfactory information.

ML85 K.O.LEE Universal Tool and Cutter Grinders. Very detailed 127-pageInstruction Book. Covers most models (and the principles of cutter grinding)including the B360, BA960, BA962, B2060, B2062, B6060, B6062, B300, BA900 andB2000. Machines were stamped with various suffix letter combinations and themanual applies to them all. Examples include "X" and "Y"for special-equipment models, "H" for hydraulic table travel, "BB"for ball-bearing mounted flat and V-rollers for anti-friction table travel,"M" for metric calibration of dials, etc.

ML87 Lees Bradner 7HD Gear Hobber. Detailed Operation, Maintenence and Parts Manual with Electrical Diagrams and Technical Drawings.

ML87A Lees Bradner HT and LT Thread Milling Machine. Operation and Service Manual

ML88 LIEBER & GÜRTLER DLZ300 Lathe. Installation, Operation and MaintenanceManual. GERMAN TEXT (this is a po0r quality reproduction but readable).Contains a detailed, high-quality 22-page Sales & Specification Cataloguein English.

ML89 LEINEN LZ4S and MLZ 4S and SK (the ML21SB looks similar) Super-precisionlathe: Operating Manual with Sectional Drawings, Maintenance and AdjustmentSections, Wiring Diagram, and copies of the often damaged or missingscrewcutting and feed charts, etc. Includes works drawings of the "Multiplicator" screwcutting gearbox and copies of all the associated LeinenSales and Specification Literature.

ML89B Leinen LZ (early) Precision Lathe. Manual with GERMAN TEXT. IncludesIllustrated Parts Drawings with sections through the headstock tailstock,screwcutting gearbox, compound slide-rest assembly and countershaft drive unitand an electrical schematic. This lathe is an early version of the MLZ4 withlever rather than dial-controlled screwcutting gearbox. Includes works drawings of the "Multiplicator" screwcutting gearbox and a copy of themaker's Technical Sales and Specification Catalogue in English containinguseful capacity, screwcutting and alignment charts. German text in the manual.

LEINEN: Unfortunately there appear to have been no "Manuals" producedby the company for their range of older flat-belt drive Precision plain-turningand Screwcutting Lathes, nor for the watchmakers' lathes. However, a largeselection of interesting and well-produced technical advertising literature isavailable here - -

LM91 LEMPCO (Bedford Ohio, USA) Model KG Crankshaft Grinder. Detailed Operation Manual with Adjustment Instructions.

ML93 Leonard-Douglas Bendmaster Models MB. Detailed Instruction Manual withRepair Parts as Sectional Drawings.

ML95 LESTO (bar-bed lathe made in Switzerland) - see under Scinta and Scintilla

ML97 LEVIN LATHES - Installation, Operation and Maintenance Manual. Includes a1973 through 1978 Lathes and Accessories Catalog.
<![if !supportLineBreakNewLine]>
<![endif]>

ML97A LEVIN LATHES - Data Packconsisting of: Installation, Operation and Maintenance Manual and the followingcatalogs. LEVIN (USA) Precision lathes:Full Lathe & Accessory Catalogue. Dated 1950. 32 pages. LEVIN (USA) Precision lathes: Full Lathe& Accessory Catalog. Dated 1954. 36 pages. This is the first of theimproved "glossy-photograph" editions. LEVIN (USA) Lathe Accessories, Heavy-duty Slide Rests, CircularSaws, Collets, Turret Tooling, Micro Drilling, Micro Drills. Publication circa1960. 12 pages. LEVIN (USA) PriceLists: 1950, 1953 and 1958.12 pages.LEVIN (USA) Precision Lathes, Drills & Accessories Sales &Technical Specification Catalog 1963. 40 Pages. LEVIN (USA) Precision Lathes, Drills & Accessories Sales& Technical Specification Catalog with price lists 1972. 46 Pages. LEVIN (USA) Precision Lathes, Drills &Accessories Sales & Technical Specification Catalog 1973 through 1978. 31Pages.

LEYLAND -GIFFORD "Hybco"Cutter Grinder - See under Hybco

M1005 LIBBY (International machine Tool Corporation) Type H Turret Lathe.Erection, Operator's Instruction Manual and a Parts Manual as Clear Sectional drawings.

ML100A LIBBY Type 4A Universal Ram Type Turret Lathe. Parts as DetailedSectional Drawings.

ML101 LIBERTY (Axelson-Liberty) Medium-duty Double-housing Type Planer.Instruction Manual with Parts as Sectional Drawings.

ML101A LIBERTY (Axelson-Liberty) Medium-duty Double-housing Type Planer.Instruction Manual with Parts as Sectional Drawings.

ML101B LIBERTY (Axelson-Liberty) Double-housing Open-side Convertible Planers.Instruction Manual.

ML102 LIBERTY LATHE (a direct copy of the Colchester Student 1800) for theLiberty the manual for the Colchester version is correct. Operation andMaintenance with a Parts Manual as exploded Component drawings.

ML103 LIDKOPING Centreless GrindingMachines. Detailed Operator's Instruction Manual for all Models.

ML103A LIDKOPING NO. 2 Centreless Grinding Machine all Types. Operator'sInstruction and Maintenance Manual; includes large electrical schematic.

ML103A LIDKOPING NO. 2C Centreless Grinding Machine. Operator's Instruction andMaintenance Manual.

ML103B LIDKOPING NO. 2C Centreless Grinding Machine. Set of 14 very large plusseveral small Electrical Schematics as used by a Lidkoping Service Engineer.

ML103C LIDKOPING Turret Lathe Type CR-4. Operator's Instruction and MaintenanceManual. English and German text.

ML103D LIDKOPING 3B Grinder. 5 Large Electrical Schematics. Original maker's copies.

"LIDKOPING-LARSSON" - See LARSSON above.

ML105 LIECHTI Lathes (Switzerland ). "Description and WorkingInstructions" with detailed Sectional Drawings of the"Universal" Lathes Type P Centre lathe, Type PR Turret Lathe, TypePRT Drum-turret Lathe. Includes a Sales and Specification Catalogue for theCombination Turret Lathe Type PR

ML107 LIEBHERR L401 Gear Hobber: Spare Parts as Large Sectional Drawings.

ML107A LIEBHERR S650 Gear Hobber: Parts Manual as general Sectional Drawings.

ML107B LIEBHERR S500 and S800 Gear Hobber: Detailed Operating Manual with tables ofgears and differential change gears (includes a copy of the detailed salescatalogue for the similar L301).

ML107A LIEBHERR S650 Gear Hobber: Parts Manual as general Sectional Drawings.

ML108 LIGHGUARDS Data Pack: three publications consisting of: "LightguardsInstallation & Maintenance Instructions"; "Lightguards Manual forInfra Red Lightguards (with a section on faultfinding for the Mk.3" and aSet of Electrical Schematics labelled for Pearson, Bronx, BMF and variousunidentified press brakes.

ML109 LIH CHANG Turret Milling Machine Operator's Instruction Manual andExploded-diagrams Parts Manual.

ML110 LINATROL HL-90 (Westinghouse) Co-ordinate Drive Tracing System. ServiceManual with electrical schematic.

ML111 LINCOLN (GKN) "Lincomig" Welding Sets CVR-330, CVR-440,CVR-55-, CVR-660, AM-21, AM-42, AM-213, AM-423, MB-25, MB-36KD, MG-36, MB-40KDand RB-61. Instruction Manual, Electrical Schematics and Illustrated PartsManual.

ML11A LINCOLN (GKN) Archmaker Sprite 2000F Wire-feed unit. Instruction Manualwith Parts as Exploded-component drawings and Electrical Schematics. Includesthe instruction manual for the FCR200, FCR.200A,FCR.300VC and FCR.400VCRectifier Power Units.

ML11B LINCOLN (GKN) FCR200, FCR.200A,FCR.300VC and FCR.400VC Rectifier PowerUnits. Instruction Manual.

ML11C LINCOLN (GKN Norweld) TIG-182 Welding Rectifier . User's manual with an Electrical Schematic.

ML112 LINDNER Type FS-1 THREAD GRINDING MACHINE: Operator's Instruction Manualwith foundation plans, lubrication, countershaft drawings, Electrical diagrams,a number of useful sectional and outline and drawings of the Micro-opticalDevice, Universal Dressing Device, Full-profile Dressing Device, DressingDevice of Special Type, Dressing Device for multiple profile grinding wheels,Work Headstock, Arrangement of change gears and indexing device for axialshifting of the work carriage, grinding wheel chart, Tailstock and workcarriage.

ML114A LINDNER SJD 12 Automatic Internal Grinding Machine Model. Operating andMaintenance Manual with electrical and mechanical schematics.

ML114B LINDNER "Standard Type" Thread Grinding Machines. Operating andMaintenance Manual with a Parts Manual as Sectional Drawings.

L370 LINLEY JIG BORER (USA) Early Model (narrow saddle) Sales Catalog 4 pages.Model 1A Sales Catalog 6 pages + Illustrated Parts List plus Parts Prices.There was also a development of the Linley made in England by the companyDownham: see manual reference http://www.store.lathes.co.uk/print/ME218

ML120 LINMATIC Filing Machine: Operator's Instruction Manual. Slender butuseful publication.

ML121 LNS Super Hydrobar Type HYS Bar Feeder. Instruction & MaintenanceManual in English, French and German.

ML121A LNS Super-Hydrobar Model HS (Hydraulic bar-feed Machine). Operator'sInstruction and Maintenance Manual with parts as sectional drawings. English,French and German text.

ML121B LNS Hydrobar Hydraulic bar-feed Machine. Operator's Instruction andMaintenance Manual with electrical schematic. English, French and German text.

ML121Z LOOPCO LD3M Conveying & Stacking System. Operation & MaintenanceManual.

ML122 LODGE and SHIPLEY PowerturnLathes. Operator's Instruction and Maintenance Manual. Includes comprehensivescrewcutting charts and inch/metric and metric/inch conversion tables.

ML122AX LODGE and SHIPLEY Powerturn Lathes. Parts Manual as useful and very clear ExplodedComponent Drawings.

ML122A Lodge and Shipley Operator's Instruction Manual for 12", 14"and 16" Engine Lathes. Includes a detailed 20-page technical Sales and Specificationbrochure.

ML122B LODGE and SHIPLEY Repair Parts Manual. Geared and belt-dive headstockmodels. 12 pages

ML122C LODGE and SHIPLEY DUOMATIC Lathe. Repair Parts Manual as componentphotographs. 10 pages.

ML122D LODGE and SHIPLEY 60 Model T Lathe. Repair Parts Manual as usefulexploded component drawings.

ML122E LODGE and SHIPLEY T-15977 Electric Lathe Drive by the Reliance Electricand Engineering Co. Operation Manual with Electrical Schematics.

ML125A Logan Lathes. Early Instruction and Maintenance Manual book for theLogan and Montgomery-Ward badged lathes with slender bed feet.

ML125H LOGAN Lathes Models 1937 and 1947 Parts Manual as Exploded ComponentDiagrams.

ML125J LOGAN Lathes Models 1925, 1927, 1955 and 1957 Parts Manual as ExplodedComponent Diagrams.

ML125B LOGAN Lathes 1900 Series: Parts Manual as Exploded Component Diagrams.(any lathe with a model number starting 1900).

ML125C LOGAN Lathes 200, 201, 210 and 211: Comprehensive Instruction Manual.Includes a Parts Manual as useful Exploded Component Diagrams and SectionalDrawings and a detailed Sales and Specification Catalog.

ML125D LOGAN (USA) Lathes and Accessories: Not a Manual but a very useful early(1943) Catalogue s - superb full-plate pictures and detailed Sectional Drawingsof all components.

ML125E LOGAN Lathes 6500 series (6565, 6510, 6560, etc.) 14-inch: Parts Manualas Exploded Component Diagrams.

ML125G LOGAN Lathes Models 925, 927, 995, 957. Parts Manual as ExplodedComponent Diagrams.

ML125K LOGAN: Shaper. 8-inch model. Operation Instructions and Parts Manual asexploded Component Diagrams.

ML180 LOEWE FW4 Milling Machine. Operator's Instruction Manual with ElectricalSchematic and Rotary Table Instructions and Charts. German text.

ML180A LOEWE FS4 Program Milling Machine. Operator's Instruction Manual.English Text.

ML180B LOEWE FS5 Program milling Machine. Operator's Instruction Manual.English Text.

ML210 LOH TR 4-700 Sawing Machine. Instruction and Maintenance Manual.

ML230 LORCH LAS Lathe: Instruction Manual, Illustrated Parts Manual andSectional Drawings. Includes a set of Sales and Specification sheets for theLAS and similar versions - LL-K, LL-V, LL-S, LL-PV, PLL-V, PLL-S, etc

ML230A LORCH B30 LZS and B30LZ Lathes: Lorch B30 LZS and B30LZ Lathes: Operator's Instruction and Maintenance Manual with English text. Includes copies of the essential screwcutting and power-feed charts, explanations of how to generate thread pitches not on the charts, specifications of the bearings used in the lathe and a copy of the maker's detailed and well-illustrated Technical Sales and Specification catalogue.

ML230B LORCH KD50 lathe. Data pack consisting of a German-language manual withuseful sectional drawings of headstock and compound slide, wiring diagram, testcharts, etc. Three catalogues, one in English, two in German giving thecomplete specification.

LORCH: Unfortunately there appear to have been no "Manuals" producedby the company for their range of older flat-belt drive Precision plain-turningand screwcutting lathes, nor for their watchmakers' lathes. However, a largeselection of interesting and well-produced technical advertising literature isavailable on the CataloguesPages

ML300 LORENZ Gear Shaper Model Soo-SVoo. Operating Instructions. Includes anelectrical schematic and a foundation plan.

ML320 LUCA LBC/60 and LBC120 Battery Charger and Engine Starter. . Operating|Instructions with wiring diagrams.

LUMSDEN Manuals often covered more than one model type - with the thosecombined in one volume changing over the year - with others dedicated to aspecific model. If your table size is different to those stated e.g. 43"instead of 38", the same Manual is applicable.

ML340 LUMSDEN Type 70 with reciprocating rectangular table. Operator'sHandbook. Includes a copy of the maker's Sales & Specification Catalogue.

ML340-71 LUMSDEN Type 71MLOD Vertical Spindle Reciprocating Table SurfaceGrinder. Installation, Operation and Maintenance Manual. Includes a Hydraulicschematic, sectional drawings of the Hydraulic system and a number of otheruseful sectional drawings of the mechanical parts.

ML340A LUMSDEN Type 90 Vertical Segmental Wheel Surface Grinding Machines withreciprocating table (including Models: 90LE, 90ML, 91ML, 91MLT, 92 ML and93ML): Operator's Instruction & Maintenance Manual. (see below for anedition with a large electrical schematic).

ML340B LUMSDEN Type 90ML, 91ML, 90LE, 91LE and 92LE Vertical AutomaticContinuous Production Surface Grinder (rotary table fixed vertical wheel head).Operator's Instruction & Maintenance Manual and Spares Parts Manual asSectional Drawings (two manuals, 1st and 2nd Editions for the 90ML and 91MLcombined and a separate Operatots handbook for theLE Series machines).

ML340B2 LUMSDEN Type 90MLN and 91MLN) Automatic Continuous Production SurfaceGrinding Machines (rotary table, fixed vertical wheel head). Operation,Maintenance and Parts Manual as Sectional Drawings.

ML340C LUMSDEN Type 91MLS Automatic Continuous Production Surface GrindingMachine (rotary table, fixed vertical wheel head). Operator's Instruction &Maintenance Manual and Spares Parts as Sectional Drawings.

ML340D LUMSDEN Type 91MLT Vertical Grinder. Operator's Instruction &Maintenance Manual and Spares Parts Manual as Sectional Drawings.

ML340F LUMSDEN Type 92ML & 93ML VerticalGrinder. Operator's Instruction & Maintenance Manual and pares Parts Manualas Sectional Drawings.

ML340G LUMSDEN Type 96ML Vertical Segmental-wheel Grinder. Operator'sInstruction & Maintenance Manual with 2 large Electrical Schematics and someuseful and detailed Sectional drawings.

ML380 LUNA SP800 and SP1000 Wood-turning Lathes. Instruction Manual and PartsAs Exploded Component Drawings.

ML380a Luna W69, W64, W59, W49,L39, L38-310, L38, L28, L18 Circular Saw, SawGuard Frame and Sliding Table, Planer Table and Fittings, Planer Cutter, Fence,Thicknessing Table, Gearbox, Spindle Moulder, Moulding Fence, Drilling Tableetc. Parts Manual as very useful Exploded Component Diagrams.

ML400 LUND UK "PRECIMAX" Cylindrical Grinding Machines: Operator'sGeneral Handbook. Issued by the factory as a guide to using all their models of cylindrical Grinder. (see also "Landis-Lund")

ML400A LUND (Landis-LUND "Precimax") Model FB-1 Fine Boring machine.Instruction and Maintenance Manual. (see also "Lund" for otherPrecimax machines)

ML400B LUND "PRECIMAX" FB-1, FB-1/3, FB-2 and FB-2/3 Fine BoringMachines: Instruction and Maintenance Manual. (see also"Landis-Lund")

ML400C LUND "PRECIMAX" MPA and MPB Grinding Machines: Operator'sInstruction and Maintenance Manual with Parts Manual as Sectional Drawings. (see also "Landis-Lund" for later edition for the MPB Version)

ML400D LUND "PRECIMAX" MPO Cylindrical Grinding Machines: Operator'sInstruction and Maintenance Manual with Parts Manual as Sectional Drawings. (see also "Landis-Lund")

ML400E LUND "PRECIMAX" HUP-1 Cylindrical Grinding Machines:Operator's Instruction and Maintenance Manual with Parts Manual as SectionalDrawings. (see also "Landis-Lund")

ML400F LUND (Landis-LUND) Model MPH, MPJ-12, MPH-10 (and other models ofsimilar type but varying capacity) "Precimax" Plain CylindricalGrinding Machines: Operator's Instruction and Maintenance Manual with PartsManual as Sectional Drawings.

ML400G LUND (Landis-LUND) Model MPB Grinding Machine: Operator's Instructionand Maintenance Manual with Parts Manual as Sectional Drawings.

ML400H LUND (Landis-LUND) Model HMPB Grinding Machine: Operator's Instructionand Maintenance Manual with Parts Manual as Sectional Drawings.

ML400J LUND (Landis-LUND) Model UPH and UPJ Grinding Machines: Operator's Instructionand Maintenance Manual with Parts Manual as Sectional Drawings.

ML400JUK LUND (Landis-LUND) Model UK Grinding Machine: Operator's Instructionand Maintenance Manual with Parts Manual as Sectional Drawings.

ML400K LUND (Landis Lund) Model MPO Plain Cylindrical Grinder. Instruction Bookwith Parts as Sectional Drawings.

ML400L LUND (Landis Lund) Wheel Profile Dressing Attachment - Instructions forSetting and Operating. This assembly was used on the Models MPL, MPM, MPH, MPJ,MPB and MPA

ML400M LUND (Landis Lund) Tymcizer Automatic Sizing Equipment (automaticallycontrols the "spark-out" time, that is, between end of the weelheadinfeed and resetting of the wheelhead to the start position. Operator'sInstructions.

ML400N LUND (Landis Lund and Landis Lund Division of Litton UK) Type 3L CNC CAM 800 Series Grinding Machine. Huge Operator's Manual withMajor Components Adjustment and Preventitive Maintenance and a number of useful sectional and annotated drawings.

ML400P LUND (Landis Lund) Type 5SE Journal Grinder. Large Operator's Manual with Major Component Adjustment,Preventive and Maintenance Schedules and Fault Finding.

ML400Q LUND (Landis Lund) Type 3SE Journal Grinder. Large Operator's Manual with Major Component Adjustment,Preventive and Maintenance Schedules and Fault Finding.

ML450 LUNN KEYSEATING MACHINE Model 15 and LD15. Operating Manual andElectrical Schematic.

ML475 LUREM Universal Woodworker C210B. Operator's Instruction and MaintenanceManual with Parts as Exploded Component Drawings and Electrical Schematics.Editions in English and French included.

ML475A LUREM Universal Woodworker C2100. Operator's Instruction and MaintenanceManual with Parts as Exploded Component Drawings and Electrical Schematics.

ML500 LUX-2M, LUX-2H, LUX-3 Milling Machines. Operator's Instruction andMaintenance Manual.

ML600 LVD Hydraulic Press Brake Type PPNMZ. Operating Instructions withHydraulic Schematics.

ML600A LVD Electrical diagrams for the MVM Guillotine - includes a layoutdiagram.

MM20 MAAG SS-30, SS-30-X and HSS-30 Gear Grinders. Operator's InstructionManual.

MM20A MAAG PH-60 Gear Testing Machine. Operator's Instruction Manual withElectrical Schematics. Late edition - fully revised.

MM20B MAAG SH-100 and SH-100/140 Gear Cutting Machines. Detailed Operator'sInstruction Manual.

MM20C MAAG SH-45 and SH-75C Gear Cutting Machines. Detailed Operator'sInstruction Manual.

MM20D MAAG HSS-60-BC Gear Grinding Machine. Operator's Instruction Manual.

MM20DS MAAG HSS-60-BC Gear Grinding Machine. Supplementary Manual with machinetechnical data, general gear formulas, instructions for crowning devices,examples of calculations, charts of pressure angles and lots of usefuladditional information about gear grinding on the HSS-60.

MM20E MAAG SH-45, SH-75 and SH-100 Gear Cutting machines. Operator'sInstructions. Includes full instructions for the mounting, setting up andoperating the Internal Gear and Rack Cutting Attachment Type JV (Theseinstructions also apply, in general terms, to the Internal Attachment TypeHJV).

MM20F MAAG Gear Book. Calculation & Manufacture of Gears, Gear Drives for Designers & Works Engineers.Comprehensive coverage of: Gear Geometry & Load capacity, Gear Drives, Gear Cutting, Gear Grinding, Inspection of Gears,Gear Materials & Methods of Heat Treatment, Dictionary of Gear Terms, Comprehensive Charts for such as base tangent calculations, etc.576 pages enlarged from A5 to A4. .

MM30 MACHINEX 5 Hand book and Operator's Instruction Manual for all Machinexlathes, Drills and Mills. Includes Exploded Component Parts Manual and a copyof the original Sales and Specification Catalog with lists of all theaccessories.

MM40 "MACHINOEXPORT" - see under "BULGARIA"

MM45 MADAN Junior Air-Hydropump. Operator's Instruction and Maintenance Manual

MM45A MADAN Gas Booster Pump. Operator's Instruction and Maintenance Manual.

MM120 MAESTRO and MAXI and MIDI Variable-speed Drives 1kW, 2kW, 5kW. UsersGuide.

MM47 MAGDEBURG D30 Production lathe. Operation & Maintenance Manual withelectrical diagram

MM50 MAGERLE Milling Machine FD-10-R: Electrical Manual.

MM50B MAGERLE FD-10, FD-12, FD15 Grinding Machines. Comprehensive Operating,Maintenance and Repair Manual with Hydraulic and Electrical Schematics andSpares as Sectional Drawings.

MM50C Magerle Surface Grinding Machines F, FP and FPA Series Grinders: F-7, F-10 , F-12, , FP-10, FP-12, FP-15, FPA-10, FPA-12, FPA-15, etc . A complete 371-page data pack with several Individual Operator's Instruction Books. Includes use of the Accessories - wet-grinding, dust extraction, electro-magnetic clamping, vertical in-feed, transverse measuring device, tips, defects, regulation and re-adjustment of truing apparatus. Also includes a copy of the maker's detailed and well-illustrated 14-page Sales, Technical Specification & Accessories Catalogue.

MM50D MAGERLE FD-120-R,F-100 and F-100-R-S1, Surface Grinder. Electrical Manualincluding Schematics.

MM50E MAGERLE MFP-125.35 Horizontal Surface Grinder Electrical Manual consisting of 127 large Electrical Schematics.including Schematics.

MM58 MAGANAFLUX Models ZA.37W, ZA.37E and ZA.37S Zyglo Flourescent PenetrantSystem Operating Manual. Includes copies of the maker's Sales and TechnicalSpecification catalogues.

MM65 MAGNETEK GPD 503 Technical and Installation Manual.

MM73 MAGNONI (Carlo Magnoni) = see under Arno above

MM85SK Maho SK250 Universal Toolroom Milling Machine. Operator's Instructionand Maintenance Manual with Employment of Accessories Instructions. Availablewith English or German text.

MM85 "MAHO" MH400 Universal Toolroom Milling Machine. Operator'sInstruction and Maintenance Manual with Electrical Schematics and Employment ofAccessories Instructions.

MM85A "Maho" MH500 Universal Toolroom Milling Machine. Operator'sInstruction and Maintenance Manual with Parts as Sectional Drawings andElectrical Schematics. Employment of Accessories Instructions and a copy of themaker's Sales and Specification and Accessories Catalogue.

MM85B "MAHO" "Maho" MH600 and MH700 - Toolroom MillingMachine - also covers the almost identical MH700 with its larger table, longertravels and slightly more powerful motors but otherwise same specification.Operator's Instruction and Maintenance Manual with Electrical Schematics,Employment of Accessories Instructions and a copy of the maker's Sales andSpecification and Accessories Catalogue.

MM85C "MAHO" MH800 Universal Toolroom Milling Machine and Die Sinker(earlier rounded style). Operator's Instruction and Maintenance Manual withParts Manual as Sectional Drawings, Electrical Schematics, Employment ofAccessories Instructions and a copy of the maker's Sales and Specification andAccessories Catalogue.

MM85D "MAHO" MH800, MH900 and MH1000 Universal Toolroom MillingMachine and Die Sinker (later square style) - also useful for the smaller butvery similar late-type 600 model. Operator's Instruction and Maintenance Manualwith Parts Manual as Sectional Drawings, Electrical Schematics, Employment ofAccessories Instructions and a copy of the maker's comprehensive Sales,Specification and Accessories Catalogue.

MM85E Maho CNC 432 Path Control Operating Instructions.

MM85F Maho (specific) Heidenhain TNC 135 Path Control Operating Instructions(used for example on the 400P). Detailed 292-page publication.

MM85G Maho MH500P and MH600P Milling Machine. Detailed Operating InstructionManual

MM95 MAHR 890 Gear Testing Machine. Operator's Instruction Manual.

MAJESTIC Lathes - see under TAKISAWA

MM105 MAKINO MC86 Machining Centre FANUC 11M System. Operator's InstructionManual including drawings.

MM105A MAKINO MC40 Machining Centre Parts Manual as sectional drawings (this issupplied as colour scans)

MM110 MALCUS MC Type Centreless Grinders. Operating and Maintenance Manual.

MM115 MALMEDIE EPMK-10 Single Blow Ball Press. Operating Manual and Parts asSectional Drawings with an Electrical Schematics.

MANCHESTER RAPIDOR Hacksaws - See under RAPIDOR

M118 Mandelli Prince 500U CNC Machining Centre. Large Mechanical and ElectricalManual (no circuit diangrams)

MM120 MANEX No.2 JIG BORER: Instruction Book with Electrical Schematics andParts as Sectional Drawings.

MM128 MANN 4102 Horizontal Milling Machine. Operating Instructions with a sectional drawing of the spindle and a wiring Diagram.

MM130 MANNAIONI MANN "AU-CYCLE" Threading Lathe 3" and 4".Operator's Instruction and Maintenance Manual with Parts Manual as SectionalDrawings and Electrical Schematics.

MM130A MANNAIONI MANN F.B.1 Thread Milling Machine. Operating and ServicingManual.

MM140 MANNESMAN DEMAG P1000 and P1200 Electric Rope Hoists. Parts as ExplodedComponent Drawings.

M12B ManSon: USA Maker's Sales Folder (4 x A5 pages) plus various sheets &adverts including and English Dealer's Sales Folder. 14 pages. Plus anadditional 24 pages of accurately dimensioned sketches of every part that makesup the lathe - including the contents of the accessory kit - from whichany component could be manufactured. Notes: these are sketches, not engineeringdrawings. 24 pages.
<![if !supportLineBreakNewLine]>
<![endif]>

MM172MANURHIN TR.12/16 and TR.18/22 Automatic lathe. Operator's Instruction Manual. US

MM172A MANURHIN TR.12/16 and TR.18/22 Automatic lathe. Illustrated Parts Manual. US

MM172B MANURHIN COMBIMAT 42-60-80 Single Spindle Lathe. Parts Manual asSectional Drawings.

MM172E MANURHIN COMBIMAT 42-60-80 "Combimat" Automatic Lathe(Manurhin-Tarex) Cam Design Manual with fold-out Charts.

MM172C MANURHIN - detailed "Instructions for the Calculations ofCams".

MM172D MANURHIN "Polygon"Universal & Profile Grinding Machine. A complete Data Pack Consisting of adetailed Operation & Maintenance Manual with Electrical Schematics; aseparate 58-page publication "Working Principles of the Polygon GrindingMachine" (with examples of work possible) and a third 58-page publicationgiving additional technical and performance information.

MARCH Tool and Cutter Grinders -these were re-badged CLARKON machines. See under CLARKSON for details

MARK CENTURY Controls. See under General Electric

MM180 MARLCO Hydraulic Presses - all models. Operating & MaintenanceManual.

MM273/M15 MARLOW Vertical Millers: No manual was produced for these millers butthe following Sales and Specification Catalogues are available: Models Standard1, 2 and 3, 4-DF and 5-DF, TM-10, TM-10A. 7 pages.

MM274 MARPOSS E12 and E12-MPC Programmable Controller. Detailed Operating andProgramming Manual.

MM274A MARPOSS E44 Grinder Control System. Operating and Programming Manual.

MM274B MARPOSS E54 Grinder Control System. Operating and Programming Manual.

MM274F MARPOSS "Alsar" Type AL-SARX-CAO-3 "ElectronicIn-progress Gages": Operator's Instruction Manual, Technical Notes andconnection diagram.

MM274G MARPOSS Finar "Electronic In-progress Gages": Operator'sInstruction Manual, Technical Notes and connection diagram.

MM274H MARPOSS M53 Bench Guage Operating Instructions and Retooling Instructions (two manuals in one).

MM274J MARPOSS E24 Grinder Control System Operating & Programing Instructions.

MM274K MARPOSS E4 Modular Electronic Gauging System. Installation and Operating Instructions with Parts as an Exploded Component Drawings Page.

MM274L MARPOSS Electronic In-process Gages Model Micromar ZF4 Operating Instructions.

MM276 MARSHALL "Watchmakers' Handy Manual 1949" showing a vast rangeof Swiss watch spares "All calibre and part numbers of Swiss Ebauchefactories and Watchmakers of Switzerland Catalogues for identifyingparts". 174 pages.

MM278 MARTONAIR Pneumatic Hoist: Instruction Manual and Parts as SectionalDrawings.

MM282 MARTIN Lathe Model DLZ502, DLZ602 and DLZ702. Operation & MaintenanceManual with Electrical Schematics and a reproduction of the screwcutting andfeeds chart. Includes a copy of the maker's Technical Specification andAccessories Catalogue.

MM282A MARTIN Lathes Models Martin Lathe Models D63, DS63, D71, DS71, D80 andDS81 - the lathes were of identical specification except for their centreheights. Operator's Instruction and Maintenance Manual. Includes a copy of themare's detailed 20-page Sales & Technical Specification Catalogue. DS.Operator's Instruction and Maintenance Manual.

MM282B MARTIN Lathes KM180 and KM200. Operator's Instruction and MaintenanceManual with electrical diagrams. GERMAN TEXT

MM285 MARWIN Max-E-Mill Horizontal, Single-spindle Numerically ControlledProfile Contour Milling and Boring Machine. Installation, Maintenance andComponent Replacement Manual, the maker's Specifications, Sales andSpecification Catalogue and the Plessey Programming Manual for the BR3100 Controller.

MM285A MARWIN Cutting Tools Turbo Grind 200 Grinding Attachment OperatingManual.

MAS - these machine tools were also sold under the TOS brand name (see below)with identical model numbers.

M290 MAS VR2 Radial Arm Drilling Machine: Operator's Instruction andMaintenance Manual with Parts Manual as Sectional Drawings. Includes fourWiring Diagrams.

MM290A MAS MAS VR-4 Radial Drilling Machine: English-language Operator'sInstruction and Maintenance Manual. Includes a Wiring Diagram and a number ofuseful, detailed sectional drawings (but not a complete parts manual)

MM290B MAS VR-5A Radial Drilling Machine with Programme Control: Operator'sInstruction and Maintenance Manual. Includes a Wiring Diagram:

MM290C MAS VRM-50A Universal Radial Drilling Machine: Parts Manual as SectionalDrawings.

MM290D MAS SV18R Lathe: Operating and Maintenance Manual. Includes adetailed 12-page Sales & Specification Catalogue.

MM290E MAS SV18R Lathe. Parts Manual as detailed Sectional Drawings.Contains an Electrical Schematic and clear reproductions of all thescrewcutting charts and one showing the list of spindle speeds and therelationship to cutting speeds.

MM290F MAS Manual of Chucking Tools with dimensions for Automatic Lathes Types A12, A20 and A40.

MM300 MASERATI Index Tables and Table of Leads for Maserati Universal DividingAttachments.

MM395 Massey (B and S Massey) "clear Space" Pneumatic Power Hammers 2cwt to 15 cwt. Several Operating and Maintenance Instructions covering thevarious sizes of machine together with Sectional Drawings showing the names ofparts.

MM395A Massey (B and S Massey) Trimming Press Tiebolt Type with MultiplateClutch. Operating Instructions with a sectional drawing of the machine.

MM402 Mastercam Lathe (version 6) User Guide.

MM403 MASTERLAP lapping machine. Instruction Manual with Parts List.

MM450 MASTRA (Northern Tool & Gear Co.) Gear Tooth Deburring Machine. Single-page Instructions plus a 2-page catalogue.

MM516 MASWEG Double Belt Sander DBSM 11. Operating Instructions. Includes anelectrical schematic.

MM408 Matchmaker TNC151/155 Computercontrol Programming Course Manual.

MM408A Matchmaker Posidata CNC 1800M and 1800D Programming Manual.

MATCHMAKER = see also under "Positdata"

MM408ACMATTERSON (England) No.11 Universal Model Thread Milling Machine. Operating Instructions with an Electrical Schematic.

MM408AC2MATTERSON (England) No.12 Universal Model Thread Milling Machine. Operating Instructions with an Electrical Schematic.

MM408AC3MATTERSON (England) Seies 1N Screw Milling Machine. Operating Instructions with some sectional drawings.

MM408ABMATTISON Machine Works (USA). Parts Manual as Exploded Component Drawing "For all sizes of Mattison High-powered Surface Grinders of the Horizontal Spindle, Reciprocating Table Type".Includes a large Electrical Schematic and a copy of the manual for the General Electric Electronic Timer Type CR7504-A142.

MM408AB2MATTISON Machine Works (USA). Operating Manual "For all sizes of Mattison High-powered Surface Grinders of the Horizontal Spindle, Reciprocating Table Type". Includes comprehensiveinstructions for the "OilGear" Variable-delivery pumps Typea D, DC, DS, CG, abd D with sectional drawings and the "Four-way" reversing Plunger pumps for reciprocating drives". Includes a copy of the maker's all-models' Sales & Techical Specification and Accessories Catalog.

MM408Z Mattsson & Zetterlund VF-600 Vertikal fräsmaskin. Grundläggande instruktioner, delar som sektionsritningar och en kopia av tillverkarens försäljnings- och tekniska specifikationskatalog. SVENSK TEXT.

MM498Z Mattsson & Zetterlund VF-600 Vertical Milling Machine. Basic instructions, Parts as Sectional Drawings and a copy of the maker's Sales and Technical Specification Catalogue. SWEDISH TEXT.

M409 MATRA Modell S10 Drehbank Betriebs- und Wartungsanleitung. Enthält Reproduktionen der Threading-Diagramme. Matra D10 Lathe. Operation and Maintenance Manual with reproductions of the screwcutting charts.

M410 MATRIX CLUTCHES. Whilst not a manual this comprehensive Sales andSpecification catalogue contains detailed (and dimensioned) Sectional Drawings,application examples and instructions on fitting, adjustment, dismantling andMaintenance.

MM500 MATRIX (Coventry Gauge and Tool Company) "Thread Grinding" -Its History and Development.

MM500A MATRIX (Coventry Gauge and Tool Company) "Thread Grinding". Highlydetailed publication titled: "Operator's Machine Hand book". Explainsevery detail of the process.

MM510A MATRIX (Coventry Gauge and Tool Company) Measurement of ThreadedComponents. An unusually detailed Catalogue with explanations of how to use thevarious thread checking machines made by the company.

MM510B MATRIX (Coventry Gauge and Tool Company) No. 1A Cylindrical Grindingmachine: Operator's Instruction and Lubrication Manual with electricalschematic. .

MM510C MATRIX (Coventry Gauge and Tool Company) No. 1A Cylindrical Grindingmachine: Parts Manual as Sectional Drawings. Includes a detailed Sales andSpecification Catalogue with annotated diagrams, electrical circuits, afoundation plan, lubrication diagram and clear descriptions of the machine'sconstruction functions.

MM510D MATRIX (Coventry Gauge and Tool Company) No.2 Cylindrical GrindingMachine. Detailed Operator's Instruction and Maintenance Manual.

MM510E MATRIX (Coventry Gauge and Tool Company) No.2 Cylindrical GrindingMachine. Parts Manual.

MM510F MATRIX (Coventry Gauge and Tool Company) No.10 Thread Grinding machine.Operation Instructions.

MM510G MATRIX (Coventry Gauge and Tool Company) No. 16 Universal Tap and ThreadGrinding Machine. Operator's Instruction and Maintenance Manual.

MM510H MATRIX (Coventry Gauge and Tool Company) No. 33 Thread Grinding Machine.Detailed Operator's Instruction and Maintenance Manual with Parts as SectionalDrawings.

MM510J MATRIX (Coventry Gauge and Tool Company) Model 37 Automatic IndexingWorm Grinding Machine (Coventry Gauge and Tool Company). Detailed OperatingManual and Maintenance Guide.

MM510K MATRIX (Coventry Gauge and Tool Company) No. 37 and No. 47 Type 3 TaperThread Grinding Machines. Operator's Instruction and Maintenance Manual withDismantling Instructions.

MM510KP MATRIX (Coventry Gauge and Tool Company) No. 37 (Types 1, 2, 3 and 4) Plain Thread Grinders. Parts Manual as Sectional drawings.

MM510L MATRIX (Coventry Gauge and Tool Company) No. 37 and No. 47 Type 2Plunge-cut Thread Grinding Machines. Service and Maintenance Manual with Parts as Sectional Drawings and Dismantling Instructions.

MM510L2 MATRIX (Coventry Gauge and Tool Company) No. 36 and No. 46 UniversalThread Grinding Machines. Operator's Instructions.

MM510M MATRIX (Coventry Gauge and Tool Company) T.I.21 (No. 66) Small Diameter Internal Thread Grinding Machine. InstructionBook.

MM510N MATRIX (Coventry Gauge and Tool Company) Universal Single-Ribbed WheelGenerating Machine. Operating Instructions.

MM510P MATRIX (Coventry Gauge and Tool Company) 55 and TT-712 Tap GrindingMachine. Detailed Service Manual with Parts as Sectional Drawings

MM510Q MATRIX (Coventry Gauge and Tool Company) No. 61 Gear Grinding Machine.Operating Instructions.

MC510R Matrix (Coventry Gauge and Tool Company) DG100 Drill Point GrindingMachine. Operator's Instruction Manual with Parts Manual as Sectional Drawings.

MC510S Matrix (Coventry Gauge and Tool Company) Type B and BB Surface GrindingMachines (sometimes badged Thompson-Matrix). Operator's Instruction Manual withMaintenance & Trouble-shooting Guides, lubrication and hydraulic charts anddetailed technical descriptions of the machines.

MM510A Matrix (Coventry Gauge and Tool Company)Floating Carriage Diameter Measuring Machines (High-precision Checking of the diameters of threaded components)Combined Catalog and Operating Instructions.

MC510GP Matrix (Coventry Gauge and Tool Company) Type GP900 Roll Grinder. Operator's Manual.

MM510T MATRIX CHURCHILL 4/15 CNC Lathe. Operator's Instruction and MaintenanceManual. US

MR531 MATRIX-ROCKWELL 25-ton Dieing Press Air-clutch Model. ReplacementParts list as Sectional and Exploded component drawings.

MM510V MATRIX / Kand UX Optical projectors. The Care and Use of InstructionBook.

MM515 MATSUURA MAM72S40 Vertical Machining Centre: Comprehensive Operation,Programming, Maintenance & Installation Manual.

MAXIGRIND Spiral Milling Machine:see below under WARD Maxigrind

MM518 Max Arc M.I.G. (Co.2) Welder. Operating & Maintenance Instructions.

MM520 MAXI MAESTRO Inverter. Instruction Manual.

MM530 MAXIMAT lathes and milling machines, etc. - see under "EMCO"

MM140 MAZAK - see under the makers YAMAZAKI.

MM145 M.B.M. "Gibas" Model TAS 6 Trimming Machine. Operator'sInstruction Manual with Electrical Schematics and Sectional Drawings.

MM150 MC Machines NC350 and MC3500 Tube benders: Instruction Manual and Sparesas Exploded Component Drawings.

MM152 McIlvanie B-40 Lathe. Operation, Maintenance and Parts Manual.

MM158 MAYPRESS MKN 1-30/5Single-sided Toggle Lever Press. Operating and Maintenance Instructions.

MM158 MAYPRESS MKN 1-63/6 Single-sided Toggle Lever Press. Operating andMaintenance Instructions.

MM160 MAXARC (MAX-ARC or MAX ARC) M.I.C. - M.A.G. Welder. Instruction manual

MM170 McILVANIE LATHE Model B-40. Operator's Instruction Manual, MaintenanceManual and Spares as Photographed Parts.

MM170A McILVANIE CENTURY LATHE Model B Standard and Toolroom Lathe: MachineWorks Manual of Instruction and Illustrated Parts Manual.

MM170B McILVANIE CENTURY LATHES - MODEL S. Instructions for Installation,Maintenance and Operator's Instruction with a Parts Manual as PhotographicPlates.

MM173 McMaster Power Hacksaw. Parts Lists as Exploded Component Drawingstogether with a simple Instruction and Service Sheet.

MM175/ME350Y McMillan ML-18 Lathe (copy of Emco Compact 8). The best manual forthis lathe is the full one for the Compact 8, complete with Spares Manual asExploded Component Drawings.

MM180A MEBA and "Mebamat" 250, 250A (Automatic type) and 320 HorizontalBand Saws. Operating and Maintenance Manual with some sectional drawings. Thisis a Data Pack consisting of all publications found for the machines from earlyto late.

MM180B MEBA Models SR Band saws (SR500, SR600, SR700, SR800 and SR900). Operatingand Maintenance Manual and Parts Manual as Exploded Component Drawings.

MEBA - Also: see under STARTRITE for Modelswith the same model designation

MM182 MECA (Mecatecnica) TR1 Turret Drilling and Tapping Machine. Instruction and MaintenanceManual with Parts as Sectional Drawings.

MM182A MECA (Mecatecnica) Rotary Indexing Tables P1, PD and PS. Operation & ServiceInstructions with Indexing Charts and Parts as Sectional Drawings. (4 pages)

MM184/MB376 MECA-LUX - this was a BOXFORD 250, 280, 280TR, ST10.20, 10.20,11.20, 11.30, 330, 280TR badged as the Mecha-Lux. Instruction and MaintenanceManual and Exploded components Parts Manual. Includes copies of severaldetailed advertising catalogues that give the full specification of the variousmodels and show all the accessories.

Mechanical Plopeni = see under M.I.C.M. (Romania)

MM190 MECOF 25PR Radial-arm Drill Mode. Operator's Instruction, MaintenanceManual with Parts Manual as detailed Sectional Drawings. Includes an electricalschematic.

MM190 MECOF 25PR Radial-arm Drill Mode. Operator's Instruction, MaintenanceManual with Parts Manual as detailed Sectional Drawings. Includes an electricalschematic.

MM190A MECOF 40C Radial-arm Drill Mode. Operator's Instruction, MaintenanceManual with Parts Manual as detailed Sectional Drawings. Includes an electricalschematic.

MM200 MECHANICY PONAR-KOMO (also badged Giewont) Vertical Miller FYC-26 .Operator's Instruction and Maintenance Manual and Parts Manual as SectionalDrawings.

MM200A MECHANICY PONAR-KOMO Universal Milling Machines (also badged Giewont)FWA-32M and FWA-41M and Vertical Milling Machines FYA-32M and FYA-41M. ServiceManual and Spare Parts Manual with Electrical Diagrams.

MM200B MECHANICY PONAR-KOMO (also badged Giewont) Milling Machines FWA-32M,FWA-39M and FWA-41M UNIVERSAL: Catalogue of Interchangeable Parts. Drawings.

MM200AA MECHANICY PONAR-KOMO Milling Machines (also badged Giewont)FYA-31, FYA-32 & FYA-41. Operation and Service Manual.

MM200D MECHANICY PONAR-KOMO (also badged Giewont) Milling Machines FWA32M,FWA41M, FYA32M and FYA41M: Operator's Instruction and Maintenance Manual andParts Manual as Sectional Drawings.

MM200E MECHANICY PONAR-KOMO (also badged Giewont) Milling Machines FXJ40 andFYJ40: Operator's Instruction and Maintenance Manual and Parts Manual asfold-out Sectional Drawings.

MM200F MECHANICY PONAR-KOMO (also badged Giewont) Milling Machines FXJ40 andFYJ40: Electrical Operation and Maintenance Manual with fold out Schematics.

MM200G MECHANICY PONAR-KOMO (also badged Giewont) Gear Box 2-4 Fu. ServiceManual and "Leads Charts".

MM200H MECHANICY PONAR-KOMO (also badged Giewont) Head Power Feed Box 2-3 FYs.Service Manual.

MM200J MECHANICY (ZAKLADY PRZEMYSLOWE *) Milling Machine FXE40: Operator'sInstruction and Maintenance Manual with large fold-out Electrical Schematics.

MEDDINGS - if your Meddings drill is nor listed below please phone: 01298871633 and one may be available

MM205 MECOF Radial Arm Drill Model 40C. Basic Instruction and Erection withElectrical Schematic and Parts as Sectional Drawings (as issued with newmachines).

MM205 MECOF Radial Arm Drill Model 60C. Basic Instruction and Erection withElectrical Schematic and Parts as Sectional Drawings (as issued with newmachines).

MM210 MEDDINGS 1 and 1S Drilling Machines bench and floor standing: Operatingand Maintenance Manual and Illustrated Spares.

MM210A MEDDINGS L1 (Mk.4) and L2 (Mk.2) Drilling Machines: Spares as ExplodedComponent Drawings.

MM210B MEDDINGS 2G and 2GS Drills: Bench and floor standing with reductiongearing in head: Operating and Maintenance Manual and Illustrated Spares.

MM210L MEDDINGS LB1 and LF1 Bench and Floor Type Drills (usually marked LB orLF followed by a digit): Spares Parts as Exploded Component Drawings -including the Morticing Attachment (this is the only publication issued forthis model).

MM210C MEDDINGS MB2 and MF2 Drills in Mk. 1 and Mk. 2 Form (with reductiongearing in head): Illustrated Spares as Exploded Component Diagrams. Includes acopy of the maker's Technical Specification & Sales Catalogue.

MM210D Meddings MB4, MF4,MF4/RC, MF4/FS, MF5, MB5, MF5, MFS/FS MB4 and MF4 Mk.2Drills - "rounded" and "rectangular" head models, allversions. Operation, Maintenance & Parts Manual. Several editions that coverall versions of these popular and well-made drills with internal head reductiongearing.

MM210E MEDDINGS MB10 Mk.2 Precision Drilling machine. Brief Operating &Maintenance Instructions and Spare Parts List as Sectional Drawings. Includestwo editions of the maker's Sales & Specification Sheets.

MM210EE MEDDINGS MF9 Standard, MF9 Mk.2 and MF9/T Mk.2 Combined drilling andTapping Model. Working Instructions, Maintenance, Electrical Diagrams and Partsas Exploded Component Drawings.

MM210F MEDDINGS A8 and A10 Articulated Throat Drilling Machines: this was builtin two versions, Mk.1 and Mk. 2. The base and table remained the same but thehead changed from the early “rounded” type to one with a more “angular"appearance – these heads also being used on the LB1, LF1, MB2, MBF and“Mk.4" drills. A data pack with all printed information issued for theMk.1 and Mk.2 Models covering Operation, basic Maintenance and Illustrated Spares Listings as usefulExploded Component Drawings. Includes copies of the various maker's detailedand well-illustrated Sales & Technical Specification Catalogues.

MM210G MEDDINGS CS-30/3, S-30, S-68, S-25, SB-68 and SB-25 Drills: Operator'sInstruction and Maintenance Manual and Parts as Photographed Components.

MM210J MEDDINGS S-68 Drill: Parts Manual as Photographic Components.

MM210K MEDDINGS "Drilltru" 15" Bench and Floor Type Drills:Operating and Maintenance Manual and Spares as Exploded Component Drawings.

MM210M MEDDINGS Drilling and Tapping Machines: T4 Mk.V1, TB4-TF4 and RC-TA8 anddrills with the T4 Head. Operator's Instruction and Maintenance Manual withParts as Exploded Component Drawings and electrical schematic.

MM210 Meddings "Pacera" F14 Drill A model with belt drive and built-inslow-speed reduction gearing. Operating and Maintenance Instructions withSectional Drawings and Spares as Exploded Component Drawings.Two editions areincluded, early and late together with the maker's Sales, Specification andAccessories Catalogue.

MM210P MEDDINGS "Pacera" M4 (7/8" 10-speed) Drill: Operating andMaintenance Manual and Spares as Exploded Component Drawings.

MM210Q MEDDINGS Air-hydraulic Power Feed Units and PACERA Unit Heads.Operator's Instructions and Parts Manual as Exploded Component Drawings.Drawings.

MM215 MEGA Bandsaw Type BS400SA Instruction Manual & Parts Manual asExploded Component Drawings.

MM215A MEGA Semi-Automatic Bandsaw Type BS1830 Instruction Manual and PartsManual as Exploded Component Drawings.

MM217 Meiden (Meidensha Corporation) AC Speed Control Equipment Thyfrec-VT210S Instruction Manual.

MM220 MENTOR (Control Techniques) 1 Microprocessor DC Drives. DetailedInstruction Manual with electrical Specification, Connection diagrams, Carddescriptions, Descriptions of parameters, Fault Finding & Repair &Maintenance,

MM220A MENTOR (Control Techniques) Maxi Mystro Instruction Manual.

MC390 CONTROL TECHNIQUES FXM5 FieldController for DC Motors. Users' Guide.

MM225 MENZIKEN (Switzerland )Vertical lathe Type LA-750. Operator's Instruction Manual and Service Instructions.Includes separate publications for "Setting Up", a Description of theFunctioning of the Electrical System. Includes a number of large ElectricalSchematics

MM225A MENZIKEN Lathe Type 200Lathe. Operating Instructions with details of how to set the (important) frontbearing clearance and adjust the spindle and power-feed clutches.

MM227 MERCER Air-Gauging Equipment.Not a manual but a Detailed Sales and Specification Catalogue that gives fulldetails of how the system works and the various models. Includes details ofrecorders, Comparators, Microprobes, Air plug Gauges, Gap gauges and Air rings,Mechanical Probes, callipers, stand s, etc. US

MM227A Mercer 155 Electronic/Pneumatic Gauging. Setting and Instruction Manual.

MM229 MERCIER 1124B, 1224B, 1236b and 1340B lathes. Operator's Instruction andMaintenance Manual with a Parts Manual as Exploded Component Drawings. U

MM230 Meritus (Barnet) 10KVA to 100KVA Spot Welders: A pack of 4 manuals withOperating and Servicing details, electrical diagrams and some sectionaldrawings.

MM235 MERLI CLOVER 15/21 Lathe. Operator's Instruction and Maintenancehandbook. A poor copy.

MM240 MESSER GRIESHEIM "QUICKY" Portable Flame Cutting Machine:Detailed Operating Manual and illustrated Parts Manual.

MM240B MESSER GRIESHEIM STATOSEC "K Junior" Universal Flame CuttingMachine: Detailed Operating Manual.

MM240C MESSER GRIESHEIM STATOSEC Model W Universal Flame Cutting Machine:Detailed Operating Manual.

"METALEXPORT" Poland - see Jafo Jarocin

MM242 METALMASTER 9-inch Lathe with early "multi-belt" countershaftassembly and no backgear. This lathe was also sold as the "Atlas"9-inch and "Craftsman Lathes" clickhere for pictures Rare, very early Instruction Manual and simple,Illustrated Parts Manual. Includes a copy of a rare, early Catalogue. Thislathe may be marked with the following model numbers: 936, 942, 948, 954, 1042,1042A, 1042B, 1042C.

MM243 Metalprogres Univerzalnom Glodalicom Tip UG-P. Uputstvo Zarukovanje. Croatian Text.

MM244 METBA MB-3 Universal Milling Machine Operation and Maintenance Manualwith use of accessories including tilting and non-tilting tables, dividinghead, indexing head, indexing reference tables, multi-directional milling head,high-speed milling attachment, an electrical schematic and a copy of themaker's detailed Sales and Technical Specification Catalogue. MM244A Metba MB-0 Universal Milling Machine. Operation Manual with Electrical Schematics. SPANISH TEXT.Not a very good copy. but readable.

MM245 METCO Metalizing Hand book (Spraying molten metal to form a surfacecoating). Detailed 232-page book describing the Wire Process method.

Meteor lathes - see under Flexispeed.

MM250 METEOR Twist-Drill Grinding machine ME14 with tap-grinding jig GBA (byMegomat, Germany). Operating Instructions. Covers Twist Drills, Point Thinning,Tap Grinding, etc. Includes and electrical schematic.

MM250A METEOR KBS-6 Drill Grinding Operation Manual.

MM250B METEOR MM-10 Drill Grinding Manual - a very detailed publication with anelectrical schematic.

METOR bandsaws - also branded as STARTRITE & METROA

MM260 METORA UMB-220 and UMB-220S Band saw with Automatic Operator'sInstruction. Operator's Instruction and Maintenance Manual and Parts Manual asSectional Drawings.

MM260A METORA VMB-250 Band saw with Automatic Operator's Instruction.Operator's Instruction and Maintenance Manual and Parts Manual as SectionalDrawings. Includes a Hydraulic Schematic.

MM260B METORA UMB-250 Band saw with Automatic Operator's Instruction.Operator's Instruction and Maintenance Manual and Parts Manual as SectionalDrawings.

MM260C METORA HMB 400+STA Band saw with Automatic Operator's Instruction andMaintenance Manual and Parts Manual as Sectional Drawings.

MM261 Metosa-Pinacho "Torrent" Timemaster 71.68 Lathe Basic OperationManual with Parts as Sectional Drawings and an Electrical Schematic. Not aperfect reproduction - but readable with clear drawings. .

MM261A Metosa-Pinacho Lathe Type L1-180 Lathe. OperationManual with a Parts Manual as Sectional Drawings and an Electrical Schematic. English, German, French and Spanish Text. .

MM261B Pinacho 190 Lathe by VOLSTAD. Operation Manual with Parts Manual as sectional drawings. Includes anelectrical schematic and reproductions of the screwcutting and feed charts.

MM261C Pinacho L11-260 Lathe (Type Torrent?). Operation Manual with Parts Manual as sectional drawings. Includes anelectrical schematic.

MM262 Metropolitan-Vickers "Care and Maintenance of DC Motors andGenerators". Comprehensive 40-page publication covering not only everyaspect of larger motors but drive belts and special considerations such as thespecial conditions required for storing roller-bearing motors.

Meuser literature appears to have been built up from standard sheets assembledinto a manual to suit a particular lathe as dispatched from the works. A set ofdata has been assembled that users of the MOL, M1L, M2L, M3L, MOO, MOL etc havefound to be of help:

MM264 MEUSER Lathe MOL, M1L, M2L, M3L MOO, MOL (230 x 750) Model 37475Operation and Maintenance Manual with Parts as Sectional Drawings and enelectrical schematic.

MM264A MEUSER Lathe M3 Operation and Maintenance Manual with Parts as Sectional Drawings and enelectrical schematic.

MM268 MEYER EB4004 ELTROBALANCE Dynamic Balancing Unit and balancing HeadsTypes 2000/4000. Operator's Instruction Manuals. Includes an electrical drawingshowing the Alarm, Start-circuit, Stop-circuit, System Error and Option RPMcontrol settings; basic dismantling instructions for the Balancing Heads and abrief Trouble-shooting Guide.

MM268A MEYER EB5004 ELTROBALANCE Dynamic Balancing Unit. Operator's InstructionManual.

MM268B MEYER MANOBALANCE Dynamic Balancing Unit. Operator's Instruction Manual.English text - also available in French.

MM274 MEYER and BERGER UW1 Multi-purpose machine Tool (sometimes badged AstobaUW1). Operator's Instruction and Maintenance Manual together with a copy of themaker's Technical Specification and Accessories Catalogues. English or GermanText. (machine type as shown here: Meyer and Burger

MM275Michigan Roto-Flo (Roto Flow) Cold-forming Machine Types 3225, 3237 and 3251. Operation Manual

MM276 M.I.C.M. (Uzina Mecanica Plopeni - Romania) G-6 Precision Bench DrillOperator's Instruction and Maintenance Manual with Electrical Schematic.

MM278 MICON Numericon 850 CNC System. Operator's Instruction and ReferenceManual

MM279 Micro Lathe (maker unknown - headstock label says "MicroLathe") Operating Instructions with Parts as Exploded Component Drawingsand an electrical schematic.

MM280 MICROCUT 837 Milling Machine. Instruction Manual and Parts Manual asSectional Drawings (also marketed as the SEIKI and BUFFALO Model G/V-2000 and837 ).

MM280A MICROCUT Turret Milling Machine (Bridgeport Clone) also marketed underthe Buffalo Brand. Instruction Manual and Parts Manual as Sectional Drawings

MM280B MICROCUT 5000VS Vertical Turret Milling Machine (also sold as theBuffalo and Milltech).Instruction Manual and Parts Manual as Sectional Drawings

MICROFINISH MACHINES - See THIELENHAUS Section (Ernst Thielenhaus Wuppertal)

MM295 MICRON DRILL SHARPENING MACHINE Model 108 Operator's Instruction Manual.

For other MICRON Drill-sharpening machines see under "Dormer" for thesame Models

MM295A MICRON LATHE - Bosch Alpha 2 Programming Manual.

MM297 Microrex Centreless Grinding Machine No.1. Operation Instructions with anElectrical Schematic and a copy of the maker's detailed Sales and TechnicalSpecification Catalogue.

MM298 Microspot CNC Controller - Operation and service Instructions.

MM300 MIDGLEY and SUTCLIFF HB3 Radial Arm Drill. Spare Parts Manual as usefulExploded Component Drawings.

MR182A MIDGLEY and SUTCLIFF (branded RICHMOND) SR2 Radial Arm Drilling Machine(also badged as a Midgely & Sutcliffe). Operator's Instruction andMaintenance Manual with Parts Manual as Exploded Component Drawings and WiringSchematic.

MIDGLEY and SUTCLIFF made machine tools branded "Richmond" - seeunder RICHMOND below

MR235 Midlands Machine Tool Co (MMT)Operation & Maintenance Manual with Electrical Schematics and a Manual for the PCBC Clutch-Brake Unit.

MM310 MIDSAW Alpha, Beta and Delta Manual Bandsaws. Instruction Manual andParts Listing.

MM310A MIDSAW Minor, Minor Super, Minor Deepthroat, DT-36 Series, Standard(canting), Standard (Rigid), Deep-throat Models. Instruction and MaintenanceManual.

MM311 MIEDSA 243H Copy Grinding machine. Operating Instructions.

MM312AA MIGATRONIC Mig/Mag Welding Machines 100 Mono, 140 Mono, 120 Compact, 160Compact, 250 Compact, 300 Compact, 300, 320 and 350. Instruction & Maintenance Manual withElectrical Schematics and Exploded Component Parts Lists.

MD315 MIGBLU 300, 300W, 400 and 400W Welding Machines. Operator's InstructionManual and Parts Manual with Electrical Schematics. English, French, German,Spanish and Italian text.

MIKRON - traditional precision lathes and plain milling machines: no operator'smanuals were issues for these models but we can supply several detailed andinteresting sales catalogues:

M65 MIKRON Lathe and Milling Machine Catalogue. The largest and most completeMikron publication that shows in greater detail and clarity than any other allthe various combinations of toolroom lathes and milling machines of thetraditional pattern. Catalogue is dated 1951 and numbered No. 50b. 84 Pages.

M65A MIKRON T90 Precision Bench Lathe Sales and Technical Specification andAccessories Catalogue 28 pages.

M65B MIKRON Range Catalogue dated 1935 showing Precision Bench Centre Lathes,Bench Capstan Lathes and Bench Milling Machines and Accessories as made fromthe early 1930s until the 1940s. 68 Pages.

M65C MIKRON Range Catalogue dated 1935 showing Gear Cutting Machines, ThreadMilling Machines and Sharpening Machines and Accessories as made from the early1930s until the 1950s. 36 Pages.

MM999 MIKRON Automatic Sharpening Machine Type 121. Operator's InstructionManual with adjustment instructions.

MIKRON - later machines and gear cutters: We have access to many MIKRON GearManuals. If what you need is not listed below please phone to enquire:01298-871633 or email: :tony@lathes.co.uk

MMWF2 MIKRON WF2 Vertical Milling Machine (also applicable to thenear-identical but larger WF3). Operation and Maintenance Manual. Includes acopy of the maker's sales, Specification and Accessories catalogue.

MMWF23DP MIKRON WF 2/3 DP Universal Milling Machine. Detailed Operation andMaintainance Manual with Dismantling Instructions and Use of SpecialAccessories.

MMWF23DPA MIKRON WF 2/3 DP and WF 3 DP Universal Milling Machine. ProgrammingInstructions for Heidenhain TNC121 Controller.

MM3R MIKRON 3R (GOULDER-MIKRON) Gear Tester. Operator's (detailed) Manual withspecial supplements on the theory and practice of gear testing methods. Alsoincludes a detailed Sales & Technical Specification Catalogue covering anumber of Goulder-Mikron gear testers.

MMA21/0 MIKRON Type A 21/0 Gear Hobber. Operator's Manual with Repair andMaintenance Instructions and Electrical Schematics Set.

MMA21/2 MIKRON Type A 21/2 Gear Hobber with Electro-Hydraulic Control.Operator's Manual with Repair and Maintenance Instructions and ElectricalSchematics Set.

MMA22/2 MIKRON Type A 22/2 Fully Automatic Gear Hobber with Electro-HydraulicControl. Operator's Manual with Repair and Maintenance Instructions.

MMA22/3 MIKRON Type A 22/3 Gear Hobber with Fully Automatic Electro-HydraulicControl. Operator's Manual with Setting Up, Installation, Operation andMaintenance Instructions.

MMA24/0 MIKRON Type A 24/0 Gear Hobber. Operator's Manual with Repair andMaintenance Instructions.

MM79 MIKRON Type 79 Gear Hobbing Machine. Operating Instructions

MM79P MIKRON Type 79 Gear Hobbing Machine. Parts Manual as Photographic Pictures.

MM102 Mikron Gear Hobber Data Set for the Types 102, 102.01, 102.03 and 102.04. All known data that includes two manuals to cover the changes between the models. Operator's Instruction and Maintenance Manual with an electrical schematic. Includes a copy of the Maker's 102 Sales and Specification Catalogue and a second catalogue showing all the gear-hobbing machines current from the 1950s to 1970s (Types 21, A21A22, A24, A60/0, 61/0, A62, 79, 102, 102MPS, 106, 120, 121, 122, 132, 134 plus hobs and the n/0r and N1R rolling gear testers). 218 pages

MM119 MIKRON Type 119 Automatic Gear Hobber. Comprehensive Operator's Manualwith Maintenance Instructions.

MM120 MIKRON Type 120 Gear Hobber. Comprehensive Operator's Manual with Maintenance Instructions.

MM132 MIKRON Type 132 Gear Hobber. Operator's Manual.

MM133 MIKRON Type 132-02 Gear Hobber. Operator's Manual.

MM320 MIKRON Booklet giving "Cutters and Calculations" - including various graphs - for Bevel Gears.

MM320A MIKRON WF52D Universal Milling Machine (Heidenhain TNC 407/415 Control)Operating Instructions.

MM320B MIKRON WF52D and WF72D Universal Milling Machines (Heidenhain TNC407/415 Control) Electro Documentation with Circuit Diagrams.

MM320C MIKRON WF41C Universal Milling and Boring Machine Operator's ManualMechanical Part

MM320D MIKRON WF41C Universal Milling and Boring Machine Electro Documentation(Heidenhain TNC 155 Control)

MM320E MIKRON WF31SA Universal Gear Hobbing Machine Operator's Manual MechanicalPart

MM320F MIKRON WF31SA Universal Gear Hobbing Machine Electro Documentation(Heidenhain TNC 114B Control) with Circuit Diagrams

MM320G MIKRON WF32C, WF52C and WF72C Universal Milling and Boring Machines (TNC407 and TNC 415 Control) Detailed Service Manual

MM320H MIKRON WF32C Universal Milling machine with Heidenhain TNC 425 ControlElectro Documentation with Circuit Diagrams.

MM320J MIKRON WF32C Universal Milling Machine (Heidenhain TNC 425 Control)Operating Instructions

MM320K MIKRON WF32C Universal Milling Machine (Heidenhain TNC 425 Control)Electra Documentation with Circuit Diagrams

MM320L MIKRON WF32D Universal Milling Machine (Heidenhain TNC 407 and 415Control) Operating Instructions

MM320M MIKRON WF32D Universal Milling Machine (Heidenhain TNC 407 and 415Control) Electra Documentation with Circuit Diagrams

MM320N MIKRON WF21D Universal Milling Machine Operator's Manual MechanicalEdition

MM320P MIKRON WF21D Universal Milling Machine (Heidenhain TNC 355 Control)Electra Documentation with Circuit Diagrams

MM320Q MIKRON WF21D Universal Milling Machine (Heidenhain TNC 407 and 415Control) Electra Documentation with Circuit Diagrams

MM320R MIKRON WF52C Universal Milling Machine Operating Instructions for modelwith Heidenhain TNC 407 and 415 Control

MM320S MIKRON WF52C Universal Milling Machine Operating Instructions for modelwith Heidenhain TNC 425 Control

MM320T MIKRON WF52C Universal Milling Machine (Heidenhain TNC 407 and 415Control) Electra Documentation with Circuit Diagrams

MM320U MIKRON WF51C Universal Milling Machine (Heidenhain TNC 150 Control)Electra Documentation with Circuit Diagrams

MM320V MIKRON WF51C Universal Milling Machine (Heidenhain TNC 155 Control)Electra Documentation with Circuit Diagrams

MM320W MIKRON WF51D Universal Milling Machine from Series 36 onwards(Heidenhain TNC 407 and 415 Control) Electra Documentation with CircuitDiagrams

MM320X MIKRON WF51D Universal Milling Machine from Series 21 onwards(Heidenhain TNC 355 Control) Electra Documentation with Circuit Diagrams

MM320Y MIKRON WF31CH Universal Milling Machine Operator's Manual MechanicalPart

MM320Z MIKRON WF31CH Universal Milling Machine (TNC 155 Control) Two ElectraDocumentation Manuals (152.38.80.821 and 152.39.80.820 with Circuit Diagrams

MM321 MIKRON WF31D Universal Milling Machine Operator's Manual Mechanical Part

MM321A MIKRON WF31D Universal Milling Machine (TNC355 Control) Electra Documentationwith Circuit Diagrams

MM321B MIKRON WF54CH and WF74CH Service Manual

MM321C MIKRON WF61C Universal Milling Machine Operator's Manual Mechanical Part

MM321D MIKRON WF61C Universal Milling Machine (TNC355 Control) Electra Documentationwith Circuit Diagrams

MM321E MIKRON WF61C Universal Milling Machine (TNC155 Control) ElectraDocumentation with Circuit Diagrams

MM321F MIKRON WF31C Universal Milling Machine Operator's Manual Mechanical Part

MM321G MIKRON WF31C Universal Milling Machine Electra Documentation withCircuit Diagrams

MM321H MIKRON WF-C Universal Milling Machine (TNC 151 and TNC 155 control)Operator's Manual Electrical Part

MM321J MIKRON WF-C Universal Milling Machine (TNC 150Q control) Operator'sManual Electrical Part

MM321K MIKRON WF-C and WF-D Universal Milling Machine (TNC 355 control)Operator's Manual Electrical Part

MM321L MIKRON WF3SA Universal Milling Machine Electro Documentation

MM321M MIKRON WF3SA Universal Milling Machine Operator's Manual Mechanical Part

MM321N MIKRON WF-CH Universal Milling Machine (TNC 155 Control) Operator'smanual Electrical Part

MM321P MIKRON WF2SA Universal Milling Machine Operator's Manual Mechanical Part

MM321Q MIKRON WF3DCM Universal Milling Machine (TNC150 control) ElecroDocumentation with Electrical Diagrams

MM321R MIKRON WF3DCM Universal Milling Machine (TNC155 control) ElecroDocumentation with Electrical Diagrams

MM321S MIKRON WF3DCM Universal Milling Machine Operator's Manual MechanicalPart

MM321T MIKRON WF3DPM Universal Milling Machine Operator's Manual

MM321U MIKRON Universal Milling Machine UME710 and UME900 with Heidenhain TNC407 (415B) Controls. Operation and Maintenance Manual

MM321V MIKRON Universal Milling Machine UME600, UME710 and UME900 withHeidenhain TNC 410 Controls. Operating and Maintenance Manual

MM321W MIKRON Universal Machining Centre VHC750 with Heidenhain TNC 407 andTNC415 Controls. Operating and Maintenance Manual

MM321W2 MIKRON Universal Machining Centre VHC750 Electro Documentation (withcircuit diagrams) for machines with Heidenhain TNC 415 Controls

MM321X Mikron Universal Milling Machine UMS710 and UMS900. Operation andMaintenance manual for machines with Heidenhain TNC 426 Controls

MM321XV MIKRON Tool Changer TCP10 Operator's Manual Mechanical and ElectricalManual.

MM321XW MIKRON Automatic Tool Changer TCP 12 Operating Instructions (Mechanicaland Electrical Parts) including: Preparation, Description, Maintenance,Electrical Sections. Includes a sub booklet containing instructions on: SpindlePositioning Drive, Basic Setting, Height Setting, Swivel Drive, Tool ChainPositioning, Chain Tensioning, Replacement of Tool Pockets (recesses) andmachine parameters.

MM321XX MIKRON Tool Changer TCD18. Two detailed manuals one labelled"Operating Instructions" the other "Operating Instructions validfor Universal Milling and Boring Machines Types: WF51D, WF71D, WF32C, WF52C,WF72C with Control System Heidenhain TNC 407/415 or Bosch CC200/300Mikron"

MM321XX2 MIKRON Tool Changer TCD 22 Operating Instructions valid for Heidenhain TNC 407, TNC415B and TNC425

MM321XY MIKRON Tool Changer TCD22V Operating Instructions Valid for UniversalMilling and Boring Machines UM600, UM710 and UM900 with Heidenhain TNC 410 andTNC 426 Controls

MM321XZ MIKRON Tool Changer TCD44V and TCD44VH. Two Manuals - one the OperatingInstructions Valid for Universal Milling and Boring Machines with HeidenhainTNC 426 Controls and the other labelled "Adjustment" that includesCommissioning, Mechanical Adjustments, Spindle Orientation, Gripper JawChanges, Replacing the Toothed Belt, Horizontal-Vertical Switch Over, DriveMotor and Maltesian Wheel and Hydraulics.

MM322 MIKRON VC500, VC750, VC1000 (VC-500, VC-750, VC-1000) Vertical MachiningCentres SERVICE MANUAL.

MM322EE MIKRON VC750, VC1000 (VC-750, VC-1000) Vertical MachiningCentres Electro Documentation Manual (TNC415)

MM322X MIKRON VC750 and VC1000 TNC 425 Vertical Machining Centres. Operating Instructions.

MM322XY MIKRON NC Rotary Table NCT 600-AC Operator's Manual.

MM322B MIKRON 3R (GOULDER-MIKRON) Gear Tester. Operator's (detailed) Manualwith special supplements on the theory and practice of gear testing methods.Also includes a detailed Sales & Technical Specification Catalogue coveringa number of Goulder-Mikron gear testers.

MM322C MIKRON A22/3 Gear Hobber. Electrical Drawings and Key to Symbols. Two sets included one for early machines and the other for machines Series 16 onwards

MM322B MIKRON CN Dividing Head NCD 160-AC. Operator's Manual

MM322C MIKRON Goulder System 116.02 Instruction Manual

MM325 MILLER MIGBLU 300-400-400w-500w Welder. Instruction Manual and PartsList.

MM325A MILLER S54D Wire-feed Welder (ASCI-MILLER S.p.A. Italy). InstructionManual and Parts List.

MM325B MILLER Dialarc Welders HF & HF-P and CY50 Models (ASCI-MILLER S.p.A. Italy). Operation andMaintenance Manual with Parts as Exploded Component drawings.

MM325C Miller Electric Mfg Co. (ASCI-MILLER S.p.A. Italy) Watermate 1 and Watermate 2. Operation & Maintenance Manual with Repair Parts as Exploded-component Drawings.

MM325D Miller (ASCI-MILLER S.p.A. Italy) Pulstig 300 Welder. Parts Manual as Exploded-component Drawings.

MM327 Millers Falls No. 2140 Jig SawAttachment for Electric Drills. Operating Instructions and Parts as ExplodedComponent Drawings

MM330/MB800 Millrite (Burke/Powermatic) Vertical Turret Miller. IncludesStandard and variable-speed models. Operator's Instruction and MaintenanceManual with Parts as detailed Exploded Component Drawings. Includes ElectricalSchematics.

MM330A/MB800A MILLRITE (Powermatic/Burke) No. 4 Horizontal Miller. MaintenanceManual and Illustrated Parts Manual (Army Edition)

MM335 MILLS (John Mills) Oilaulic Presses. Operator's Manual with Instructionsfor Installation and Maintenance with Full-range Product Catalogue

MM337 MILLTECH 5000VS Vertical Turret Milling Machine (also branded Buffalo andMicrocut). Operator's Instruction Manual.

MM340 MILNES 13-inch Swing Centre lathe: Detailed Operator's Instruction andMaintenance Manual with Sectional Parts Drawings and a copy of the maker's well-illustrated and detailed Sales, Technical Specification and Accessories Catalogue.

MM340A MILNES DF-4 lathe (this is a re-badged Denham Junior Mk.2) . Operationand Maintenance Manual.

MM340B MILNES (Churchill-Milnes) Heavy Duty Fine Boring Machines: Operator'sInstruction Manual.

Early Milnes Lathes: unfortunately no manuals were produced for the earlymodels but some splendid catalogues are available on the catalogues pages. here

MM340C MILNES Vertical Miller. Brief Operator's Guide, Descriptions,Lubrication and Adjustments with two detailed Sales and Technical SpecificationCatalogues containing useful sectional drawings and pictures of components.

MILWAUKEE MILLERS - see under KEARNEY and TRECKER

MM350 MIMIK 3000 Hydraulic Copying (Tracer) Attachment FOR boring mills andV.T.Ls. Installation and Operator's Instruction Manual.

MM350A MIMIK 6000 Hydraulic Copying (Tracer) Attachment. Installation andOperator's Instruction Manual.

MM350B MIMIK Series 8000, 9000 and MIMIKETTE Hydraulic Copying (Tracer)Attachments. Installation and Operator's Instruction Manual (two editions).

MM350C MIMIK Type PTE4.5 Tracer (hydraulic copy) Unit as used on larger lathessuch as the Colchester Mastiff 1400, Mascot 1600, Harrison M500 series, etc.Operating Manual and Parts Manual as Sectional Drawings.

MM350D MIMIK 360-DEGREE TRACER SYSTEM. Hydraulic Coping (Tracer) Installation and Operator's InstructionManual.

MM355 MINGORI Pipe-bending Machine Type OB-30. Operating and Maintenance Manualwith Exploded Components Parts Drawings and Hydraulic Schematic.

MM358MC73 MINI-LATHE 7" x 12" (Chinese lathe as produced and soldunder many badges). Operator's Instruction and Maintenance Manual with Parts asExploded Component Drawings.

MM360 MINILOR TR-1 Lathe and Powered Vertical Milling Head: ComprehensiveOperator's Instruction Manual and Parts Manual as Exploded Component Drawings.Available with English or French text.

MM360A MINILOR TR-20S Lathe. Operation & Maintenance Manual. French textonly.

MM360B MINILOR TR-11 Lathe. Operation, Maintenance and Parts Manual. French textonly.

MM362 MINI MAXI Wood-copy latheModels T90, T100, T120, CT90, CT100 and CT120. Operator's Instruction,Instruction and Maintenance Manual with Parts as Exploded Component Drawings.

MM363 MIPSA Universal Grinding Machines Types U (120 x 400mm and 130 x 750mm)Servicing & Maintenance Instructions including a separate manual for theInternal Grinding Attachment, wiring and installation instructions, the maker'salignment and test certificate and a copy of the Sales & Technical SpecificationCatalogue .

MM364 MISAL 817 Lathe. Operator'sInstructions with Parts Manual as Sectional Drawings including a dimensioneddrawing of the special spindle nose, Electrical Schematic and reproductions ofthe Screwcutting and Feeds Charts.

MM364A MISAL 735 Horizontal Milling Machine. Operator's Instructions with PartsManual as Sectional Drawings and a large Electrical Schematic.

MITSUBISHI - Manuals other than those listed below can also be supplied

MM373 MITSUBISHI MELDAS-EI Numerical Control Unit. Instruction Manual

MM373A MITSUBISHI CNC MELDAS-EI Programming Manual.

MM373B MITSUBISHI MELDAS Drive Amplifier. Maintenance Manual.

MM373C MITSUBISHI MELDAS 530 & 520 MCONTROL Electrical Drawings Manual.

MM373D MITSUBISHI F-Series Programmable Controller. User Guide and ReferenceManual

MM375 MITTS and MERRILL KEYSEATER Sizes 2, 3 and 3A. Instructions forOperator's Instruction and Maintenance Manual. Includes 11 large blue printsnot in the original publication.

MM375A MITTS and MERRILL KEYSEATER Sizes 3A. Instructions for Operator'sInstruction and Maintenance Manual including some Sectional Drawings.

MM375B MITTS and MERRILL SHAPERS. All Model 16-inch to 32-inch Stroke.Operator's Instruction and Maintenance Manual.

MITUTOYO - if NOT LISTED BELOW manuals for most Mitutoyo Products can be provided.Phone: 01298 871633 or e-mail your requirements :mitutoyo@lathes.co.uk

MM380 MITUTOYO AT2-N and AT2-FN Linear Scale Reader. Operator's InstructionManual (see below for installation manual).

MM380A MITUTOYO AT2-N and AT2-FN Linear Scale Reader. Installation Manual

MM380B MITUTOYO FPSU4 Pulse Signal Unit. User's Manual.

MM380C MITUTOYO GM and GM/L-Counter 164 Series. Detailed Operator's InstructionManual.

MM380D MITUTOYO KL Counter (Series 174) for Linear Scale Units. Detailed UsersManual.

MM380E MITUTOYO KS Counter for Linear Scale Units. Detailed Users Manual.

MM380F MITUTOYO PL Series Counter (includes all sub-types such as the PLL32L)Digital Readout (Counter for Linear Scale). Detailed Operator's InstructionManual.

MM380G MITUTOYO PM-L Counter Series 164 for Linear Scale (digital Readout).Detailed Operator's Instruction Manual including Touch Signal Probeinstructions.

MM380H MITUTOYO 543 Digimatic Indicator. Operator's Instruction Manual.

MM380J MITUTOYO QUALIMATE DL-500. Operator's Instruction Manual.

MITUTOYO - all other manuals available to order. Please Enquire: mitutoyo@lathes.co.uk

MM386 MIYANO CNC-6BC Lathe. Instruction and Maintenance Manual together with a166-page "outline of Programming" section.

MM390 MIZOGUCHI Boring Head MU-S. Instruction Manual.

MM398 MMK (Matsumoto) MMK NC Rotary Tables. Operator's Instruction Manual.

MM399 MODERN Universal Oil Grooving Machine (Modern Machine Tools Coventry). Operator's Instructions.

MM400 MODIG RBM 28 & 28B Geared-head drill. Operator's Instruction Manualand Illustrated Parts Manual.

MM400A MODIG (Sweden) UBM-AM Miller. Instruction Manual and Parts Manual asSectional Drawings and Component Pictures. Operator's Instruction Manual andIllustrated Parts Manual.

MM400B MODIG BMS 190 Lathe. Instruction and Maintenance Book and Parts asSectional Drawings. Swedish Text.

MM420 MONARCH 10EE - Operation, Maintemnance and parts Manualsted Parts Listfor the early version with "old height" round selector chart andexposed gear drive to the screwcutting gearbox.

MM420A MONARCH 10EE - Two complete editions of the Operation, Maintenance andParts Manuals for the "new height" lathe with the rectangularselector chart and enclosed gear drive to the screwcutting gearbox. Includes aParts Manual as Exploded Component and Sectional Drawings, electrical diagrams,a copy of the factory Test & Inspection Sheet showing tolerances andoperational function and copy of the late Sales, Techanical Specification andAccessories Catalog.

MM420B MONARCH 10EE. "Blueprints" of the rectangular selector platemachine on 40 sheets; scan onto CD-ROM.

MM420C Monarch 13-inch Model EE Precision Tool Room Lathe. Basic OperatingManual (6 pages)

MM420D Monarch 13-inch Model EE Precision Tool Room Lathe. Operator'sInstruction Manual and Illustrated Parts Manual (61 pages)

MM420E Monarch Lubrication Manual for Engine and Toolmaker's lathes includingEE Series 60 and Heavy Duty Models M, N and NN (15 pages).

MM420F Monarch 610 models 2516 and 2013. Operator's Instruction Manual andParts Manual as Exploded-component Drawings. Includes a copy of the maker'sSales and Specification and Technical Specification Catalogue.

MM420G Monarch 610 models 1610, 2013 and 2516 Detailed Exploded-view PartsManual.

MM420H Monarch Merit Lathe. Operator's Instruction Manual.

MM420J Monarch MONOMATIC: Operator's Instruction Manual and Illustrated PartsManual. Includes factory blueprints of the wiring and switching system.

MM420K Monarch K Series Lathe. Operation Manual and Illustrated Parts Manual assectional drawings and photographs.

MM420L Monarch Series 60 lathes. Operator's Instruction Manual with PartsManual as Component Photographs and Lubrication Manual.

MM420L Monarch Series 62 lathes. Operator's Manual together with a copy of theMonarch Air-Gage Tracer Type B Manual and a Guide to the Lubrication ofMonarch Lathes

MM420N Monarch Models NN, M and N Operation Manual and Illustrated PartsManual.

MM420P Monarch Model C Toolroom Lathe. Operator's Instruction and MaintenanceManual with Electrical Schematic. Includes a superb 33-page Sales, Accessoriesand Technical Specification Catalogue.

MM420S MONARCH CNC-250 and CNC305 Lathe. Detailed Maintenance Manual withPhillips 3482/PC20 PCI Ladder charts and Parts Manual as Sectional Drawings. 0

MM420Z MONARCH CATALOGUE circa 1919 - not a Manual (there were non for theearly lathes) but precise technical details are given of a huge range ofMonarch lathes and accessories of the type built between 1909 and approximately1927. If you have an early Monarch lathe, this appears to be the only dataavailable. 87 pages.

MM440 MONDIALE CELTIC 12 Lathe - older style with rounded styling. Operator'sInstruction Manual - in Dutch or German only. Includes Electrical Schematics.

MM440A MONDIALE CELTIC 12 Lathe - older style with rounded styling. Spare Partsas very useful and clear Detailed Sectional Drawings. Includes copies of thescrewcutting and speed charts and electrical diagrams.

MM440N MONDIALE CELTIC 12N Lathe - newer type with angular styling. Operator'sInstruction Manual and Parts Manual as Sectional Drawings. Includesreproductions of the lathe's screwcutting, power feeds and spindle-speedcharts. English text.

MM440B Mondiale Celtic 14 Lathe (newer, more angular style model). Operationand Maintenance Manual with Parts Manual as clear Sectional Drawings. Availablewith English or French Text.

MM440BD MONDIALE CELTIC 14 Lathe (old, rounder style). Operator's InstructionManual DUTCH text. Includes Electrical Schematic and a sectional drawingthrough the headstock and spindle and a dimensioned drawing of the spindle'sthreaded nose.

MM440C MONDIALE CELTIC 17 and Celtic 20 Lathes - older model with roundedstyling (the 20 is a 17 with a raised centre height). Operator's Manual withParts Manual as Sectional Drawings. Includes high-resolution copies of theoften worn screwcutting charts and lever markings. Also included is whatappears to be a simple "switch" wiring diagram (though not a completewiring schematic) and copy of the maker's detailed Sales and SpecificationCatalogue.

MM440CN MONDIALE CELTIC 17N and Celtic 20N Lathes - newer model with angularstyling (the 20 is a 17 with a raised centre height). Operator's Manual withParts Manual as Sectional Drawings and copy of the maker's detailed Sales andSpecification Catalogue that contains reproductions of the screwcutting, powerfeeds and spindle-speed charts.

MM440D MONDIALE GALLIC 14 and Gallic 350 Lathes (the "14" is namegiven to the model with a 14-inch swing, the 350 is the metric name for thesame 350mm swing lathes) Late model with angular styling: Operator'sInstruction and Maintenance Manual with Parts Manual as detailed SectionalDrawings. Includes an electrical schematic. Available with English or FrenchText.

MM440E MONDIALE GALLIC 16 and Gallic 400 Lathes (the "16" is namegiven to the model with a 14-inch swing, the 400 is the metric name for thesame 400mm swing lathes)- later models with angular styling. Operator'sInstruction Manual and Parts Manual as Sectional Drawings. Includes reproductionsof the frequently damaged screwcutting and speed charts and an electricaldiagram.

MM440G MONDIALE CG16 and DG16 Lathe. Operator's Instruction and MaintenanceManual (17 sheets).

MM440H MONDIALE GALLICOP Copy (and Conventional) Lathe. ComprehensiveMaintenance Manual with Parts Manual as Sectional Drawings with ElectricalSchematics.

MM440J MONDIALE GALLIMAT Lathe. Operator's Instruction Manual.

MM440K MONDIALE RE Lathe. Operation & Maintenance Manual. GERMAN TEXT ONLY.

MM440L MONDIALE L-1 Lathe. Operation & Maintenance Manual. English Text.

MM440M MONDIALE VIKING Milling machine. Operation and Maintenance Manual.

MONFORTS - See under GERBER (Ernst Gerber)

MM442 MONNIER and ZAHNER SF139 Gear Milling Machine. Electrical Schematics.

MM446 MONOPRECIS Type 114R Surface grinder. Operation & Maintenance manualFRENCH TEXT.

MM448 MOODY lathe - Canada. The best Manual for the Moody is the one producedin England for that other South Bend clone by Boxford. Unlike the South Bendbook "How to Run a Lathe" this 137-page edition concentrates indetail on the 9-inch lathe, not the whole range, and thus contains much moreinformation about how to operate it as well as many screwcutting charts, listsof changewheels set-ups as machines left the factory, metric conversions andother valuable data. A few mechanical details are different but the operatingprocedures are identical. Also included is a copy of the original South BendParts Manual - most items being identical to those used on the Moody.
MM450 MOOG Hydra-Point 3 axis N/C Milling Machine. (Based on the Bridgeport)182 page Detailed Maintenance Manual and Exploded Parts' Diagrams (Covers onlythe Moog items, not the Bridgeport mechanicals).

MM450A MOOG Hydra-Point Model 83-1000 MC 3-axis N/C Milling Machine Centre.Operator's Instruction and Maintenance Manual with 9 full-sized ElectricalSchematics and Parts as Sectional Drawings.

MM450B MOOG Hydra-Point Super 10 3-axis N/C Milling Machine Centre. Operator'sInstruction and Maintenance Manual with Parts as Exploded-component drawings.

MM450C MOOG Models 1000S and 1000S-TP Hydra-Point NC Controlled Milling andDrilling Machines. Programming Instructions.

MM454 MOON Corrugating Machine. Set of 5 Sectional Drawings.

MM455 Moore No. 1 Jig Borer - the first version made. This had open V-belt drive over 5-step pulleys; to the top rear of the main column a 4-spoke capstan handwheel and to the right-hand side of the elevating head, a 4-spoke full-cycle handwheel. Operator's Instruction and Maintenance Manual with Parts as Photographic Plates.

MM455A MOORE No. 3 Jig Borer. Operator's Instruction and Maintenance Manualwith Parts Manual as Detailed Sectional Drawings.

MM455B MOORE 11/2 and 3 Universal Measuring Machine. Operator's Instruction andMaintenance Manual with Parts as Detailed Sectional Drawings.

MM456 MOORE No. 2 JIG GRINDER. Operator's Instruction and Maintenance Manual withParts Manual as Sectional Drawings.

MM456A MOORE No. 2C JIG GRINDER. Operator's Instruction and Maintenance Manualwith Parts Manual as Detailed Sectional Drawings.

MM456B MOORE No. 3 Jig Grinder. Operator's Instruction and Maintenance Manualwith Parts Manual as Sectional Drawings. Includes a Wiring Diagram.

MM456C MOORE G18 No.3 JIG GRINDER. Operator's Instruction and MaintenanceManual.

MM456D MOORE G18 NO.3 JIG GRINDER. Electrical Manual.

MM456E MOORE JIG BORING and JIG GRINDING ACCESSORIES "The Most CompleteLine of Jig Boring and Jig Grinding Accessories in Existence". AComprehensive, well-illustrated 135-page catalogue showing all the fittings andaccessories made by the company.

MM456F MOORE air-driven Slot Grinding Attachment. Operation and MaintenanceManual.

MMC58 MOORE-CATMUR 0.7 h.p. Air-Driven Slot Grinding Attachment - for all MooreJig Grinders. Operator's Instruction and Maintenance manual.

MM466 Morando Type PA25 Lathe. Operation and Maintenance Manual with a numberof mechanical sectional drawings (spindle, Clutch unit, slide rest) and anelectrical schematic.

MM4557 MORAT B9 Gear Hobbing Machine: Operator's Instruction Manual. (poor-quality copy)

MM4557B MORAT B11 Gear Hobbing Machine: Operator's Instruction Manual.

MM460 Moore & Wright Precision Tools: Illustrated and clearly written DataSheets showing the detailed Construction and "How-to-use-correctly"instructions for Micrometers external, internal, depth and telescoping;Universal Bevel Protractors, bevel and Setting Protracors, Combination Squares;Engineers' Steel Try Squares; Adjustable Try Square; Universal Surface Gauges;V Blocks and Clamps and Calipers and Dividers. This is all the data needed forthe great majority of laying out and measuring in toolmaking and generalengineering.

MM462 MOPCO Universal Grinding Machine Types RCF75 and RCF125. Operation Manual with Parts Manual as Sectional Drawings.

MM465 MORFAX "Linerider" Operating & Maintenance manual.

MM475 MORGAN Guillotines. Power and Treadle types. A compendium of all knownliterature. Operator's Instruction Manual and Parts Manual as SectionalDrawings.

MM475C MORGAN RUSHWORTH A.S.T.S. Treadle Guillotine. Operating Manual.

MM475D MORGAN RUSHWORTH BBP (Imported) Folding Machine (possibly brand ed"Reliant". Operating Manual.

MM475E MORGAN RUSHWORTH Straight Folding Machines (Possibly brand ed"Reliant"). Installation and Operating Instructions. 4 pages.

MM475F MORGAN RUSHWORTH Box and Pan Brake Model BP48/16 (Possibly brand ed"Reliant"). Installation and Operating Instructions. 2 pages.

MM475G MORGAN RUSHWORTH Box and Pan Brake Model BP550/16. Installation andOperating Instructions. 2 pages.

MM475H MORGAN RUSHWORTH Bending Rolls Model PIP 2500/6 (also applies to otherPIP Models) Operation and Service Instructions. Includes an ElectricalSchematic.

MM475J MORGAN RUSHWORTH Guillotines Types DDPG 1000, DDPG 1500, DDPG 2000 and DDPG 2500 Operation and Service Instructions. Includes an Electrical.

MM489 MORI SEIKI MR Type Lathe. Comprehensive Operator's Instruction Manual.

MM489A MORI SEIKI MS Type Lathe. Comprehensive Operator's Instruction Manual.

MM490A MORI SEIKI SL-1-4 and TL-3.5 Fanuc 10T-A(MFNC-L3), 10T-F LadderDiagrams.

MM490B MORI SEIKI MV-Junior (Mori-Fanuc) Comprehensive & Detailed 360-pageOperator's Instruction and Maintenance Manual with Diagram list and FanucCommissioning papers. Includes sections on Specification, Tooling, ManualOperation, Automatic Operation, Machine Moveable Range, Functional Explanation,Inspection, Maintenance and Lubrication, Before Programming, Programming,Installation and Troubleshooting, etc.

MM490C MORI SEIKI SL-1B Nc lathe with FANUC 10T-A 7 11T-A. Operator'sInstruction Manual and Diagram List.

MM490D MORI SEIKI NMV5000 DCG and NMV8000 DCG Pallet Changer InstructionManual.

MM490DM MORI SEIKI NMV8000 DCG CNCMachining Centre Detailed Maintenance Manual

MM490E MORI SEIKI NMV8000 DCG Pallet Changer: Maintenance Manual.

MM490F MORI SEIKI NMV8000 DCG/40 and NMV8000 DCG/50 Pallet Changer: PartsManual as Exploded Component and Sectional Drawings.

MM490G MORI SEIKI SL-15/20 ( N/C 10TD) Electrical Circuit Diagrams

MM490H MORI SEIKI DL-20 CNC Lathe. Huge and detailed Instruction Manual.Includes a Manual for the Operation Panels DL-20, 20MC and DL-25, 25MC.

MM490J MORI SEIKI DL-20 CNC lathe. Detailed Maintenance Manual. Includes:Machine Specifications, Routine Maintenance, Lubrication, Hydraulics,Pneumatics, Headstock Cooling, Electrical System, Chuck Cylinder, Coolant,Tooling, Operation Panels, Manual Operation, Chuck Edit, Co-ordinate System andContinious Machining, etc. 5

MM490K MORI SEIKI MV-55 Vertical Machining Centre. Maintenance Manual withElectrical Circuit and Hydraluic diagrams.

MM490L MORI SEIKI CL-200 and CL150 Maintenance and Installation Manual.

MM490M MORI SEIKI Programming Manual Fanuc System 5T for Models SL-1, SL-2, SL-3, SL-4, TL-3, TL-5, etc.

MM490N MORI SEIKI SL-3 CNC Lathe. Operation Manual

MM492 MORRIS 400 Series Hoist. Operator's Instruction and Maintenance Manualwith Parts as Exploded Component Drawings.

MM492 MORRIS 164 Travelling Trolleys. Adjustment and Conversion Instructionswith Parts manual as Exploded Component Drawings.

MM451/M150 MOSELEY (USA) No manuals were produced for this lathe a veryinteresting and rare catalog is available: No.11, late 1800s. 103 (small)pages.

MM501 MOSSNER (August Mossner) "Rekord" Band saw SM300, SM400, SM420:Operating Instructions with spares as Sectional and exploded componentDrawings.

MM5001 MOULTON Universal Thread Milling Machine. Operator's WorkingInstructions with Electrical Schematic and a copy of the maker's Sales &Specification Catalogue.

MM502 MSO Type R (all sizes)Cylindrical Grinders. Operator's Instruction and Maintenance Manual with PartsManual as Sectional Drawings.

MM502A MSO Type FH-300 Cylindrical Grinder. Operating Instructions.

MM504 MULHEAD ROTARY AUTOMATIC Mk.5A. Operator's Instruction and MaintenanceManual with useful Sectional Drawings and Electrical Schematic.

MM504A MULHEAD ROTARY AUTOMATIC Mk.6. Operator's Instruction and MaintenanceManual with useful Sectional Drawings and Electrical Schematic.

MM506 MULLER Model MDW 20 N.C. Chucking Auto with Automatic Tool Changing.Operator's Instruction and Maintenance Manual.

MULTICO - other MULTICO Manuals may be available if not listed below:

MM508 MULTICO B400 bandsaw. Operation and Adjustment Instructions.

MM508A MULTICO Universal Woodworker (sometimes badged "FUSSO" or"SHOPSMITH"). Detailed Operator's Instruction Manual with Parts asExploded Component Drawings

MM508B/MHW1 MULTICO GRADUATE (Harrison Graduate and Union) Woodturning andBowl-turning Lathe. Machine Manual with Maintenance, Lubrication, Wiring andExploded-diagram and Sectional-Drawings Parts Manual. Two editions areincluded, early and late, showing both types of spindle design. Includes anORIGINAL Sales and Specification and Accessories Catalogue.

MM508C MULTICO-TEKNY TWL800/1000 Wood-turning lathe. Instruction Manual withParts as Exploded Component Drawings. Includes copies of the Maker's Sales andSpecification Sheets.

MM508D MULTICO-TEKNY 37-inch single-bar bed wood-turning Lathe (sometimesbadged Multico) Instruction Manual with Parts as Exploded Component Drawings.

MM508E MULTICO Model K Morticer. Instruction Manual with Parts as ExplodedComponent Drawings.

MM508F MULTICO Model M Morticing Machine. Instruction Manual with Parts asexploded components. 6 pages.

MM508G MULTICO Model PM10 and PM12 Morticer. Instruction Manual.

MM508H MULTICO SENIOR 12-inch Circular Saw Bench. Instruction Book.

MM508J MULTICO TM Tenoner. Instruction Manual with Parts as Exploded ComponentDrawings.

MM520 MULTIFIX Quick-Change Toolholders. Not a manual but a set of verydetailed and well-illustrated early to late Sales & Accessories Cataloguesshowing the complete range of equipment and dimensions. 18 pages.

MM525 MURAD CAPSTAN LATHE Service Manual. Electrical and mechanicalspecifications and Sectional Drawings together with a comprehensive 16-pageSales, Accessories and technical Specification Catalogue.

MM525A MURAD BORMILATHE - unfortunately no manual ever seems to have beenproduced for this ingenious machine but there is an excellent and detailedTechnical Sales and Specification Booklet available that has ScrewcuttingCharts and a full explanation of how the machine and its accessories function.20 pages.

MM530 MUREX Tranarc Tradesman DC130 Welder. Operating Manual with largeElectrical Diagram.

MM530A MUREX Tradestig DC-145 Welder. Operating Manual with Parts List andElectrical Diagram.

MM530B MUREX Tradestig 283 and 333S Welders. Operating Manual with Parts List andElectrical Schematics.

MM530C MUREX Tradestig Welders Models 2 x 2, 4 x 4 and 4 x 4HD. Operating Manual with Parts List andElectrical Schematics.

For MUREX see also BOC above

MM532 Myford/Drummond M-Type. Although there never was a proper"handbook" for the Myford/Drummond M Series of lathes, we can supply4 items that represent everything published about the lathe: Drummond 19213.5-inch M-Type. 12-pages plus 2-page letter from the makers. Drummond1930-1942 M-Type. Sales Booklet. Contains details of the essential headstockbearing adjustment technique a study of which will enable you to dismantle theheadstock safely. 12 pages. Myford/Drummond M Type lathe: The"transition" booklet when Myford took over manufacture in 1941. 12pages. Drummond M-Type Lathe: Special Attachments & Accessories Catalogue.16 pages.

MM372A
Myford ML1, ML2, ML3 and ML4 lathes. A complete and very interesting data pack for the lathes with all known literature - increased in size from the tiny originals to A4 for clearer pictures, drawings, charts and diagrams. Comprises six Sales and Accessories Catalogues (including what must have been the first ever, together with the last issued in 1946 that together show all the original extras offered) with one of them doubling as the small but useful Instruction Book with screwcutting charts and a price list. Also included is a very useful Myford instructional booklet for the later ML7 "Lessons in Lathe Work" showing all the common operations possible on these small machines; a 4-page booklet prepared by the factory for the ML2 to ML4 range but apparently never issued titled: "Particulars and Adjustments Concerning the Working of the Lathes and Accessories"; the long article by Tony Griffiths detailing the development of the lathes, their technical specification, suggested modifications and hints as to which parts from other Myford models can be used as spare parts - and a number of recently discovered photographs from the Myford Archives. 97 pages.

M974
Myford 4-inch Precision (MF Series 1940s). Unfortunately no manual was everissued for this lathe but some very rare and interesting sales literaturesurvives: a perfect copy of the main 6 page edition with a separate 2-pageprice list; a second 3-page catalogue and a single sales sheet. These are theonly known technical specification sheets for the 4-inch Myford that was manufacturedfrom 1940 to 1944.

MM534
Myford ML10 and Speed 10: A data pack with Operator's, Maintenance and PartsManuals covering both the early plain-bearing machines and the later Speed 10type with a roller-bearing headstock. Includes copies of the maker's early andlate Sales, Technical Specification and Accessories literature. Available withEnglish or German text.

MM534A
MYFORD "ML10 Lathe Manual" (Book of the ML10). Detailed user's guideand operating instructions.

MM535A
Myford ML7. A complete data pack for all versions including the Tri-Leva:Instruction & Maintenance Manual (with electrical connection/wiringdiagrams to the Dewhurst and Stanton switches for all common makes of electricmotor) an Exploded-diagrams Parts Manual together with together with a copy ofthe Myford Publication "Practical Turning on Myford 3.5-inch Centrelathes" - a booklet that gives step-by-step instructions (using thebuilding of model engines as examples) of how to employ a Myford lathe to besteffect. Also Included are several high-quality reproductions of Sales &Specification Catalogues (first to last editions) showing all the models andthe complete accessory range. 118 pages

MM535AG The ML7 W.M.E.D "Easy Change Screwcutting Attachment". Noteson Installation and Operation.

MM535SP Myford SPAREY SCREWCUTTING GEARBOX (this was an early box designed forthe ML7 and intended for home construction)- two large technical drawingsshowing how to machine and assemble the box.

MM535AA Myford "A Man and His Lathe" Improving and using the ML7lathe. A high-quality facsimile of L.H.Sparey's helpful book witten to assistowners of the ML7 get the best from the machine. Includes how to improve thelathe and guard against wear, a long section on how to make and employ a numberof useful accessories, using the maker's accessories and a chapter on"Aids to Better Results".

MM535B MYFORD ML7 Instruction and Maintenance Manual Original 1946 version withthe first-ever price list. Interesting, but scanty data.

MM535C MYFORD ML7R Instruction and Maintenance Manual with Parts as ExplodedComponent Drawings. Includes a copy of the maker's Sales, Accessories andTechnical Specification catalogue.

MM535D MYFORD ML7R Instruction and Maintenance Manual with Parts as ExplodedComponent Drawings together with a Sales and Specification catalogue showingthe complete accessory range.

MM536A
Myford Super 7 (and "Connoisseur) Instruction and Maintenance Manual withParts Manual as Exploded Component Drawings together with a copy of the MyfordPublication "Practical Turning on Myford 3.5-inch Centre lathes" - abooklet that gives step-by-step instructions (using the building of modelengines as examples) of how to employ a Myford lathe to best effect. Covers allversions of the lathe including the early model with a sight-glass oiler on theface of the headstock. Includes high-quality reproductions of several of Salesand Specification Catalogues chosen to show all the different models and the fullaccessory range. The Connoisseur section consists of instructions regarding theStarting of the lathe and electrical controls, 130 pages.
To help further we can also supply an excellent book, the: "Myford Series7 Manual". This is a comprehensive publication that covers the ML7,ML&R and Super 7. It includes:correct installation; tools; mounting work;general turning; boring and drilling; threading and screwcutting; tables forthreads; milling; gear cutting; taper turning; repetition work; accessories andfitments; Maintenance; lubrication charts; drawings and build instructions fora number of useful accessories, etc. .75 post-paid UK. See: Myford book

MM536AF MYFORD SUPER 7 French Tex edition - Instruction and Maintenance Manualwith Parts as Exploded Component Drawings.

MM537A Myford Screwcutting Gearboxes. There were two versions of the box: theearlier had a train of external gears under a detachable cover on the right-handface, the later version was entirely enclosed. The gears and settings for eachbox differ and this publications contains both editions with full details ofthe metric conversions sets needed and other important data.

MM538 Myford Mini-Kop Mk.1 The original Mini-Kop based on the Super 7 lathe -which it closely resembles - even to the fitting of a screwcutting gearbox.Instruction Manual, Workshop Manual and Parts Manual as Exploded ComponentDrawings.

MM538A Myford Mini-Kop Mk. 1A - identified by its square headstock with, on itsfront face, an electrical control panel with two push-buttons and a lever - thelathe being mounted on a abinet with open shelves; Instruction Manual, WorkshopManual and Parts Manual as Exploded Component Drawings.

MM538B Myford Mini-Kop Mk. 3 and 3a (flat-front cabinet with control box onright) Instruction Manual, Workshop Manual and Parts Manual as ExplodedComponent Drawings.

MM539 Myford ML8 Wood Lathe. A complete data pack consisting of: "Assemblyof Lathe and Countershaft" booklet - including complete exploded-partsdiagrams (this shows the relative position of parts and is useful for repairwork and damage-free dismantling). "Installation, Lubrication, Adjustmentand Parts List" - simple explanatory sheets. Copies of the headstock end,tailstock end and countershaft templates needed to accurately bench mount thelathe, A Copy of the first-ever sales Brochure, No. 800, together with a latercatalogue illustrating all the Accessories and giving a full technicalspecification for the lathe. Two Sales Brochures (one very rare)) for the"Multi-purpose Woodworker" and the "Complete Woodworker" -a catalogue which shows all the accessories ever made for the ML8: Planer andThicknesser - Illustrated advertising and technical sheets Planer - ExplodedParts diagram and list Planer - Installation, Maintenance and OperationInstructions Planer - Drilling template to mount the machine Planer -Instructions for sharpening and setting the planer blades Band Saw - 4-pagesales and specification catalogue together with the maker's Instruction andAdjustment leaflet Mortising Attachment - Illustrated advertising and technicalspecification sheets Combination (collet) chuck - Advertising sheets, technicalspecification and assembly instructions

MM530ML Myford Mystro Wood-turning lathe. Operator's Instruction &Maintenance Manual with Parts as Exploded Component Drawings.

MM539P Myford Planer andThicknesser. A compendium of data from all published about the machine:
Planer & Thicknesser - Illustrated advertising & technical sheets;Planer - Exploded parts diagram and list; Planer - Installation, Maintenanceand Operation Instructions; Planer - Instructions for sharpening and settingthe planer blades.

MM540 Myford 280 Geared-head Lathe. Instruction and Maintenance Manual and Parts Manual as Sectional Drawings.

MM540F Tour à tête dentée. Édition en langue française. Manuel d'instructions et d'entretien et manuel des pièces sous forme de dessins en coupe
Myford 280 Geared-head Lathe. French-language Edition. Instruction and Maintenance Manual and Parts Manual as Sectional Drawings.

MM541 Myford 254S Operation & Maintenance Manual and Spare Parts Manual asExploded Components Diagrams.

MM541A Myford 254R Operation & Maintenance Manual and Spare Parts Manual asExploded Components Diagrams.

MM541B Myford 254 "Plus" Operation & Maintenance Manual and SpareParts Manual as Exploded Components Diagrams.

MM542 Myford 2-speed Motor (Brook Compton) special 2-sheet wiring diagramshowing the original Myford-supplied switch gear and installation.

MM543 MYFORD DIVIDING UNIT. How to mount and use the Myford DividingAttachment.

MM545 Myford MG12 Grinder: Detailed Instruction Manual with an IllustratedParts List as Detailed Sectional Drawings, an Electrical Schematic and a copyof the maker' Sales and Technical Specification Catalogue.

MM545A Myford MG12-HA/HAC Grinder: Detailed Instruction Manual and IllustratedParts List as Detailed Sectional Drawings and an Electrical Schematic.

MM545AG Myford MG12-HA/HAC Grinder: Detailed Instruction Manual and IllustratedParts List as detailed sectional drawings and an Electrical Schematic.

MM545B Myford MG12-HP and MG12-HPC with Automatic-cycle Traverse and PlungeGrinding: Instruction Manual, Parts as Detailed Sectional Drawings and anElectrical Schematic. Includes the Supplement Covering the Plunge Feedmechanism.

MM545C MYFORD MG12-HPT Grinding Machine with Automatic-cycle Traverse and PlungeGrinding: Instruction Manual, Parts as Detailed Sectional Drawings and anElectrical Schematic.

MM546VMA MYFORD VM-A Milling Attachment - made by Rishton. Operator'sInstruction Manual with Parts as Sectional drawings. This publication coversthe head unit and also the Rishton compound table with a Rishton electricaldiagram and copies of the Myford and Rishton Sales and SpecificationCatalogues.

MM546A MYFORD VM-B Milling Machine. Operator's Instructions with Parts asSectional drawings. Includes an electrical diagram and a copy of the maker'sSales and Specification Catalogue.

MM546 Warco-Myford VM-C, VM-E "A1S", "AM", "A1" and "VO-A1 Milling Machines (also sold badged with names). This is a collection of data for these models that often had the designation "A1S", "AM", "A1" and "VO-A1" in their model-type description. Three publications are included, two for the Myford-badged models and another for the "generic" Warco type. Operator's Instruction Manuals with Parts as Sectional drawings. Includes two copies of the maker's Sales and Specification Catalogue and price lists for the VM-C and VM-E.

MM546E MYFORD VM-E Milling Machine (Myford VME). This is the model with the ram head in the form a cylinder that allows the head to be tilted each side of vertical.Operator's Instructions with Parts as Sectional drawings. Includes a copy of the maker's Sales andSpecification Catalogue and price lists.

MM546F MYFORD Turret Attachment for ML7 and Super 7 Lathes (Accessory 1408). Instructions and Drawings for Drilling and Reaming the holes in the turret head.

MM600 MYSORE KIRLOSKAR 4 Senior Capstan lathe. Parts as Exploded ComponentDrawings.

MYSORE KIRLOSKAR - see also under ENTERPRISE

MN220A Naerok "918" lathe. Excellent illustrated Operator's andMaintenance Manual with Sectional Drawings.

MN220B Naerok 12" swing wood lathe Type WL12037. Operator's InstructionBook, Exploded Component Parts List and electrical diagram.

MN220C Naerok Bandsaw (also branded NuTOOLS). Operator's Instruction Book andExploded Component Parts List.

MN222 NAGEL Deep Hole Drilling Machine. Operating Instructions.

MN228 NAKAMURA-TOME TMC 30 Turning Centre. Instruction and Operating Manual(with Nakamura-Fanuc OTE/10TE/10TEF Control)

MN228A NAKAMURA-TOME TMC 35 and TMC 35X CNC Turning Centre. Instruction and Maintenance Manual(with Nakamura-Fanuc OTA/10TE-F and OTTA/11TTE-F Controls)

MN228B NAKAMURA-TOME Super-Turn 3 & 4 Turning centre, Spare Parts Manual asExploded Component Drawings.

MN230 NAMCO (BSA-NAMCO) DIEHEADS andCHASERS - GRINDING INSTRUCTION MANUAL for self-opening Dieheads - see under BSAabove.

MN232 NAM SUN NSM-T Milling Machine. Parts Manual as sectional Drawings.

MN232A NAM SUN NSB-U1500 Milling Machine. Parts Manual as sectional Drawings.

MN234 NARDINI MS-1400, MS-1600, MS-175 and MS-205 Series Lathes. Operator'sInstruction and Maintenance Manual with Parts as Exploded Component Drawings.and an Electrical Schematic.

MN235 NAREX (Naradi) Boring Heads VHu56, VHu80 and VHu125. OperatingInstructions,

MN250 NASSOVIA FMK 500 Vertical Copy Milling Machine "Sentidux".Instruction Manual with Electrical and Hydraulic Schematics.

MN250A NASSOVIA Automatic Die Sinker VA 1.11-2 Instruction Manual with Electrical and Hydraulic Schematics.

MN260 Natgraph Exposure Unit M3A. Operator's Guide with Installation, Maintenance and Wiring Diagrams.

MN275 NATIONAL "MAXIPRESS". Operator's Instruction, Maintenance andLubrication Manual, Parts Manual as Exploded Component Diagrams, electrical andHydraulic Schematics.

NAXOS -see under UNION (NAXOS-UNION).

MN280 NEBEL Lathes. Operating and Maintenance Instructions for Geared-headmodels:

MN290 NEWBOLD Segmental Saws. Selection, Operation & Maintenance. A booklettitled "What you should know about the Newbold Segmental Saw"
NEWBOLD Segmental Saws

MN300 NEW BRITAIN AUTOMATIC Model657: Instruction and Maintenance Manual.

MN300A NEW BRITAIN AUTOMATIC Model 661: Parts Manual as Detailed SectionalDrawings.

MN300B NEW BRITAIN AUTOMATIC Model 60: Operator's Instruction Book.

MN300C NEW BRITAIN AUTOMATIC Model 60: Parts Manual as Detailed SectionalDrawings.

MN300D NEW BRITAIN AUTOMATIC Model 60: Tool Holders Manual. DimensionedDrawings.

MN300E NEW BRITAIN AUTOMATIC Model 61: Operator's instruction Manual.

MN300F NEW BRITAIN AUTOMATIC Model 61: Parts Manual as Detailed SectionalDrawings.

MN300G NEW BRITAIN AUTOMATIC Model 61: Tool Holders Manual. DimensionedDrawings.

MN300H NEW BRITAIN AUTOMATIC Model 61- 15/8": Operator's Instruction Book.

MN300J NEW BRITAIN AUTOMATIC Model 62 six-spindle Automatic bar machine:Operator's Instruction Manual.

MN300K NEW BRITAIN AUTOMATIC Model 62 six-spindle Automatic bar machine: PartsManual as Detailed Sectional Drawings.

MN300L NEW BRITAIN AUTOMATIC Models 412, 695 and 88 Multi-spindle Automaticchucking machines: Parts Manual as Detailed Sectional Drawings.

MN300M NEW BRITAIN AUTOMATIC 6956-spindle Automatic chucking machine. Operator's Instruction Book. NEW VISBY - see under PURCELL below

NEWHALL-BURGMASTER - See under "BURGMASTER"

NEWALL-KEIGHLEY - this was the name used by NEWALL for their Grinders. Seelisting below.

MN310 NEWALL Crankshaft Grinding Machines: Maintenance and Setting UpInstructions

MK310BG NEWALL-KEIGHLEY "BG" GRINDER (including Single-arm automaticloader): Instruction Manual and Parts Manual as detailed Sectional Drawings.Includes 4 large Electrical and Hydraulic Schematics.

MN310/3D NEWALL 3D Turbine Blade Grinder Single-wheel CRANKSHAFT Grinder:Operating and Maintenance Manual with Hydraulic and Electrical Schematics.

MN310DJ NEWALL DJ Single-wheel CRANKSHAFT Grinder: Operating and MaintenanceManual with Hydraulic and Electrical Schematics.

MN310FG NEWALL FG Angular-head Grinder: Operating and Maintenance Manual withHydraulic Schematics and Parts as Sectional Drawings.

MN310HAC NEWALL HAC CRANKSHAFT Grinder: Operating and Maintenance Manual andParts as Sectional Drawings.

MK310KG NEWALL Keighley"KG" GRINDER: Instruction Manual with ComprehensiveElectrical and Control Schematics.

MK310KG3 NEWALL KG300 GRINDER: Operating and Maintenance Manual with Electricaland Control Schematics.

MN310KN NEWALL KN Internal Grinding Machine: Operating and Maintenance Manualwith Parts as Sectional Drawings.

MK310KS NEWALL KS Internal grinding Machine. Instruction Manual with sectionalDrawings.

MK310KSE NEWALL KSE Internal grinding Machine. Simple 8-page Instructions withadditional assorted sectional Drawings.

MN310KU NEWALL KU Universal Grinder: Two editions of the Operating andMaintenance Manual with Parts as Sectional Drawings. Includes two editions ofthe maker's Sales & Specification Catalogues.

MK310KU16 NEWALL KU16 Grinder: Instruction Manual and Maintenance Manual.

MN310L NEWALL Type L (all Models) Plain Grinding Machine: Operating andMaintenance Manual with Parts as Clear Sectional Drawings.

MN310L4 NEWALL Type L4 and L6 Plain Cylindrical Grinding Machine: Operating andMaintenance Manual with Parts as Sectional Drawings. Short edition or fulledition

MN310L12 NEWALL Type L12 External Cylindrical Grinding Machine: Operating andRoutine Maintenance Manual.

MK313L12A NEWALL L12A. Angle Approach Grinding Machine: Instruction Manual.

MN310LAHLF NEWALL LA and HLA Cylindrical Grindings Machines: Operating andMaintenance Manual with Parts as Sectional Drawings.

MN310LA NEWALL LA Cylindrical Grindings Machines (only): Dedicated Operatingand Maintenance Manual with electrical schematics.

MN310U/LA NEWALL U/LAa Grinder (Plunge Cut Cylindrical Type). Operating andMaintenance Manual.

MN310MAC NEWALL MAC Multi-wheel Grinding Machine: Operating and MaintenanceManual with Parts as Sectional Drawings.

MN310MAF NEWALL MAF-1040 Multi-wheel Cylindrical Grinding Machine: Operatingand Maintenance Manual.

MN310MAS NEWALL MAS-1040 Multi-wheel Cylindrical Grinding Machine: Operatingand Maintenance Manual with Electrical Schematics.

MN310MJ NEWALL MJ-1040 Multi-wheel Cylindrical Grinding Machine: Operating andMaintenance Manual with Parts as Sectional Drawings.

MN310MU NEWALL MU Cylindrical Grinding Machine: Operating and MaintenanceManual with Parts as Sectional Drawings.

MN310NL NEWALL Type NL (SNL and LNL) Grinding Machine: Operating andMaintenance Manual with Sections on the Straight Flute Relieving Attachment,Spiral Flute Relieving Attachment, Optical Equipment, Surface GrindingAttachment, Internal & Hob Grinding Attachment, Wheel Crushing EquipmentUniversal Dresser, Thread & Profile Dresser, Newall "75"Pantograph Dresser, Newall "125" pantograph Dresser, Newall"475" Pantograph Dresser and the Plunge Grinding attachment.

MN310SA NEWALL SA Single-wheel Grinding Machine: Operating and MaintenanceManual with Hydraulic and Electrical Schematics.

MN310GG NEWALL Groove Grinder L12 x 24. Operating and Maintenance Manual.

MN310FB NEWALL Fine Boring Machines Models A and B. Operating and MaintenanceManual with Electrical Schematics.

MK310XL NEWALL XL Cylindrical Grinding Machine. Instruction Manual and PartsManual as detailed Sectional Drawings.

NEWALL Jig Borer Manuals

MN311 NEWALL Jig Borer No. 0 Operating and Maintenance Manual with Electricalschematics.

MN311A NEWALL Jig Borer No. 1 Operating and Maintenance Manual with Electricalschematics. (The Newall No. 1 was renamed the 2436 and then, with just agreater table capacity was sold as the 2436 Mk.2, and then finally renumberedas the 2443.

MN311B NEWALL Jig Borer Model 1520 JIG BORER. Operator's Instruction andMaintenance Manual.

MN311B NEWALL Jig Borer Model 2436 Mk. 1 and Mk.2 Operating and MaintenanceManuals (three editions are included) and a copy of the Maker's Sales andSpecification and Accessories Catalogue. Includes the separate Operating Notesfor the 1520 Airmec Jig Borer.

MN311E NEWALL Jig Borer Model 2442 Types H and L. Operating and MaintenanceManual.

MN311F NEWALL Jig Borer Model 2443 Operating and Maintenance Manual with Partsas Sectional Drawings, Electrical Schematic and a copy of the maker's Sales andSpecification Catalogue.

MN311F3 NEWALL Jig Borer Model 2443 Mk. 3 Operating and Maintenance Manual withParts as Sectional Drawings, Electrical Schematic and a copy of the maker'sSales and Specification Catalogue.

MN311G NEWALL Jig Borer Model JMT/24A51/D2NE Operating and Maintenance Manual.

MN311H NEWALL Jig Borer Model 2451 Types "H" & "L"Operating and Maintenance Manual with an Electrical Schematic.

MN312 NEWALL "RIGIDLAP" Universal Lapping machine. Operating and MaintenanceManual (pc) with a copy of the maker's Sales and Specification and AccessoriesCatalogue.

MN313 NEWALL DIGITAL READOUT system Type ESP-515 Mk.3. Operating andMaintenance Manual.

MN313X NEWALL DIGITAL READOUT system Type ESP-522. Operating andMaintenance Manual.
MN313A NEWALL DIGIPAC 3 operator's hand book

MN313B NEWALL DIGIPAC 4. User's Guide.

MN313C NEWALL DIGIPAC 5. User's Hand book.

MN313D NEWALL DIGITAL READOUT Mark 111 Operating and Maintenance Manual.

MN313E NEWALL (OMT) Horizontal Precision Measuring Machine. Basic OperatingInstructions. 8 pages

MN313F NEWALL DP7 Digital Read Out Counter. Installation and OperatingInstructions.

MN313G NEWALL SPHEROSYN Digital Read Out System. Special InstallationInstructions.

MN313H NEWALL Pin and Journal Grinders. Huge and Detailed Hardware and Software Operating Instructions for the SiemensSIMATIC 55 DG635 Programmer. . 600 pages.

MN313J NEWALL Measuring Machine. Not really a manual, but it does include 2 pages og Operating Instructions. 8 pages.

NEWHALL-BURGMASTER - See under "BURGMASTER"

MN415 NEW BRITAIN (BRITAIN-GRIDLEY) Model 40, 42, 60 and 61 Four and SixSpindle Automatic lathes Setting Up and Operating Manual.

MN415A NEW BRITAIN (BRITAIN-GRIDLEY) Model 61 Parts Manual as detailedSectional Drawings.

MN415B NEW BRITAIN (BRITAIN-GRIDLEY) Models 49 and 675 4 and 6 SpindleAutomatic Chucking Machines. Operator's Instruction Book.

MN417 NEW HERMES Tool and Cutter Grinder CG-4. Operating Instructions (6 pages)

MN419 NIBBLER Universal Sheet Steel Plate Working Machine: Instruction Manualwith Electrical Diagram.

MN419A NIBBLER SENIOR Sheet Steel Plate Working Machine: Instruction and MaintenanceManual.

MN520 NICHOLS Milling Machine USA. All-models Maker's Instruction Manual andMaintenance Guide. Includes a copy of the Makers 11-page Sales, Accessories andTechnical Specification Catalog.

MN560 NICHOLS (Rex Nichols, Birmingham) Two-spindle nut tapping machine.Operator's Handbook

MN625 NICKOLS AUTOMATICS (UK) Hydraulic Control Systems: charts to plot set-upsand descriptive literature.

MN625A NICKOLS AUTOMATICS (EMI) Auto Herbert 2D. Detailed Operator's Instructionand Maintenance Manual for this single-spindle Auto lathe fitted with Nickols(EMI) controls.

MN625B NICKOLS AUTOMATICS "The Nickols System of Automatic for Ward Capstan Lathes".Detailed and well-illustrated Service Manual describing how the system is applied to any conventionalcapstan lathe. Includes electrical and pneumatic Schematics, programming examples and fault finding.

MN625C NICKOLS Sprint Automatic Capstan Lathe. Service Manual.

MN680 NIIGATA 2HMB Milling Machine. Operator's Instruction and MaintenanceManual with Parts as Sectional Drawings and a large Electrical Schematic. Theoriginal copy was printed on "blue" paper using a spirit duplicatorhence the drawings, even after being scanned at 800 d.p.i., are not of the bestquality. The text is perfectly clear. Includes a copy of the maker's Sales& Technical Specification Catalogue.

MN682 NIKKEN CNC Rotary Tables (Circular tables). Detailed Instruction Manual

MN690 NIKON Model 6C Profile Projector. Instruction Book.

MN700 NILES WMW VEB DLZ-500, DLZ-630, DLZ-800, DZ500 and DZ630 Lathes (WMW, VEBand UNION East Germany) Huge Operator's Instruction and Maintenance Manual withMechanical and Electrical Schematics.

MN730 NOBLE and LUND AL/CC Sawing Machine Model (with Automatic Lubrication andChip Conveyor). Operator's Instruction Manual with electrical circuit diagrams,basic Maintenance, fault-finding guides, how to set up the Fluidfeed system,etc.

MN730A NOBLE and LUND S.B. Circular Saw Sharpening machine. Operator'sInstruction Instructions.

MN730B NOBLE and LUND S.E. Circular Saw Sharpening machine. Operator'sInstruction Instructions.

MN730B NOBLE and LUND "FLUIDFEED" CIRCULAR SAWING MACHINE. Operator'sManual including Hydraulic Schematic.

MN730C NOBLE and LUND Model WGD 54-inch "FLUIDFEED" Cold Saw.Operator's Manual + Electrical Schematics, including Wiring and HydraulicSchematic and Foundation Plans.

MN730C NOBLE and LUND VLHMA Vertical Milling Machine. Operator's Instructionand Maintenance Manual with Parts Manual as fold-out Sectional Drawings.

MS218 Norfolk,Perris, Hector, Flexispeed, Simat 101, Meteor, Meteor 2, Perrisand Derivatives. A complete 150-page Data Pack containing everything everpublished for these miniature lathes: Sales and Specification Sheets,Illustrated Parts Manuals, sheets of Assembly Instructions for the Perrisversion and the Flexispeed, Simat and Meteor. A separate 5-page Manual for theMeteor 2 is also included. Full-size "blue print" (in sections) andan additional 8-page Mk. 1 Sales and Specification and Accessories Cataloguetogether with specification and price lists from the 1970s.

NORTON SURFACE GRINDERS Models can be difficult to recognise. Send a picturesif you are not sure which you have. e-mail: manuals@lathes.co.uk

MN850 NORTON COMPANY - CENTRELESS GRINDING: an introductory guide by the NortonCompany.

MN850A NORTON CV-4 and LCV-4 Angular Slide Wheel Grinders Semi-automatic Types.Instruction, Adjustment and Lubrication Manual and Parts Manual as ExplodedComponent Diagrams.

MN850A2 NORTON 10" Type CV-5 Cylindrical Grinder. Operator's Instructionand Parts Manual as exploded component drawings

MN851 NORTON Model S1 Surface Grinder 12", 14" and 16".Instruction Manual and Illustrated Parts Manual with a Separate LubricationBulletin.

MN851A NORTON Model S-3 Surface Grinder 8" x 24": Instruction Manualand Parts Manual as Sectional and cut-away Drawings.

MN851B NORTON Surface Grinder: 5" x 10" Model. Instruction Manual andParts Manual as Section-through Drawings.

MN851C NORTON Model TS Surface Grinder: 6" x 12" Hand -operated.Instruction Manual and Parts Manual as Exploded Component Drawings.

MN851D NORTON Surface Grinder 6" x 18 with either horizontal or verticalwheels. Instruction Manual and Parts Manual as Sectional and cut-away Drawings.

MN851E NORTON Surface Grinder 6" x 18" Model S-3: Instruction Manualand Parts Manual as Exploded Component Drawings.

MN851F NORTON Surface Grinder: 10" Model (older type recognisable by thelarge curved head support). Instruction Manual and Parts Manual as SectionalDrawings.

MN851G NORTON Surface Grinder (hand -operated model) 10" x 16":Instruction Manual and Parts Manual as Exploded Component Drawings withElectrical Schematic.

MN852 NORTON Type C-5 and C5-HD Cylindrical Grinder Instruction Manual andParts Manual as Exploded Component Diagrams.

MN852A NORTON Type 10" CTU, 14" LCTU, 10" CTU-HD and 14"LCTU-HD Cylindrical Grinders . Instruction, Adjustment and Lubrication Manualand Parts Manual as Exploded Component diagrams.

MN852B NORTON Type C 14-inch, 16-inch and 18-inch Cylindrical Grinders,Heavy-duty high Swing Grinders and 42-inch x 72-inch Special Universal Jet PartGrinders. Instruction, Adjustment and Lubrication Manual and Parts Manual assectional drawings.

MN852C NORTON 6" Type C Cylindrical Grinder - covers all hand, hydraulicand semi-automatic models. Detailed Operation & Maintenance manual with anumber of useful sectional drawings and a hydraulic schematic.

MN853 NORTON UNIVERSAL GRINDER10-inch (with sliding table and swivel table). Instruction and Parts Manual (asexploded-component and cut-away Drawings).

MN854 NORTON No.3 Cam-O-Matic Automatic Cam Contour Grinding Machine.Instruction Manual and Parts Manual as Exploded Component Drawings.

MN855 NORTON No. 26 HYPROLAP Lapping Machine. Operator's Instruction andServicing Manual with Parts Manual as Detailed Sectional Drawings.

MN855A NORTON CRANK-O-LAP No. 31: Operator's Instruction Manual, Electricaldetails and fold-out Sectional Drawings.

MN860 NORTON: a brief guide to Centreless grinding.

MN861 NORTON Lubrication of Norton Grinders: listing of machines and correctoils and greases to use.

MN862 NORTON: Hydraulic Production Presses 7.5 - 10 tons. Instruction andMaintenance Manual with Sectional Drawing. Includes the "Deadlength"Strip Feed Unit Manual.

MN862A NORTON Multi-speed Roll Feed Machines. 4-page Operating Instructions with a futher4 pages of explations and notes concerning Producing precion-wrapped bushes from strip material.

MN870 NORWELD Welding Rectifier TIG-182 Directions for use with ElectricalSchematic.

MN871 NOVA DVR-XP Wood Lathe. Operator's Instruction and Maintenance Manualwith Parts as Exploded Component Drawings.

MN871A NOVA 1624/44 Wood Lathe. Operator's Instruction and Maintenance Manualwith Parts as Exploded Component Drawings.

MN872 NOVAMODUL Grinding Machine Type S8M-910-HWFX Operator's Instruction andMaintenance Manual.

MN875 NOVAR 1.VR vertical Milling Machine Operator's Instruction Manual withParts as Detailed Sectional Drawings

MN875A NOVAR 1.AR Horizontal Milling Machine Operator's Instruction and Manualwith Parts as Detailed Sectional Drawings

MN880 NSK Nakanishi ELECTER Miniature Engraving Tool. Instruction andMaintenance Manual

MN888 NUM (Group Schneider) 1060 Profil User's Manual (creating contours milling and turning).

MN888A NUM (Group Schneider) 760T Large Programming Manual.

MN890 NU-TOOL (NUTOOL) CH10 Bench Drill. Operation Instructions and Parts as ExplodedComponent Drawings.
MM890A NU-TOOL MTL-400P combined lathe and milling machine (vertical milling head on top of the lathe headstock) - also sold braned as the Clarke CL500M and with other brandings.Operating & Maintenance Instructions with Parts as exploded-component drawings and English and Metric screwcutting charts and set-up instructions.

MO100-DE OERLIKON Lathe Model DM1/1a: Detailed Operator's Instruction Manual.German text including an electrical diagrams.

MO100A OERLIKON Lathe copying attachment Model HKv. Operator's InstructionManual:

MO100B OERLIKON R2 JIG BORER Model: Operator's Instruction Manual: Englishannotations to German text. Fold-out diagrams with several electricalschematics.

MO100C OERLIKON RE3S Jig Borer. Working Instructions, Maintenance andAdjustment Manual with Maker's Sales and Specification Catalogue.

MO100D OERLIKON UB2 UNIVERSAL DRILLING and BORING MACHINE. Operator'sInstruction and Maintenance Manual with Parts Manual as Sectional Drawings.Includes a copy of the maker's Sales and Specification catalogue.

MO100E OERLIKON F.60 Open Ended Chucking Lathe. Working Instructions,Maintenance and Adjustment Manual with Parts as Sectional Drawings. 2

MO100F OERLIKON FM3 and M Series - "APPENDIX 3 INSTUCTION MANUAL FOR THEUSE OF 20 and 30 run 3rd STEP AUTOMATION".

MO100G OERLIKON Lathe Model DE0a Detailed Operator's Instruction &Maintenance Manual including Electrical circuit diagrams, useful sectionaldrawings and spindle-speed, screwcutting and feed charts, etc. GERMAN TEXT.

MO100H OERLIKON Spiromatic 1 & Spiromatic 2 Spiral Bevel Gear Cutters. Detailed"Gear Calculation Manual" with worked examples. English, French &German Text.

MO100G OERLIKON Spiromatic 1 & Spiromatic 2 Spiral bevel Gear Cutters.Tables of five place transmission ratios from 0.10000 to 0.99999 in 0.00001intervals for 6 gears.

MO100H OERLIKON Tool & Cutters Grinders FS21 and FS21a Detailed Operationand Maintenance Manual

MO100J OERLIKON Precision Boring and Millings Machines KC4, KC5, and KC6-R12PL. Detailed Operationand Maintenance Manual with Parts Manual as Sectional Drawings. English, French and German Text.

MO125 OHLER KA400 Cold Circular Saw. Detailed Operating Instructions with a Hydraulic Schematic.

MO150 OKAMOTO 1GM-1E Internal Grinder: Operating Manual with electricalschematics - this is not the clearest of reproductions, but readable. Alsoincluded is a copy of the Operator's Instruction Manual for the FeinprufMillipneu Surface-finish Comparison Gauge.

MO200 OKUMA TYPE LS Toolroom Lathe. Data Pack consisting of: Operator's andMaintenance Manual with the special "Service Drawings" (originally aseparate publication), a second, more concise edition and a copy of the maker'scomprehensive Sales, Technical Specification and Accessories Catalogue. MO200A OKUMA TYPE LS Toolroom Lathe. Illustrated Parts Manual with ExplodedAssembly Diagrams of the entire machine showing the construction and assemblymethods and complete Electrical Schematics.

MO200C OKUMA LA40-N Numerically Controlled Lathe. Operator's Instruction Manualand Service Manual.

MO200D OKUMA LC20 CNC Lathe with OSP-3000L CNC System.Comprehensive Operation & Maintenance Manual with electrical schematics.

MO200DP OKUMA CNC Systems OSP500L-G and OSP5000L-G. Detailed Programming Manual (7th edition) 442-pages

MO200D2 OKUMA LC20 CNC Lathe. Comprehensive Operation and Maintenance Manual withElectrical Schematics.

MO200D3 OKUMA LC20 CNC lathe Parts Manual as Exploded-component Drawings.

MO200D3 OKUMA LC10, LC20. LC30, LC40 and LC50 Numerically Controlled Lathe withOSP-5000L CNC System. Huge Operation and Programming Manual.

MO200E OKUMA LS-N CNC Lathe: covers the LS-N4, LS-N6, LS-N4/6, LS-N8, LS-N10,LS-N. Parts as exploded Component Drawings.

MO200F OKUMA GPB Cyclic Plain Cylindrical Grinder. Operator's InstructionManual and Maintenance Manual with 8 Electrical Schematics

MO200G OKUMA LC40 Lathe. Manual of Electrical Drawings. 83 pages.

MO200H OKUMA Lathes with OSP 5000-LG Control. Labelled "Concise Workshop Manual" for the 4-axis version - but actually contains: General Notes, Addresses, G Codes, M Codes,Setting & Proving Procedure, Zero Sets, Tool Offsets, Tool Shape, M.D.I., Program Selection, Graphics, Overtravel Release,Mid-Auto-Manual Function, Sequence Restarts 4-axis,Sequence Restarts 2-axis, Restart by Sequence Number search 4-axis and 2-axis, Edit Functions, Soft Limits, Chuck and tailstock Barriers, Tool Barriers, PARAMETERS, IGF and Software Loading.

MO225 OLDFIELD and SCHOFIELD (also Broadbent and Scholfield) GeneralInstruction and Operator's Instruction Manual for the Type A, C and D Typelathes. Includes an electrical diagram.

MO270 OLIVER No. 20 Rotary Shears (Lockseamer): Operating Instructions withParts manual as Sectional Drawings.

MO270A OLIVER No. 25 Shears: Operating Instructions with Parts as SectionalDrawings.

MO270B OLIVER Bolted Bending Bars Hand Brakes ( Box and Pan Floor Models)Operating Instructions. 3 pages.

MO270C OLIVER Press Brake No. 131. Operating Instructions.

MO270Z OLIVER 510 Drill Sharpening machine. Operator's Instruction andMaintenance Manual with Parts as Sectional Drawing.

MO280 OLIVER Instrument Company No. 2 Arc Cutter Grinder. Operation Manual.

MO305 OMT ETAMIC UNIVERSAL HEAD: Operation Instructions with Wiring Diagramsand a "Special Instructions" Manual:

MO305A OMT 10-inch and 12-inch Rotary Tables. Operating Instructions.

MO310 O.M.Z. (OMZ) Turret Drilling Machine, Service and Operator's InstructionManual with Parts Manual as Sectional Drawings and two Electrical Schematics.Includes a copy of the maker's Sales & Technical Specification Catalogue.

MO312 OPHER 10-20 Surface grinding Machine. Instruction and Parts Manual with an electrical schematic.

MO320/MJ158 OPTIDRESS Wheel-dressing attachment (by Precision Grinding Ltd.).Operator's Instruction Manual with Parts Manual as Exploded Component Pictures.Includes later Addendum.

MO320A/MJ158A OPTIDRESS E Wheel-dressing attachment (by Precision GrindingLtd.). Operator's Instruction Manual with Parts Manual as Exploded ComponentPictures. Includes later Addendum.

MO450 OPUS Filing and Jig-saw Machine Model 120. Instruction Booklet. English,Italian, French and German text.

MO450A OPUS Filing and Jig-saw Machine Model 140. Instruction Booklet. English,Italian, French and German text.

ORAC Computer-controlled lathes - see DENFORD

MO475 ORCUTT 20-inch and 36-inch Spline Shaft Grinding Machines. Operator'sInstruction and Maintenance Manual with Parts as Sectional Drawings.

MO475A ORCUTT Hydraulic Gear Grinding Machine Type HM. Operator's Instruction and Maintenance Manual with sets of Sectional Drawings of the Working Parts.

MO475B ORCUTT Helical Gear Grinding Machine HK 111. A Detailed Manual with sections on Indexing Setting and Operation; Hydraulics, Automatic Cycle and feed Control; Wheel Trimmers Setting and Operation and a copy of the maker's Sales & Technical Specification Catalogue.

MO480C ORMEROD Shapers.Ormerod Shapers 10 to 20-inch stroke. Sectional PartsDrawings, a copy of the "All-Models" Operation Manual and threecatalogues, one early edition, the other two later.

MO480D ORMEROD Slotters: 4.5", 6.5", 14" and 16" Models.Operator's Instructions.

MO500 ORN Model GK Lathe (Storebro Bruks) Operator's Instruction Manual withscrewcutting charts and Parts as Sectional Drawings. (English or German text)

MO600 OSAI 8600 GP FAST Use and Programming Manual.

MO600A OSAI 8600 MC and MC-TC Programming & Operator's Manual (a hugepublication).

MO600B OSAI 8600 MCE User's Manual (a huge publication).

MO600C OSAI 8600 TC Programming & Operator's Manual (a huge publication).

MO700 OVERBECK "Zetto 20" Cylindrical; Grinding Machine. OperatingInstructions with Wiring Diagrams and Lubrication Instructions.

MO700A OVERBECK 250 RU (250-RU) Grinding Machine. Comprehensive InstructionManual.

MO700B OVERBECK 250i and 350i (also appears to cover the 400i) Grinding Machines. Comprehensive Instruction Manual withHydraulic Schematic and many useful sectional drawings.

MO700C OVERBECK 250/400 I-HA Grinding Machine. Comprehensive Instruction Manualwith Wiring Diagrams, Hydraulic Schematic and Hydraulic Parts List.

MO700D OVERBECK 400 IR Grinding Machine. Comprehensive Instruction Manual withWiring Diagrams, Hydraulic Schematic and Hydraulic Parts List.

MO700E OVERBECK 250/400 IR Grinding Machine. A bound set of 44 WiringSchematics plus hydraulic schematics and other wiring diagrams.

MO700F OVERBECK 400 RU (400-RU) Grinding Machine. Comprehensive InstructionManual.

MO700G OVERBECK 400 RE Precision Grinding Machine. Comprehensive InstructionManual.

MO700H OVERBECK 400 RE-VA Precision Grinding Machine. Comprehensive InstructionManual with Wiring Diagrams, Hydraulic Schematic and Hydraulic Parts List.

MO700J OVERBECK Mikro-CNC 400 IR and 600 IR (400-IR and 600-IR) PrecisionGrinding Machine. Comprehensive Instruction Manual with Wiring Diagrams,Hydraulic Schematic and Hydraulic Parts List.

MO700K OVERBECK 600 RSE-VA Grinding Machine. Comprehensive Instruction Manual.

MO700L OVERBECK 600 RU (600-RU) Grinding Machine. Comprehensive InstructionManual with Wiring Diagrams.

MO700M OVERBECK 600I CNC. A bound set of 29 sheets of electrical schematics.

MO700N OVERBECK MIKRO-CNC BN-5403 Grinding Machine: Three manuals: Operator'sInstruction and Programming, Connection and Start-up Operation and FunctionExtension Software Version 2.0 and follow-ups.

MO700P BN 6452.1040 Switching over Amplifier. Technical Manual.

MO750 OXFORD MIG Welding machines. Instruction Manual

PACEMAKER Lathes: see the entry above under "American Pacemaker". - -

For"PARKINSON" MILLERS see under the makers PARKSON

MP10 PARKSON 1NA MILLING MACHINE (also covers the very similar 1N Type):Operating and Maintenance Instructions (simple) and Illustrated Parts Manualwith Exploded Assembly Diagrams and Lubrication Schematic. Also included is acopy of the

MJ158C PG Profiloscope andProjectorscope. Operating Instructions together with a detailed Sales &Technical Specification Catalogue.

MP224 PG Technology System 620Instruction Manual

MP225/MC63G
PGM-Staveley SH200 Gear Hobbing Machine (also marketed as RED-RING) .Operator's Instructions.

MP226 PHEKA Band SAW Models HS, HSL and HVS 260.Operator's Instruction andMaintenance Manual. Includes copies of the maker's technical Sales andSpecification literature.

MP227 PHILIPS (Philips Darenth) FILTRATION: Clarifier Type 1010/00. Operating Manual.

MP227A PHILIPS (Philips Darenth) MAGNA-DRUM Clarifier. Operating Manual.

MP227BB PHILIPS E 7744/22/23/25/27/28/29/30 and F 7760/01 - E 7775/01 and E7755/22/23/25/27/28/29/30 Universal, Magnetic Drum and Combined Clarifiers.Operating Manual in English, French, German and Dutch text.

MP227CC PHILIPS (Philips Darenth) Filtration Universal Clarifier Type 1012. Operating Manual with Electrical Schematic. English, French, German and Dutch text.

MP227DD PHILIPS (Philips Darenth) Filtration Universal Clarifier Ten Hundred Series Models 1010, 1020, 1030 and 1040. Operating Manual. English, French, German and Dutch text.

MP227B PHILIPS PE2472 and PE2473 Digital Readouts Operating and InstallationManual.

MP227C PHILIPS WELDER PZ5805/30, PZ5807/30 and PZ5809/30. Operating andInstallation Manual with 4 wiring diagrams, one "exploded component"picture of the control panel showing wire runs and colours and two printedcircuit diagrams.

MP227D PHILIPS Series CNC3000 including CNC3480, CNC3580 and CNC00 OperatingManual.

MP227E PHILIPS Series CNC3000 Types CNC3480, CNC3580 and CNC00 Programmer'sManual.

MP227F PHILIPS Type CNC 3360 Operating Manual.

MP227G PHILIPS Type CNC 3360 Programmer's Manual.

MP229 PIERCE-All "Perf-O-Mator" Models 3025A and 3025AT Piercing andNotching Machines: Detailed Operator's Instruction and Service Manual withParts Manual as exploded-component diagrams and Sectional Drawings.

MP229A PIERCE-All "Perf-O-Mator" Models 1825A-48/30, 2025A-48/30,3025A-48/30, 3025A-72/54, 3050A-104/80, 3025AT-48/30, 3025AT-72/54,4025AT-78/60. Piercing and Notching Machines: Parts Manual asexploded-component diagrams and Sectional Drawings.

MP229X PILOT 12-ton, 15-to and 20-ton Hydraulic Presses. Two Operating & Maintenance instructionswith Parts as Exploded Component Drawings and a wiring diagrams

MP229Y PILOT 3-Ton Hydraulic Bench Press Model No. 8. Operating and Maintenance Manual with Parts as Exploded Component Diagrams.

PINONDO Shapers - see SEBA below

MP230 PITTLER TURRET Lathes.Detailed Operating Hand book. 295 pages.

MP230A PITTLER Standard Tool Holders and Chucking Tools for Pittler TurretLathes. Detailed specifications with dimensions. 140 pages

MP230B PITTLER Cutting and Threading Tools for Pittler Multi-SpindleAutomatics. Detailed specifications with dimensions. 140 pages

MP230C PITTLER Standard Tool Holders and Clamping Arrangements Tools forPittler Multi-Spindle Automatics. Detailed specifications with dimensions. 140pages

MP230D PITTLER Pirex 50: Operator's Instruction and Maintenance Manual withSectional Drawings. Not a perfect copy.

MP230E PITTLER Pirex 80: Operator's Instruction and Maintenance Manual withSectional Drawings.

MP230F PITTLER RE-111-60 - Revolver - Drehbank. A remarkable Pittler capstanlathe with its turret disposed vertically between the bed ways. The maker'sworkshop Manual; profusely illustrated - German text.

MP230G PITTLER PRB 32/6 Operator's Manual with Electrical Schematics (availablewith GERMAN TEXT only).

MP230H PITTLER PRB 32/6 and PRB 50/4 Parts Manual as Exploded Component andSectional Drawings.

MP230J PITTLER PRC 32/8, 50/6 and 66/4 Operator's Manual (Available with GermanText only).

MP230K PITTLER PRC 32/8, 50/6 and 72/4 Operator's Manual. English Text.

MP230L PITTLER PRC 32/8, 50/6 and 66/4 Parts Manual as Exploded Component andSectional Drawings.

MP230M PITTLER PRC 66/4, 50/6 and 32/8 Operator's Instruction and ServiceManual (available with German Text only).

MP230P PITTLER PRC 72/4 (with 32/8 and 50/6) Parts Manual as Exploded Componentand Sectional Drawings.

MP230Q PITTLER Standard Tool Holders and Chucking Tools for Pittler Drum-TypeTurret Lathes. Detailed specifications with dimensions. 140 pages

MP230R PITTLER Pirette Automatic Turret Lathe. Operating Instructions withAdditional Equipment Operating Instructions and Maintenance Instructions.

MP230S PITTLER Pirette 100 and 130 Automatic Turret Lathes. StandardToolholders and Clamping Arrangements. Dimensioned Drawings.

MP230T PITTLER Pirette Automatic Turret Lathe 100. Electrical Diagrams. Longfold-out schematic over 48 pages annotated in English and German.

MP230U PITTLER NF200 lathe. Operating Instructions.

MP234 PLESSEY BR3100 Controller Programming Manual.

MP234A PLESSEY BR3100 Controller Programming Manual.

MP234B PLESSEY Autoset Type N410 Operator's Instruction, Programming andServicing Manual.

MP234C PLESSEY NC 1100 Engineering and Electrical Manual Vol. 1. Multipleelectrical schematics.

MP234D PLESSEY NC 1100 Operating and Programming Manual

MP234G HERBERT/PLESSEY BR 3100 System Controls. Operational Manual.

MP234H HERBERT/PLESSEY BR 3100 System Controls SERVICE Manual.

POLISH MACHINE TOOLS: look also under Zaklady, "MECHANICY","WAFUM", "JAFO JAROCIN", PONAR-KOMO, and RYCHOWSKA FABRYKAMASZYN and PONAR-WROCLAW

MP235/MT350 TUE-40 Lathe (Polish) Manual with wiring diagrams. US

POLLARD CORONA DRILLS: please note that the drills usually carry a clearidentification but, if not, they were brand ed as follows (send a photograph ifunsure):
Floor-standing models: 1-spindle = 15AX; 2-spindle = 15CX; 3-spindle = 15DX;4-spindle = 15EX; 6-spindle = 15LX; multiple adjustable spindles = 16MX
Bench models usually had a the letter F in the middle of the model type:1-spindle = 1FX, 15FX and 9FX; 2-spindle = 1CFX; 3-spindle = 1DFX; 4-spindle =1EFX; 6-spindle = 1LFX
Upright production drills all-geared head = Type 21A and 28A with 1 to 6columns on a single base

MP237 POLLARD "Corona" 1AX, 1CX, 1CFX, 1DX, 1DFX, 1EX, 1EFX, 1LX and1LFX Drilling Machines. Installation, Operator's Instruction, Maintenance and IllustratedParts Manual as Sectional Diagrams.

MP237A POLLARD "Corona" 6MX Drill and 6MXT Combined Drill and tappingmachine. Installation, Operator's Instruction, Maintenance and IllustratedParts Manual as Sectional Diagrams.

MP237B POLLARD "Corona" 9FX Precision Bench Drill. SimpleInstallation, Operator's Instruction, Maintenance Instructions and Parts as aSectional Drawing.

MP237BB POLLARD "Corona" 12MX & 12MXT Multi-spindle Drill.Installation, Operator's Instruction, Maintenance Instructions and Parts as aSectional Drawing.

MP237C POLLARD "Corona" 13AX and 13AY 13-inch Drilling Machines.Installation, Operator's Instruction, Maintenance and Illustrated Parts Manualas Sectional Diagrams.

MP237d POLLARD "Corona" 15-inch Drill Series: 15AX, 15AY, 15CX, 15CY,15DX, 15DY, 15EX, 15EY, 15LX, 15LY, 15FX, 15FY 15HA, 15HF, 15HC, 15HCF, 15HD,15HDF, 15HE, 15HEF, 15HL and 15HLF 15-inch Drilling Machines with head-mountedmotors. Installation, Operator's Instruction, Maintenance and Illustrated PartsManual as Sectional Diagrams.

MP237F POLLARD 20MH and 20MX Multi-spindle Drilling Machine. Operating Manual,Maintenance Manual and Parts Manual as Exploded Component Diagrams. Includesand electrical diagram and maker's Sales & Technical SpecificationCatalogue.

MP237G POLLARD 21A and 28A Production Drilling Machines. Instruction andMaintenance Manual with Parts Manual as Sectional Drawings.

MP237H POLLARD 31MX Multi-spindle Drilling Machine. Operating Manual, MaintenanceManual and Parts Manual as Exploded Component Diagrams.

MP237JJ POLLARD Series 100 Drill Models A and F (Bench and floor standing) withpoly-V drive to the head. Instruction and Maintenance Manual with Parts Manualas Sectional Drawings and Electrical Diagram. Includes a copy of the maker'scomprehensive sales and Technical specification catalogue.

MP237K POLLARD Series 130 Drills. Instruction and Maintenance Manual with PartsManual as Sectional Drawings and Electrical Diagram.

MP237L POLLARD Series 150 Drills. Instruction and Maintenance Manual with PartsManual as Sectional Drawings and Electrical Diagram.

MP237M POLLARD Tappers - Auto-reversing Types No. 1, 2, 4, 5 and 200.Operation, Maintenance and Spares Manual. Includes a copy of the maker'sdetailed Sales and Technical Specification Catalogue.

PONAR-KOMO machine Tools - see under "MECHANICY" above.

PONAR PRUSZKOW – milling machines. Manuals may be available. Please e-mail yourrequirements :tony@lathes.co.uk

MP238/MC370 PONAR-WROCLAW Lathe TUR63 (WAFUM TUR 63): Instruction andMaintenance Manual and Parts Manual as Sectional Drawings.

MP238B PONAR-WROCLAW COMPUTURN CNC-390 Lathe (also badged as Churchill).Comprehensive Operator's Instruction Manual with Parts as detailed sectionaldrawings.

MP239PNT PONTIGGIA (Leopoldo Pontiggia and LEPONT) "Nuvo SFE" LatheOperation and Maintenance Manual with an Electrical Schematic.

MP239Z POP RIVET Machine T.T.1A with Hydraulic Intensifier. Made by Geo. Tucker Eyelet Co. Ltd.Detailed Instruction Manual with Parts as Sectional Drawings. Gives full details of all rivet types and sizes and their particular use.

MP239 POREBA (FUM) Lathes TR-100B1, TR-135B1 and TR-100C1. Operating andMaintenance Instructions with Parts Manual as Sectional Drawings.

MP239A POREBA (FUM) Lathes Types TR45, TR55, TPK80, TPK90, TCG and TCE.Operator's Instruction and Maintenance Manual with Parts as large sectionaldrawings.

MP239B POREBA (FUM) Lathes Types TR70B and TR70C Operator's Instruction andMaintenance Manual with a Parts Manual as sectional drawings.

P475 PORTASS Lathes: no manuals were ever issued but this is an interestingcollection of (rare) Sales & Technical Specification Sheets, IndividualMachine Catalogues, Illustrations, Accessories and "Letters ofRecommendation". Covers, amongst others, the X.L., Mark V, Model X.Dreadnought (several versions including the 5-inch), Model S, Model 21/8",Model-de-Lux 21./8", Model Super, Heavy-duty 4-inch, Milling &Drilling Attachment, shapers, 4-inch wood lathe, etc. 70 sheets.

MP240 Posidata (Matchmaker) CNC 1800 Programming Manual and Instruction Manual.

MP240B Posidata (Matchmaker) CNC 2800 Service Manual with 20 electricalschematics.

MP240MD Posidata (Matchmaker) Powercentre 111 & Matchamaker Operator's Manual with Partsas Sectional and Exploded Component Drawings and Electrical Schematics.

MP240C Posidata (Matchmaker) TNC 151/155 Programming Course Notes.

MP242 POTISJE-ADA "TypePA" Lathe. Operation, Maintenance and Parts Manual as Sectional Drawingswith Electrical Schematic.

MP244 POTTER and JOHNSTON 3U SPEED-FLEX Automatic Turret Lathe. Operator'sInstruction Manual.

MP244A POTTER and JOHNSTON Power-Flex 5D, 5DE, 5DL, 5DEL, 5D-2-9",5D-2-12", 5DE-2-15" Manufacturing Automatic Lathes. Operator'sInstruction and Maintenance Manual.

MP244B POTTER and JOHNSTON 5D Automatic Lathe. Operator's Instruction Manual.

MP244C POTTER and JOHNSTON Manual of Production Tools for use on the Model 4UAutomatic Turret Lathe.

MP244D POTTER and JOHNSTON 6DRE-40 and 6DREL-40 Automatic Turret Lathes. Operator's Instruction and Adjustments Manual

MP249 POTTS: Blueprint to manufacture the Potts indexing, 6-station,tailstock-mounted tool holder. Universal fitting, adaptable to any lathe.

MP250 POWERMATIC (Burke/Millrite) Miller. Maintenance Manual and IllustratedParts Manual.

POWER VANE Compressors - see under "Broomwade"

PRECIMAX - see under Lund and Landis-Lund above

MP250A/MB800 BURKE (Millrite/Powermatic) Vertical Turret Miller. IncludesStandard and variable-speed models. Operator's Instruction and MaintenanceManual with Parts as Exploded Component Drawings. Includes ElectricalSchematics.

MP250B/MM330A POWERMATIC (MILLRITE/Burke) No. 4 Horizontal Miller. MaintenanceManual and Illustrated Parts Manual (Army Edition).

MP250C POWERMATIC 12-inch BENCH LATHE. Operator's, Maintenance and Spare PartsManual as Exploded Assembly Diagrams.

MP250D POWERMATIC (and Burke) Woodturning Lathe Model 45. variable-speed andDirect-drive models. Operating Manual and Parts Manual as Exploded ComponentDiagrams.

MP250E POWERMATIC Model 143 14-inch Combination Band Saw. OperatingInstructions and Parts List.

MP251 PR-50R.Type R Capstan Lathe. Essential Maintenance and Adjustment Guide.

MP252 PRAEHOMA SURFACE GRINDER: RW8, RW9 and RW10: Operator's InstructionManual Including Electrical and Hydraulic Schematics.

MP254 PRAGA Surface Grinder 451 Operator's Instruction and Maintenance Manualwith Electrical Diagrams (this machine is a copy of the Jones and Shipman 540).

MP254A PRAGA Surface Grinder 451 Parts Manual as Exploded Component Drawings(this machine is a copy of the Jones and Shipman 540).

MP254B PRAGA Surface Grinder 452. Parts Manual as Exploded Component Drawings.

MP254C PRAGA Model-137 Box Column Drilling Machine. Operation & Maintenance Manual.

MP254D PRAGA (Praga-Gambin) Model10N Universal Milling. Operation & Maintenance Manual.

MP260 PRATT and WHITNEY Lathe12" X 30" Model B. Operator's Instruction Book" (only 26 pagesbut very useful detailed information) .

MP260A PRATT and WHITNEY Model B 20"Lathe. Operator's Instruction Manual.

MP260B PRATT and WHITNEY Model B 20" Lathe: Repair Parts List withSectional and 3D Drawings.

MP260C PRATT and WHITNEY Model C 12-inch Screwcutting Engine Lathe Operator'sInstruction Manual.

MP260C4 PRATT and WHITNEY Model C 14-inch Screwcutting Engine Lathe Operator'sInstruction Manual.

MP26OD PRATT and WHITNEY Model C Lathe: Relieving Attachment: Instructions andcomprehensive gear charts.

MP262 PRATT and WHITNEY Keller BL Automatic Tracer-controlled Milling machine.Operating and Maintenance Manual.

MP262A PRATT and WHITNEY Keller BL Automatic Tracer-controlled Milling machine.Parts Manual as Sectional Drawings.

MP262B PRATT and WHITNEY Keller BG-21 Automatic Tracer-controlled Millingmachine. Comprehensive Operating and Maintenance Manual with ElectricalSchematics.

MP262C PRATT and WHITNEY Keller BG-21 Automatic Tracer-controlled MillingMachine. Parts Manual as Sectional Drawings.

MP264 PRATT and WHITNEY 10-inch Hydraulic Gear Grinder. Manual, Maintenance,Operator's Instruction and detailed Illustrated Parts Manual with AssemblyDrawings and Annotated Photographs.

MP265 PRATT and WHITNEY No. 3C Universal Precision Bench Miller. InstructionBook with Tables of Leads and wiring diagram.

MP266 PRATT and WHITNEY 2A Jig Borer. Operator's Instruction Book. Includes acopy of the Maker's detailed Technical Sales and Specification Catalog.

MP266P PRATT and WHITNEY 2A Jig Borer. Repair Parts Manual.

MP266A PRATT and WHITNEY 2B Jig Borer. Operator's Instruction Book.

MP266RT PRATT and WHITNEY Jig Borer Tilting Rotary Table. Operator'sInstruction Book.

MP267 PRATT and WHITNEY 4.5" Thread Miller Model C. Operator's InstructionBook.

MP267A PRATT and WHITNEY 6" Thread Miller Model C. Operator's InstructionBook and Parts Manual (Repair Parts) as Sectional and Annotated Drawings.

MP268 Pratt and Whitney TAPE-O-MATIC Drilling Machine Model A. Full Data Packincluding: Operator's Manual, Electronic Manual, Trouble-Shooting Guide, 2Editions of the Elementary and Logic Wiring Diagrams and the Quantizer EmitterFollower and Block Fitting Instructions.

MP269 Pratt and Whitney Model B 14-inch vertical Surface Grinder. Operator'sInstruction and Maintenance Manual.

MP270 PRAZIMA Watchmaker's lathes Types Z1, Z2, Z3, Z4 and Z5. Operation Manual(4 pages) and Catalogue (6 pages)

MP680 PRAZIMAT DLZ 180 x 450 Lathe. Instruction and Maintenance Manual andParts as Exploded Component Drawings and a Wiring Diagram.

MP682 Precisionair Column Instruments by M.P.J.Gauge and Tool Co. (under licience from the The Sheffield Corporation of Dayton, USA) Operation & Service Manual. Includesa copy of the maker's detailed, 24-page Sales and Technical Specification Catalogue for the 900 Series with much additional information, explanations, reproduction of scales,tubing, connectors, parts, jet sizes, standard and carbide spindles, master rings, master setting duscs, standard, adjustable and fixed Airsnaps, flatness gauges, calibration, Airtest Indicators and Illustrated Parts Lists, etc.

"PRECISION GEAR MACHINES and Tools Ltd." - see under RED-RING below

MP685 PROJECTORSCOPE Models 2 and 4 (by Precision Grinding Ltd) Two Operator'sInstruction Manuals with copies of the maker's Sales & TechnicalSpecification Catalogues.

"PRECISION GRINDING Ltd." - See Under Alexander

MP685 PRECISONLAP Camberley. Twin-Wheel 400 Lapping Machine. Operator'sInstruction and Maintenance Manual with a separate manual on the General Rulesof Practice" for lapping.

MP687/MV199 PREMO Lathe (also badged as the VEEM Mk. 3) (Australia).Instruction Manual. Slender but useful publication. Includes a copy of themaker's catalogue.

MP690 PREMA SHAPING MACHINES Nos. 03 and 04. Operating Manual and Parts Manualas Detailed Sectional Drawings. Includes detailed Instructions for the AssayLubricator. The operating instructions also apply to the smaller Prema shapers.Includes a copy of the No. 04 19-inch shaper (8 page) Catalogue.

MP692 P & S (Press & Shear Machinery) MR50/10 & MR80/10 MechanicalGuillotines. Operating Instructions.

MP693 PRINCE Crankshaft Grinding Machines. Detailed and Practical Operation, Maintenance and Installation Manual. Includes an Electrical Schematic, many useful sectional drawings and lots of practical, hands-on hints and tips for getting the best from the machine.

MP694 PROBEND Folding Machines.Operator's Instruction Instructions.

MP700 PROGRESS DRILLS: Also - see the ELLIOTT SECTION above.

MP700A/ME613E PROGRESS (ELLIOTT/Victoria) 3E, 4E and 5E Heavy-duty geared-headDrills. Operating and Maintenance Manual with Illustrated Spares. Includescopies of all the appropriate Technical Sales and Specification Catalogues.

MP700B/ME61A PROGRESS (ELLIOTT/Victoria) Models "1" and"1S" Bench and floor standing Drills. Operating and MaintenanceManual and Illustrated Spares.

MP700C/ME61B PROGRESS (ELLIOTT/Victoria) "2G" and "2GS"Bench and floor standing Drilling Machines with reduction gearing in head.Operating and Maintenance Manual, Wiring Diagrams, Illustrated Spares Lists anda copy of the maker's detailed Sales and Specification Catalogue.

MP700D PROGRESS 3A Drill Operator's Instruction Manual and Parts manual asExploded Component Drawings.

MP703 PROJECTORSCOPE 10/250 (by Precision Grinding) Instruction Manual

MP705 PROMACH "Promill" PK-1 1/2 GRM KV Turret milling machine(Bridgeport copy). Operation, Maintenance and a Parts Manual as ExplodedComponent Drawings.

MP710 Promecam BRG-3100 Series 125 Hydraulic Shear. Operator's Instruction andMaintenance Manual with an electrical schematic and a copy of the maker'sdetailed 6-page sales & Technical Specification Catalogue.

MP710A PROMECAM RG Press Brake Type 2 Models 103 and 104. Operator'sInstruction and Maintenance Manual with Electrical and Hydraulic Schematics andParts Manual as Sectional Drawings. Includes a copy of the comprehensivePromecam Tooling Catalogue with many examples of set-ups, the tools requiredand how to mount them effectively.

MP710B PROMECAM RG Press Brake Type 2 Models 25-12 to 35-25. Operator'sInstruction and Maintenance Manual with Electrical and Hydraulic Schematics andParts Manual as Sectional Drawings. Includes a copy of the comprehensivePromecam Tooling Catalogue with many examples of set-ups, the tools requiredand how to mount them effectively.

MP710C PROMECAM RG Press Brake Types RG35, RG135 and TG110. Operator'sInstruction and Maintenance Manual. Includes a copy of the comprehensivePromecam Tooling Catalogue with many examples of set-ups, the tools requiredand how to mount them effectively.

MP710D PROMECAM RG3 Press Brake (may be badged Barker Perkins) Instructions forOperator's Instruction and Maintenance including Parts as useful SectionalDrawings.

MP710E PROMECAM HC Hydraulic Bending Rolls. Instruction Manual. English andFrench Text.

MP710F PROMECAM Press Type 3 (Manuel d'installation des Presses Type 3).Installation Instructions. FRENCH TEXT.

MP710G PROMECAM Brake Press Type 25-12-B Operation and Maintenance Manual with Parts Manual as clear Exploded-component Drawings.

MP710H PROMECAM Brake Press Type RG-2000-50 Operation and Maintenance Manual with Hydraulic Schematic.

MP715 PROSAW STG-320-DGH Horizontal Band saw. Detailed Operating andMaintenance Instructions with Electrical Circuit Diagrams.

MP715A PROSAW UE250 & UE250SSA Horizontal Band saw. Operating andMaintenance Instructions with Parts as Exploded Component Drawings and anElectrical Circuit Diagram.

MP720/MS1 PROXXON (Toyo, Sakai) ML360 Lathe Instruction & MaintenanceManual and Exploded Assembly Diagrams Parts Manual.

MP721/MS2 PROXXON (Toyo, Sakai) ML210 Lathe & Milling Head. InstructionManual with a Parts Manual as useful Exploded Assembly Diagrams and acomprehensive Sales, Specification & Accessories Catalogue. Included aredetails of how to use the full range of accessories.

MP721A PROXXON PD40 Lathe. Instruction & Maintenance Manual and ExplodedDiagrams Parts Manual. English, French, German, Italian, Spanish, Dutch,Danish, Swedish, Cesky and Turkish text

MP750 PRVOMAJSKA ALG-100 Miller Universal Precision (Deckel) Type (also coversthe 100B, 100C, 100E etc). Operating and Maintenance Manual together with threecopies of the detailed and well-illustrated Sales, Specification andAccessories Catalogues.

MP750A PRVOMAJSKA G-01B and G-01V "knee-type" Milling Machines.Operator's Instruction and Maintenance Manual.

MP350B PRVOMAJSKA G-301 Vertical Ram-type Milling machines. Parts manual asSectional Drawings.

MP750c PRVOMAJSKA G-301A & G-301D Vertical Ram-type Milling machine withUniversal Swivelling heads. Operation & Maintenance Manual with ElectricalSchematics and Parts Manual as detailed Sectional Drawings. Includes sectionsdealing with "Extra Equipment" including power feed to table; riserblock; moveable stops for long and cross feeds; measuring attachments forfeeds; vertical movable stop & rule for head quill and dial indicatorsupport; profiling attachment; optical measuring systems for long and crossfeeds; dividing heads and equipment; rotary table with dividing attachment& direct and indirect indexing instructions; angle adjusting device &tailstock for rotary table; right-angle attachments & arbor support;adjustable angle attachment; milling head Types BN & BB with self-containedmotor drive; vertical shaping head.

MP750D PRVOMAJSKA G-301-D1A Vertical Ram-type Milling machines. Two electricalSchematics.

MP750E PRVOMAJSKA TNP 160A & TNP 200A Lathes. Operating and LubricationInstructions with comprehensive screwcutting charts and Electrical Diagrams.

MP770 PUCKERT Pneumatic Bar Feed. Operating and Maintenance Manual withassorted set-up drawings and diagrams. Two editions are included.

MP790 PULLMAX Universal Plate Worker: Two very Detailed Technical Sales andSpecification Catalogues. Not a manual but very useful in understanding how aPullmax works with straightforward descriptions of the various processes andcontains clear descriptions of how the machine is used for: cutting, nibbling,slotting, 4-way cutting, louvring, punching, beading, joggling, edge bending,flanging, lock-forming, doming and the use of straight-cutting, circle cutting,spiral cutting, outer-circle cutting and power-feed attachments. Includes acopy of the very useful and detailed publication "Demonstrating a Pullmax"- a useful guide to every Pullmax operation.

MP790A PULLMAX Major 2. A complete data pack consisting of the Operator'sInstruction Manual, a copy of the very useful publication (obviouslyhand-written within the factory) "Demonstrating a Pullmax" - a usefulguide to every Pullmax operation - and the detailed Sales & SpecificationCatalogues that also gives detailed accounts of how the machine is used on avariety of jobs.

MP790C PULLMAX P5 Universal Plate Worker - older model. Operating Manual.Includes a copy of the very useful and detailed book "Demonstrating aPullmax" - a useful guide to every Pullmax operation.

MP790D PULLMAX P3 and P5 Universal Plate Workers Newer Models. A complete datapack consisting of the Operator's Instruction Manual, a copy of the very usefulpublication (obviously hand-written within the factory) "Demonstrating aPullmax" - a useful guide to every Pullmax operation - and the detailedSales & Specification Catalogues that also gives detailed accounts of howthe machine is used on a variety of jobs.

MP790P6 Pullmax P6 Universal Plate Worker. A complete data packconsisting of the Operator's Instruction and Parts Manual, a copy of the very usefulpublication (obviously hand-written within the factory) "Demonstrating aPullmax" - a useful guide to every Pullmax operation - and the detailedSales & Specification Catalogues that also gives detailed accounts of howthe machine is used on a variety of jobs.

MP790E PULLMAX P7 and P8 Universal Plate Worker. A complete data packconsisting of the Operator's Instruction Manual, a copy of the very usefulpublication (obviously hand-written within the factory) "Demonstrating aPullmax" - a useful guide to every Pullmax operation - and the detailedSales & Specification Catalogues that also gives detailed accounts of howthe machine is used on a variety of jobs.

MP790F PULLMAX P9 Universal Plate Worker. A complete data pack consisting ofthe Operator's Instruction Manual, a copy of the very useful publication(obviously hand-written within the factory) "Demonstrating a Pullmax"- a useful guide to every Pullmax operation - and the detailed Sales & SpecificationCatalogues that also gives detailed accounts of how the machine is used on avariety of jobs.

MP790G PULLMAX P21 Universal Plate Worker. A complete data pack consisting ofthe Operator's Instruction Manual, Parts Manual as Sectional Drawings, a copyof the very useful publication (obviously hand-written within the factory)"Demonstrating a Pullmax" - a useful guide to every Pullmax operation- and the detailed Sales & Specification Catalogues that also givesdetailed accounts of how the machine is used on a variety of jobs.

MP790HH PULLMAX X91 Bevelling Machine. Instruction and Parts Manual withadjustment and lubrication guides. Includes an electrical diagram.

MP790JJ Pullmax X8 Bevelling Machine, Model B - Operator's Manual and Parts Listas exploded component diagrams.

MP790KK Pullmax 3015NC a computer-controlled punching and nibbling machine.Large Operation and Maintenance Manual

MP790J Pullmax (SMT-PULLMAX) Swedturn 6 CNC lathe. Detailed Operation Manualwith Parts Manual as sectional drawings.

MP790K Pullmax (SMT-PULLMAX) Swedturn 10 and Swedturn 14 CNC200 Lathes. Hugeand Detailed Operation, Maintenance and Parts Manual as sectional drawings withElectrical Schematics.

PULTRA Lathes: a 211-page all-models' Operation & Maintenance Manual withSpare Parts as Sectional Drawings covering both early open-headstock P-Type andlater 1750, 1770 and 1790 Models and their Drive Systems including the"Mardrive" type. A pair of beautifully-produced, full-rangecatalogues showing all the P-Type, 1750, 1770 & 1790 models and accessoriesincluding the Pultra Grinding and Milling Attachments Catalogue (a rareedition). For the Pultra "D" bed watchmakers' lathes there are twosets of Exploded Component and Sectional Drawings showing two versions of thelathe and a Catalogue for the Pultra 10 watchmakers' lathe. This high-qualitypackage contains almost every (non-duplicated) Pultra publication issued by thefactory.

MP800 PULTRA Lathes: All-models' Operator's Instruction and Maintenance Manual. (see below for comprehensive collection of literature).

MP800A PULTRA Lathes: Spare Parts as Sectional Drawings covering both earlyopen-headstock and later 1750 and 1770 Models and their Drive Systems includingthe "Mardrive" type.

MP800B PULTRA Micro Lathes: if you have an early Pultra a good companion to theabove Manual is a pair of beautifully-produced full-range catalogues showingall the models and accessories (both open and Closed headstock versions).

MP800C PULTRA Micro Lathes: Pultra Grinding and Milling Attachments Catalogue(not a Manual) - very rare edition.

MP800D All the above Pultra literature (which represents a carefully-chosen andcomplete Data Pack to give all the information required to understand and usethese fine lathes) 194 pages:

MP950 PURCELL (South Bend Copy). By far the best Manual for this lathe is theone produced by Denford Tools for the original Boxford lathe. A few mechanicaldetails are different but the operating procedures are identical. It contains acomplete 160-page set of information for all models of belt-drive Boxford lathefrom the earliest to the last made. Contains the larger and far-better earlymanual with clearer pictures and drawings together with additional sections andcharts added not included in the original including, for example, how togenerate pitches not shown on the screwcutting gearbox and what pitches thelever positions indicate, a full list of standard and extra changewheels anddata on metric to inch and inch to metric screwcutting.

MP950A PURCELL "New Visby" 17-26 lathe. Operator's Instruction andMaintenance Manual with Electrical Schematic and Headstock shown as ExplodedComponent Parts. Includes a copy of the maker's detailed and well illustrated Sales,Specification Catalogue.

Due to interest in Purcell and New Visby lathes (and a lack of technical data)the following catalogue collection has been put together
P900 PURCELL Comprehensive Catalogue Collection covering the: Visby, New Visbyin M. 1, Mk. 2 and Mk. 3 types, the "Record", Conehead (andgeared-head versions), Heavy-duty 10.5 and 12.5 industrial lathes and the4.5" South Bend Clone. 56 pages.

MQ1 QUALITY MEASUREMENT SYSTEMS Digital Readout System including Alpha 500Readerhead: Operator's Instruction and Maintenance Manual

MQ2 QUALTERS and SMITH QDM 23 DRILL: SERVICE Manual.

MQ2A QUALTERS and SMITH QDM 32 DRILL: SERVICE MANUAL and Parts Manual.

MQ2B Qualters and Smith QDM-500, QDM-625 and QDM-750 Drillmaster: InstructionManual and Parts Manual as Sectional Drawings.

MQ2C Qualters and Smith QDM-1000 Drillmaster: Instruction Manual and PartsManual as Sectional Drawings.

MQ2D Qualters and Smith QDM-1250 Drillmaster: Instruction Manual and PartsManual as Sectional Drawings.

MQ2E/MR182A Qualters & Smith (actually RICHMOND) SR2 Radial Arm DrillingMachine. Operator's Instruction and Maintenance Manual with Parts Manual asExploded Component Drawings and Wiring Schematic.

MQ2F Qualters and Smith (and Kerry-branded) QSR2, QSR-3, QSR-4, QSR-3E, E3, E4.Radial-arm Drills all types both rise-and-fall arm and rise-and-fall tables. Acomplete Data Pack for all versions and brandings with Instruction Manuals,Parts Manuals as Sectional Drawings and Electrical Schematics. This is a large,4-edition publication covering all versions from first to last and includes aset of Sales & Specification Catalogues.

MQ4 Qualters and Smith 150,150-Terrier, 200-Terrier, 150-Bulldog and 200-Bulldog Hacksaws (also covers thelarger Model 250). Complete set of Instruction Manuals with Parts andElectrical Schematics (or single and two-speed motors) that covers all versionsof these saws.

MQ4A Qualters and Smith 6" and 8" Hacksaw (early models). InstructionManuals (combined) with Parts Manual as Sectional Drawings.

MQ4B Qualters and Smith SAWMASTER hacksaws Models: QSH-6, HDS-6, HDS-8, HDS-10,(6", 8", 10" and 12") Mk.1 and Mk. 2 (distinctiverounded-top heavy cast-iron overarm). All-models Instruction Manual with PartsManual as Sectional Drawings and Electrical Schematics.

MQ4C Qualters and Smith 6B Autocut Band SAW. Instruction and Service Manualwith Spare Parts Manual as Sectional Drawings and Electrical Schematic.

MQ5A Qualters and Smith 6W Band SAW. Instruction and Service Manual with SpareParts Manual as Sectional Drawings and Electrical Schematic.

MQ5B Qualters and Smith QSB-7 and QSB-7A Band SAWS. Instruction and ServiceManual with Spare Parts Manual as Sectional Drawings and Electrical Schematic.

MQ5C Qualters and Smith QSB-7B Band SAW. Instruction and Service Manual withSpare Parts Manual as Sectional Drawings and Electrical Schematic.

MQ4D Qualters and Smith 10B Standard, 10B Autocut and A/180, QSB10 and QSB10AHorizontal bandsaw. Instruction and Service Manuals and Spare Parts Manual asSectional Drawings (2 manuals in the set covering all versions). Includeselectrical diagrams and hydraulic conduits layout (not a hydraulic diagram).

MQ5F Qualters and Smith 12A and 12B Band SAW. Electrical Blueprints.

MQ5G Qualters and Smith 12A Band SAW. Instruction and Service Manual with SpareParts Manual as Sectional Drawings and Electrical Schematics.

MQ5H Qualters and Smith 150 Band SAW: Spare Parts Manual as Sectional Drawingsand Electrical Schematics.

MQ5J Qualters and Smith 180, 180A, 260 and 260A Band SAWS. Instruction andService Manual with Spare Parts Manual as Sectional Drawings and ElectricalSchematics (pc).

MQ5K Qualters and Smith 350 and 350A Band SAWS. Instruction and Service Manualwith Spare Parts Manual as Sectional Drawings and Electrical Schematics forboth Standard and Automatic. (pc)

For other QUALTERS and SMITH DRILLS and LATHES etc. check the KERRY sectionabove; the Kerry name was used interchangeably with Qualters and Smith on manymodels.

MQ20 QUASI-ARC = see under BOC (British Oxygen Company) above.

MQ50 QUORN Tool and Cutter Grinder. Detailed operating Instructions.

MQ100 DENFORD (Heidenhain 355) Operator's Instruction and Service Manual.

MR3 Radiovisor Photo-Electric Press Guard Type PG28. Installation, Operating& Adjustment Instructions with electrical schematic.

MR3A Radiovisor Photo-Electric Press Guard Type PG210 Vertical and Universal.Installation, Operating & Adjustment Instructions with electricalschematic.

MR5 RABOMA Radial Drill Model 12-U-1000: Instruction and Maintenance Book. BothEnglish and German text.

MR5A RABOMA Radial Drills. General Instructions & Maintenance Instructions.English and text.

MR8 RADYNE W3 and W5 High-frequency Welder for Thermoplastic Materials. Operation Manual.

MR8A RADYNE Model R3/400 30kW Induction Heater. Instruction Manual.

MR10 "RC-10 BF" Miller. Instruction Manual and MaintenanceInformation.

MR15 RAGLAN "Little John" Mk.1 & Mk. 2. A complete data packconsisting of the Operator's Handbooks, Illustrated Parts Manuals, AccessoriesLists and a wiring diagram for both Dewhurst and Stanton switches. There arethree Manuals in the set: the first for the Mk.1 (a publication with limitedthough interesting technical data - including the correct screwcutting chartfor the Mk. 1) and two editions (one early, one late with complimentaryinformation) for the Mk. 2 as well as illustrated Parts Lists. Three Sales andAccessories Catalogues are also included (showing all versions of the lathe andevery accessory ever offered) together with the lathes.co.uk article about thelathes and their development.

MR15B RAGLAN "5-INCH" Lathe (The later Raglan with a smooth,rounded-edge headstock cover). Operator's Manual, Illustrated Parts Manual.Includes Sales and Specification and Accessories Catalogues and SpecialScrewcutting Supplement. This lathe can be seen here

MR15C Raglan Loughborough Training Lathe. Instruction Manual and a Parts Manualas Sectional Drawings togther with a copy of the Maker's Sales Catalogue. .This lathe can be seen here

MR15D RAGLAN Capstan Lathe. Operator's Manual with Parts as Sectional Drawings.

MR15C RAGLAN Vertical Miller. Basic Hand book with some dimensioned PartsDrawings and a detailed Sectional drawing through the machine.

MR17 RAIMANN Automatic Wood Knot Boring and Plugging Machine. DetailedOperating Instructions.

MR20 RAMBAUDI M-Series Milling Machines Types M including: M3, MG3, MS3, M3-P,MG3-P, MS3-P and MO. These models all used the same basic column knee and tableassembly but were fitted with either the NV3 or V3 heads and made inhorizontal, vertical and ram-head forms. An Operator's Instruction andMaintenance Manual and Parts Manual is available for the M3P and MS3 versionsthat covers the essentials of the other models as well. This manual is not thebest of reproductions - but is readable and includes a Sales &Specification Catalogue.

MR20B RAMBAUDI "RAM" vertical Miller. Operator's Instruction andMaintenance Manual with Parts Manual as large fold-out Sectional Drawings.Includes Electrical Schematics (pc).

MR20C RAMBAUDI UR60 and UR60-U vertical Miller. Operator's Instruction andMaintenance Manual with Parts Manual as large fold-out Sectional Drawings.Includes Electrical Schematics (pc).

MR20D RAMBAUDI V2, VR2, VRG2 and VSR2 Ram-type Vertical Milling Machines:Operation Instructions & Spares Parts List with Electrical Schematic andSchlesinger Test Chart for the V2. Includes two editions: one marked for theVR2 the other for the VR2, VRG2 and VSR2.

MR20E RAMBAUDI VR3 Ram-type Vertical Milling Machines: Instruction Book andParts Manual as Sectional Drawings.

MR20F RAMBAUDI VERSAMIL 12: Operator's Instruction and Maintenance Manual withParts Manual as fold-out Sectional Drawings. Includes a copy of the detailedand well illustrated Sales, Technical Specification & AccessoriesCatalogue. (pc).

MR20G RAMBAUDI FVR Vertical Milling Machine. Instruction Book with basicadjustments and a Parts Manual as Sectional Drawings.

MR20H RAMBAUDI Rammatic 1000E NC Milling Machine. Operation and MaintenanceManual including Installation, Lubrication, Controls, Accessories, etc.

MJ60 Randa Miniature Clockmaker's Lathe. Operating Manual with Parts Manual asSectional Drawings. Also sold with Jason, "Pixi", Sartglen &Randa Badges. click here for pictures.

RANK Precision Industries - See under TAYLOR HOBSON

MR30 RAPIDOR Hacksaws Spare Parts Manual as Drawings. Includes 16 individual Salesand Specification catalogues from the 1920 to the 1970s showing virtually theentire range of the company's regular models, 6", 8", 10",12", 14", 16" 20", etc., a number of special typesincluding saw sharpening machines, girder saws, tyre saws (railway wheels),portable units, jig saws and filing machines, rail saws, angle plates, screwpacking steel side cramps, machine vices, etc. and representing the completeknown data set for this manufacturer. 64 pages.

MR30X RASKIN Presses: Rigid Model Comprehensive Operator's Instructions withmany sectional and other drawings.

MR32 RAVENSBURG K600KHF Facing Lathe. Operating Instructions with ElectricalSchematics and Foundation Plans.

MR32A RAVENSBURG S1500 Slotting Machine. Detailed Operating Instructions.Originally bound in two volumes with a number of large A2 inserts. IncludesMaintenance details for the Binder, ZF and Ortlinghuase clutches; Delimon,WillyVogel and Hawe pumps, etc.

MR32B RAVENSBURG S1500 Slotting Machine. Full Electrical Manual with 21+ largewiring diagrams and multiple Heidenhain and Siemens Instruction Manuals. .An original, ex-works copy of this manual may be available.

MR32C RAVENSBURG S500 Vertical Miller: Bedienungsanleitung zurSenkrecht-Stobmaschine. Operation Instructions. German Text

MR35 "RB" S-211X Steam Cleaning Plant. Operating and MaintenanceInstructions.

MR45 REAVELL COMPRESSORS (All models) Lubrication Guide with useful sectionaldrawings.

MR50 Rebmann "Boy" lathe. Operation & Maintenance manual. GERMANTEXT.

MR58 RECORD Wood Lathes: Model CLOOperator's Instruction Manual and Illustrated Parts Manual with maker'scomprehensive Sales and Specification and Accessories Catalogue (also sold asthe Coronet No.0).

MC400B Record (and Coronet) Woodturning lathes No. 1, 2, 3 (twin bar-bed stylein various configurations) Operator's instructions with Sales and SpecificationCatalogue. Also marketed as the RECORD CL1, CL2, CL3, etc. A completecompendium of instructions and Sales & Accessories Catalogues coveringthese machines.

**************************** MR400B-CAM Record Wood lathes CL3-CAM (5-speed)and CL4-CAM (Electronically variable speed) Operator's Instruction, Maintenanceand Parts Manual.

MR58C RECORD Wood Lathe: Model CL4 Variable-speed Drive. Operator's InstructionManual and Illustrated Parts Manual with maker's comprehensive Sales andSpecification and Accessories Catalogue.

MR58K RECORD CL3 lathe (late model) with swivelling headstock. Assembly, Instruction, Maintenance and Parts Manual.

MR58D RECORD Wood Lathes: Model marked "DML" and "DML/SW".Operator's Instruction Manual and Illustrated Parts Manual with maker'scomprehensive Sales and Specification and Accessories Catalogue.

MR58DH RECORD Wood Lathes: Models DML24X & DML36SH (Swivel-head, 4-speed).Operator's Instruction Manual and Illustrated Parts Manual with maker'scomprehensive Sales and Specification and Accessories Catalogue.

MR58D18 DML18-SH Swivel-headwood-turning lathe. Operator's Instruction and Assembly Manual and IllustratedParts Manual.

MR58RPMLRecord RPML-300lathe Operator's Instruction and Assembly Manual and Illustrated PartsManual.

MR58E Record DML305 6-speed lathe.Operator's Instruction and Assembly Manual and Illustrated Parts Manual withmaker's comprehensive Sales and Specification and Accessories Catalogue.

MR58EV Record DML305-VSElectronically Variable-speed lathe. Operator's Instruction and Assembly Manualand Illustrated Parts Manual.

MR58F Record DML36SH-CAM Swivel head 4-speed lathe (sometimes marked"DMLBR). Instruction and Assembly Manual and Illustrated Parts Manual withmaker's comprehensive Sales and Specification and Accessories Catalogue.

MR58G Record MAXI-1 Vari-speed Swivel-head lathe. Operator's Instruction Manualand Illustrated Parts Manual with maker's comprehensive Sales and Specificationand Accessories Catalogue.

MR58HL Record MAXI-2 Vari-speed Swivel-head lathe with bowl-turning attachment.Operator's Instruction Manual and Illustrated Parts Manual with maker'scomprehensive Sales and Specification and Accessories Catalogue.

MR58ET RECORD (Toyo ) ML360 Lathe and Milling Head. Instruction Manual andParts Manual as useful Exploded Assembly Diagram and a comprehensive Sales,Specification & Accessories Catalogue. Included are details of how to usethe full range of accessories.

MT58FT RECORD (Toyo) ML210 Lathe & Milling Head. Instruction Manual with aParts Manual as useful Exploded Assembly Diagrams and a comprehensive Sales,Specification & Accessories Catalogue. Included are details of how to usethe full range of accessories.

MR58G RECORD 301S Vertical Bandsaw Detailed Instruction Manual and ExplodedAssembly Diagrams Parts Manual.

MR58H RECORD BK3 Band saw. Instruction Manual.

MB915B RECORD BK3 and BK3 Plus (actually a re-badged BURGESS) Bandsaw Manual

MR58J RECORD RP3000 Power Chuck. Instruction Manual.

MR59 RECORD (Italy) Tappers M15, M25 and M35 with Electro-pneumatic operation.Parts Manual as Sectional Drawings and Electrical Schematic.

RED-RING Gear Machines - also sold under the LEES-BRADNER and PRECISION GEARMACHINES and TOOLS brand s

MR60 RED-RING 5-AC Gear generator: Operating Instructions and FormulaeBooklet.

MR60A RED-RING 7-HD Gear Hobbing Machine: Operating Instructions.

MR60B RED-RING G.H.D. GEAR HONER: Operator's Instruction and Maintenance Manualand Parts as Sectional Drawings.

MR60C RED-RING G.C.U. Gear Shaving Machine. Operator's Instruction andMaintenance Manual with Parts as Sectional Drawings. Late, fully-revisedEdition

MR60D RED-RING G.C.I. 8", 12" and 18" Gear Finishing Machine.Operator's Manual with useful sectional drawings.

MR60E RED-RING G.C.P. 24" Traduzione Libro Istruzione Sbarbatrice GCP24" (Operator's Manual and Parts), Italian text.

MR60F RED-RING PGC Gear Chamfering and deburring machine. Operator's Manual andService Instructions with Parts as Sectional Drawings.

MR60G RED-RING PGM-Staehely SH200 Gear Hobbing Machine. Operator'sInstructions.

M^60H RED-RING SF-900 CBC Gear Grinder. Maintenance Manual with Parts asSectional Drawings.

MR60J RED-RING TRP-12" Tooth Rounder and Pointer. Operator's Manual andService Parts as Exploded Component Drawings.

MR60Z RED-RING. "Modern Methods of Gear Manufacture" ComprehensiveTextbook that explains design, calculations, materials, machining, forming,finishing, inspection and specialised machinery.

MR62 REED-PRENTICE (Black Rock) 14 and 16-inch Geared-head Engine and Toolroomlathes. Instruction Manual and super Parts Manual as Sectional Drawings.

MR62A REED-PRENTICE 22-V Vertical Miller and 22-VS Vertical Miller. Instructionand Maintenance Book with Parts as Sectional Drawings.

MR63 REED A-22 Cylindrical Die Thread Rolling Machine Parts List.

REGAL Lathes - See Under LeBlond above

MR63A REGLUS Precision Drilling Machine (Universal-Bohrvorrichtung) . Operation Manual in English, French and German.

MR64 Reichenbacher RANC Operating and Programmings Instructions for CNCWoodworking Routers.

MR65 REICHERTER (Georg Reicherter) BRIRO AUTOMAT Rockwell Hardness Tester.Instruction Book (in English and German).

MR70 REIDEN Lathe R-200 (2). Operating and Servicing Manual with usefulSectional drawings and Electrical Schematic. Includes a copy of the maker'sSales and Specification and Accessories Catalogue.

MR70A REIDEN Miller HF-20 and HF-30. Horizontal Miller. Operating and ServicingManual. Includes a copy of the maker's Sales and Specification and AccessoriesCatalogue.

MR70B REIDEN Miller VF-20 and VF-30. Vertical Miller. Operating and ServicingManual. Includes a copy of the maker's Sales and Specification and AccessoriesCatalogue. Both English and German Text.

MR70C REIDEN Miller FU-100. Operating and Servicing Manual with a copy of themaker's Sales and Technical Specification Catalogue and some useful sectionaldrawings.

MR80 REINECKER Universal Gear Milling Machines, Splined Shaft and pinionMilling Machines and Screw Spindle Milling Machines: Operating Instructions.English Text.

MR81 REIS Trimming Presses SEP-24 and SEP-26 Operating Instructions withElectrical Schematics

MR82 REISHAUER NZA Gear Grinding Machine. Operating Manual with Parts Manual asSectional Drawings.

MR85 RELIANCE " Drill Grinding Jig" and "Drill GrindingMachine" (a self-contained unit based on a double-ended grinder): Threesets of Operating Instructions (10 pages) combined in one publication.

RELIANT Folding machines and other sheet-metal machinery - see under MorganRushworth.

REMEX - see under Ex-Cell-O

MR90 REMS Automatic Parting Off Machine Type 95S. Instruction, Operating andServicing Manual including clamping Device and Loading-magazine Manuals.

MR90A REMS Tornado 2000/2010/2020 Pipe Threader. English, German, French,Italian, Spanish, Dutch, Swedish, Norwegian, Danish, Finnish, Portuguese,Polish, CZE, Hungarian, HRV, Russian.

MR100 RENISHAW Laser Training Course Manual. Comprehensive Instruction Manualto setting up, using and exploiting laser measurement technology.

MR100A RENISHAW Probe Systems for machining centres FANUC 0-6-10-11-12-15/MSeries for YASNAC MX2 and MX3 (Matsuura), MX2 Series. Detailed Operator'sInstruction Manual with M15 hard Wire Supplement.

MR100B RENISHAW Inspection Plus Software Programming Manual.

MR100C RENISHAW Retrofit Software package For FANUC 6MB Control. Users Guide.

MR100D RENISHAW FANUC 11MA Toolsetting Inductive. Users Guide.

MR100E RENISHAW MP7 Compact Optical for FANUC 6MB Control. Users Guide.

MR100F RENISHAW Hard copy, Printer option for FANUC 11MA. Users Guide.

MR100G RENISHAW TP200 Precision Tough-trigger Probe and SCR200 Stylus ChangeRack User's Guide.

MR100H RENISHAW P1200 Interface for TP200 Probe. Installation Guide.

MR110 REX Hacksaw "Six and a Half M" Instruction Booklet. Includesdetailed and well illustrated sales and specification catalogues for the Models"Light", 6.5M, 7.5-inch and 10-inch.

M110 REXVALTER "Rex" VF-118 lathe. Simple Operator's hand book withscrewcutting charts and sectional diagrams of headstock and gearbox. Swedishtext.

MR120 REZNOR Heaters Type X, XA, XB, XC, XD, XE and XJ. Installation,Operator's Instruction and Maintenance with Electrical Schematics.

MR130/MX20 RF-30 Miller-Driller. Instruction Manual and Parts as ExplodedComponent Drawings.

MR140 RHODES RH Series Open Fronted Presses - 25 to 300 tons, RHO Series 100 to300 tons and RHS Series 100 to 300 tons (as the RHO but fitted with motorisedvariable stroke and slide adjustment mechanisms) Operator's Instruction Manualand Parts Manual as Exploded Component Drawings for all Models. Includesmanuals for various third-part fitments including the BHI Powerblock 3000,Thermal Overloads and Pneumatic Timing Relays, Tecalemit Lubrication, AirPressure Regulators, etc. together with a detailed Technical Specification Bookletfor all models.

MR140A RHODES 150-ton Type RS OpenFronted Press: Operator's Instruction Manual.

MR140B RHODES RF Series Open FrontedPresses. Simple Operator's Instruction Handbook; Assembly Instructions for theHi-Powerblock 3000; Instructions and Parts List for the Tecalemit LubricationSystem; Instructions for the Series RO-4 Air Pressure Regulators; MaintenanceInstructions for the BHI Thermal Overload Units and the Pneumatic Timing RelaysType 906.

MR140C RHODES CHE 30/4 Hydraulic Shearing Machine. Operation and Maintenance Manual with Electrical Schematics.

RIBON - See under ELGIN RIBON above

RICHARDS BORERS - see also under"KEARNS" above.

MR150 RICHARDS Horizontal Boring Machines: all early models, often marked"The Pearn Richards Machine", were covered by one publication givingoperating and Maintenance details.

MR150A RICHARDS (George Richards) No. 1 Horizontal Boring Machine. Operating Instructions.

MR150B RICHARDS (George Richards) Vertical Borers. Detailed Instruction andMaintenance Manual with a Parts Manual as clear Sectional Drawings with threeeditions of the maker's Sales & Specification Catalogue. This manualapplies to many Richards twin-column Vertical Borers with a round table - theyall shared a commonality of many parts. The first page of the manual isarranged for the machine specification to be partially completed by hand - inthis case marked MB10M for a 10-foot table model

MR150C RICHARDS (George Richards) BM12H Horizontal Borer. Operator'sInstruction and Maintenance Manual with Parts Manual as Sectional Drawings.

MR150D RICHARDS (George Richards) BM12v Vertical Borer. 12 large electricalsheets.

MR150E RICHARDS Kearns-Richards BTX40 Horizontal Borer. Operator's Instructionand Maintenance Manual with Parts Manual as Sectional Drawings.

MK150E/318F RICHARDS (KEARNS) PR Series Horizontal Boring and Facing MachineManual of Instruction. This was issued together with, and intended to be usedalongside, a very detailed 63-page Technical Sales and Specification,Accessories and Tooling Catalog.

MR150G RICHARDS (George Richards) PR Horizontal Boring and Facing Machine"Tools and Equipment". *

MR150H RICHARDS (George Richards) HBF Type Horizontal Boring machine.Operator's Instruction and Maintenance Manuals. The borer was made in early andlate versions so two manuals are included.

MR150J/MK318P Richards (also found badged Kearns-Richards and Staveley)"Electrabore" Boring and Facing machines. Two manuals in one coveringboth early and late machines ("round" and "angular"styling) and all sizes (A, B, C and D) and Versions: T, S, W, O, e.g. some beingmarked AT, BT, CT, ATX, ATY, ATZ, BTX, BTY, BTZ, CTZ, CTY, CTZ, AS, BS, CS,TA30, TB40, TC50, TC60, WA30/72, WB40/84, WB40/102, WC50/144, WC60/144,WC50/168, YA35, YB50, YC60, XA35, XB50, XC60, etc. Operator's Instruction andbasic Maintenance Manual together with a detailed Sales & TechnicalSpecification catalogue.

MR150JE RICHARDS (George Richards) No. 4 & 5 Electrabore Horizontal Boringmachines. Operating & Maintenance Instructions.

MR150K RICHARDS (George Richards)'VK' Vertical Slot Drilling and Keyway Slotting Machine. Operating Manual withGeneral Arrangement Photograph.

MR150L RICHARDS (George Richards) Type 35 Borer - Electrical Schematic Set (10drawings)

MR150M/MK318K KEARNS-RICHARDS TK, SB, SK and TK Horizontal Boring and MillingMachines (Sometimes marked Staveley). Detailed Instruction and MaintenanceManual and Parts as Sectional and Exploded-component Drawings.

MR15P/MK318L RICHARDS Kearns-Richards BTX40 Horizontal Borer. Operator'sInstruction and Maintenance Manual with Parts Manual as Sectional Drawings.

MR150N RICHARDS Hyrdabore Boring Machine. Care, Operation & MaintenanceManual.

MR180 RICHMOND 14-60 Milling Machine. Operator's Instruction Manual with WiringDiagram.

MR180A RICHMOND 14-60 Milling Machine. Parts Manual as Exploded AssemblyDiagrams.

MR180B RICHMOND 03SD Milling Machine. Simple Operator's Instruction Book.Includes a copy of the maker's Sales & Specification Catalogue.

MR181 RICHMOND No. 2 Milling Machine Universal and Horizontal. Instruction Bookwith Parts Manual as Exploded Component Drawings, an Electrical Schematic, acopy of the maker's Specification and Sales catalogue and an Accessoriescatalogue.

MR181B RICHMOND No. 3 Milling Machine - Vertical and Horizontal. Instruction Bookand Spare Parts Manual as Exploded Assembly Diagrams. Includes Sales andSpecification and Accessories Catalogues for all models.

MR181C RICHMOND Turret Milling (round ram) Operator's Instruction Manual.Includes Several Blueprints (pc).

MR181D RICHMOND Universal Diving Head 5-inch. Instruction Booklet with Table ofDifferential Indexing and Spiral Milling. Includes a copy of the maker'sSpecification and Sales Catalogue.

MR182A RICHMOND SR2 Radial Arm Drilling Machine (also badged as a Midgely &Sutcliffe). Operator's Instruction and Maintenance Manual with Parts Manual asExploded Component Drawings and Wiring Schematic.

MR182B RICHMOND SR3 Radial Arm Drilling Machine. Operator's Instruction andMaintenance Manual and Wiring Schematic.

MR182D RICHMOND SR.3 Radial Drilling Machine: 14 Blueprints of the wholemachine.

MR182E RICHMOND "CONSUL" Radial Drilling Machine: Instruction Manualand Spare Parts Manual as Exploded Component Diagrams. Includes ElectricalSchematics.

MR182F RICHMOND "HERALD" Radial Drilling Machine: Instruction Manualand Spare Parts Manual as Exploded Component Diagrams. Includes ElectricalSchematics.

MR182G RICHMOND "ENVOY" Radial Drilling Machine: Instruction andMaintenance Manual with Parts as Exploded Component Diagrams and ElectricalSchematics.(English, French and German Text).

MR82H RICHMOND "Tape Drilling Machine" with Plessey 1100 System.Operating Guide.

MR182J RICHMOND HB 3/12 Radial Drilling Machine: Instruction Manual.

MR284 RIGHI Mk. 2 (Hispano Oerlikon) Automatic Plug-board Controlled Lathe.Operator's Instruction and Maintenance Manual with large Electrical Schematic.

MR286 RIGIDE (RIGID Ltd Starrag) VS5, VS6 and VS6E Vertical HydrocopyingMilling Machines (Switzerland ). Operator's Instruction and Maintenance Manual(not a first class copy).

MR286A RIGID La RIGIDE (RIGID Ltd Starrag) Type 535 Pipe and Bolt ThreadingMachine: Operator's Instruction Manual and Parts Manual as Exploded Component Drawings.

MR286B RIGID La RIGIDE (RIGID Ltd Starrag) KAB-270 Hydrocopying Die Sinker.Operator's Instruction, basic Maintenance and Lubrication Manual with 25 largeElectrical & Hydraulic schematics.

MR286C RIGID La RIGIDE (RIGID LtdStarrag) Hydrocoping Milling Machines Types: S-2, S-3 & S-4. Operator'sInstructions, basic Maintenance and Lubrication Manual

MR288/MMG95 Rigidturn Lathe Models1810 and 2215 . Instruction Book and Parts as Sectional Drawings and ElectricalDiagram.

RIGIVA Milling Machines. Rigiva "manuals" tended to be skimpy affairswith the company producing one general guide (reference MR391C) and thenindividual bookelts coverings specifics for each machine to cover such asshear-pin replacement, spindle adjustments, lubrication points, electricaldiagrams, etc.

MR391C RIGIVA (RIVA) "Handbook For Milling Operations" Comprehensive100-page Well-illustrated General Operator's Guide For Rigiva Millers. Containsdetailed instructions concerning the operation of ordinary processes as well ashow to use many of the more complex accessories: Dividing Heads, Bevel GearCutting, Universal Dividing Head, Plain and Differential Indexing, MillingSpiral cams, Hob Milling, Cam Plate and Drum Milling, Automatic Cycle settings,etc.

MR391 RIGIVA (RIVA) "UO-A" MR391 RIGIVA (RIVA) "UO-A"Miller Basic Manual, Dimensions, Electrical Diagram and Spindle section(ITALIAN TEXT) This publication is issued together with the comprehensiveEnglish-langauge Manual "Handbook for Milling Operations" (Ref:MR391C above).

MR391A RIGIVA (RIVA) V6 MILLER: Basic Installation, Lubrication and Shear PinReplacement Instructions.

MR391B RIGIVA (RIVA) U6 and U8 Milling Machines. Instruction Manual withspindle-adjustment data, lubrication, shear pin details, wiring.

MR391D RIGIVA (RIVA) Universal Dividing Head. Manual with 36 pages of divisiontables.

MR391E/R220 RIGIVA (RIVA) Full-range Sales & Technical SpecificationCatalogue. Horizontal, Vertical and Turret Millers dated 1968 showing the U.2,U.6, U.8, U.20, V.2, V.4, V.6, V.20, V.20-P and the 0.2,0.6,0.8,0.20 etc withplain, non-swivelling tables), Autocycle V.20, Autocycle 0.6, Numerical controlV.100, S.8 Diesinker, V.6C & V.20C with hydraulic copying, Model S.G.A. GeometricallyShaped Dies Milling machine, 0.8-BA with powered overarm, 0.20-BA with poweredoverarm, C.400 cam milling and cam grinding machine, F.1200, F.1600, F.1700,F.2000, G1200, G.1600, G.2000, C.D., C.A, P.T.2, specialist machines for thetextile industry and a range of dividing heads, rotary tables, rack dividingattachments, vertical heads, special vertical heads, slotting heads, boringheads, worm & gear-cutting attachments, machine vices, compound tables,inclinable tables, optical readers, cutters, cutter holders, worm-screw cuttingdividing head, hob milling attachments, bevel gear attachments, etc. 51 pages.

MR440 RIKA KF-73-E Copy Milling Machine (Switzerland ). Service Instructionswith Large Electrical Schematics.

MR444 RINDIS Multi-purpose Machine Tools. A manual was never issued for thismodel but a well illustrated and detailed 8-page Sales and TechnicalSpecification that shows many of the set-up possibilities catalogue isavailable.

MR450 RISHTON Pro Mill 35 Vertical Miller. Operator's Instruction, MaintenanceManual and Parts Manual as Exploded Component Drawings. Includes a complete setof Rishton sales 7 Accessories catalogues.

Rishton VM602 and VM452 Vertical Milling Machines. Detailed Operator'sInstruction, Maintenance Manual and Parts Manual as Exploded Component Drawings- with an electrical schematic. Includes a complete set of Rishton Sales &Accessories catalogues. Also applies to the geared-head assembly as fitted tosome Colchester, Harrison, Viceroy and Myford lathes.

RIVETT.

Not all the publications below areManuals, but such is the interest in this maker that items are duplicated fromthe "catalogues" section. - -

R466D RIVETT 608 (USA) Workshop Manual and Instruction Manual. Army IssuePublication - Covers, in great detail, every aspect of the lathe and its use.Also applies, in general terms, to the earlier and similar 8-inch Precision.140 pages.

R466E RIVETT 608 Sales and Specification Catalogue with additional 6-page pricelist (1944 edition). A Superb copy from a mint-condition original.

R466F Rivett 608 "Blue Prints" Sectional drawing and various assemblydrawings.98 sheets.
< R466GX All the above 608 literature being a complete data pack for themodel.

R466H Rivett Patent Drawings. 91 interesting Pages with details of many Rivettpatents including such things as the 8-inch Precision Lathe's spiral millingattachment.

R466 R466I Rivett 1020S: Rivett 1020S: Parts as Sectional Drawings, LubricationInstructions; Electrical Data; sheets on the US Varidrive motors; Dingsmagnetic Disc Brakes "60-70-80" Series; Wiring & Coil ReplacementInstructions.

R466J Rivett 1020s: basic OperatingManual (9 sheets) plus the useful Sales and Specification catalogue. Scan toCD-ROM or print.

MR469 RIVETT Universal GRINDER MODEL 1024. Instruction Manual and Spare PartsManual as detailed Sectional Drawings. Includes a copy of the maker's 16-pageSales and Specification catalogue.

R466 RIVETT catalogue dated 1894. A superb production showing the Nos. 3 and 4bench lathes - and a vertical miller. 34 pages.

R466A Rivett All-models Catalogue dated 1898. Shows Millers, Grinders andLathes both Watchmaker and Precision Bench Types Numbers 3, 4, 5 and 8-inch.Includes watchmaking accessories and lathe drive systems. 106 pages.

R466B Rivett All-models Catalogue dated 1901. Shows Millers, Grinders andLathes. 100 pages.

R466C Rivett All Models Catalogue Circa 1903 - 1910 Rivett Lathes Models No.31/2, No. 4, No. 5 and "8-Inch Precision". 106 pages.

R466H Rivett 1020S Precision Toolroom Lathe: Catalogue.

R466K Rivett 505 Plain Precision Bench Lathe Sales and Specification Catalogue.12 pages.

R466L Rivett 507 Junior Bench Lath Sales and Specification Catalogue. Suchdetailed information that it might be regarded as an Instruction Manual. Scanto CD-ROM. 44 pages.

R466M Rivett 918 "Cabinet Lathe" Sales and Specification Catalogue.20 pages.

R467 All the above Rivett publications on CD-ROM. on CD. ashigh-quality prints.

MR468 Rivett 715 lathe. Operator's Instruction and Maintenance Manual.

MR475 ROBBE (MINILOR) TR-1 Lathe and Vertical Milling Head: ComprehensiveOperator's Instruction Manuals and Parts Manuals as Exploded Components.

MR478 ROBBRO and HASSTRUP A/S Migatronic MIG/MAG Welding Machines Types 100,120, 140, 160, 250, 300 320 7 350. Instruction Book with Parts Manual asSectional and Exploded Component Drawings and Electrical Schematics. .

MR480 ROBINSON Bandaw Type XF/T Operating Instructions.

MR480A ROBINSON 24-inch Bandaws Types EY/E and EY/T Operating Instructions withPhotographic Parts List.

MR480B ROBINSON Automatic Bandsaw Filer and Blade Setter Type LFB/T InstructionManual.

MR480C ROBINSON Cutter Balancing Unit Type ZX. Instruction Book

MR480D ROBINSON Pro-Set Cutter Profile Developer Type ZG. Comprehensive Operating Manual together with a separate 8-page booklet explain the system in even greater detail.

Robland X260 to X310 Universal Woodworkers. Operator's Instruction andMaintenance Instructions with Parts as Exploded Component Drawings. English,French, Dutch and German Text.

MR486 ROBLAND K120 Multi-function Woodworker - circuits diagram.

MR490 ROBLING 650 and 850 Lathes. Operator's Instruction and Maintenance Manual- German text. Includes a (reasonable) copy of the maker's Sales andSpecification Catalogue.

MH733 ROBOT Surface Grinder - as copied by HOBROUGH in the UK. Basic Operator'sInstruction and Maintenance Instructions with Parts as Sectional Drawings(Hobrough publication). The ROBOT/HOBROUGH grinder is very similar to the Brown& Sharpe 2B and, in case it helps, the parts manual for that model isincluded as well.

MR515 ROCKFORD (USA) SHAPER 14-inch Instruction Manual, Maintenance Manual andParts Manual as Exploded Assembly Diagrams.

MR515A ROCKFORD (USA) SHAPER 16-inch Instruction Manual, Maintenance Manual andParts Manual as Exploded Assembly Diagrams.

MR515B ROCKFORD (USA) No. 1 RIGIDMILL Installation, Operator's Instruction andMaintenance Manual with Parts Manual as Detailed Sectional Drawings.

ROCKFORD Hy-Draulic Machines - see under "Hy-Draulic"

ROCKWELL = DELTA ROCKWELL = Lathes and Milling machines using this brand nameare listed in the DELTA section above

MR522 ROCKWELL 6-inch Jointer Illustrated Parts Manual Model 6520-1.

MR523 ROCKWELL SERIES 70-100 Geared-head Drilling Machine Instruction Manual,Maintenance Manual and Parts Manual as Exploded Assembly Diagrams.

MR523A ROCKWELL DRILL SERIES 70-150 Geared-head Radial-arm. Machine InstructionManual and Parts Manual as Sectional-Drawings.

MR523B ROCKWELL DRILL Sliding Head SERIES 15-127. Operator's and MaintenanceManual and Parts Manual as Exploded Assembly Diagrams.

MR523C ROCKWELL DRILL SERIES 17-232 Variable-speed drill press. Operator's andMaintenance Manual and Parts Manual as Exploded Assembly Diagrams.

MR526 ROCKWELL Band SAW HORIZONTAL Model V: Instruction Manual.

MR526B ROCKWELL Band SAW HORIZONTAL Model 7V, Wet, Dry and Portable Models:Instruction Manual and Parts as Exploded Component Drawings.

MR526C ROCKWELL Band SAW 14-inch Vertical Model V Horizontal Band saw.Instruction Manual.

MR526D ROCKWELL Band SAW 20-inch Vertical Model V Horizontal Band saw.Instruction Manual.

MR526E ROCKWELL Band SAW. Model 10 Standard and 10A-Automatic. Operator'sInstruction and Maintenance Manual with Parts Manual as Sectional Drawings andElectrical Schematics.

MR526F ROCKWELL Band SAW. Model 12A: Detailed Operator's Instruction Manual.

MR529 Rockwell Hardness Testers by the original US Wilson Company (then Acco Industries). Not a manual but a detailed explanatory Booklet from the 1980s describing how to determine which type of tester to choose for different jobs and materials with copious notes on the different types and methods to be used. Includes details of the WDS Series, DT-PL Series, JR Series, JS Series, TT and TY Series, Y Series, OUR and OUS Series, Goosenext Adapters, Goosneck Anvils, Test Blocks, Work Supports, Vari-Rest, Jack-Rest, Gear Testing Fixture, Equitron Fixture, GN Tester and other accessories.

MR530 ROCKWELL HARDNESS TESTING Methods (Engineering Series): ExplanatoryBooklet.

MR530A ROCKWELL HARDNESS TESTERS Models JR and J5. Operator's Instruction Book.

ROCKWELL HARDNESS TESTING - see also under ESEWAY Machines above

MR65 Rockwell Hardness testers by REICHERTER (Georg Reicherter) BRIRO AUTOMATRockwell Hardness Tester. Instruction Book (in English and German).

MR531/MM510P ROCKWELL-MATRIX 25-ton Dieing Press Air-clutch Model. ReplacementParts list as Sectional and Exploded component drawings.

MR532/R980 RODNEY (MYFORD RODNEY) MILLING ATTACHMENTS Full-size and Mini - asused on Myford, Boxford and other small lathes. Sales & TechnicalSpecification & Technical Specification Sheet - includes the maker's 1-page(simple) operating instructions). 5 pages.

MR540 ROLLO SUPREME Lathe. Maker's slender combined basic Instruction Manualand Catalogue set.

MR545 Romarc MIG-325 Welder Manual with Electrical Diagrams.

MR548 ROMI lathes S20 & S20A. Instruction & Maintenance Manual with acopy of the maker's Sales & Technical Specification Catalogue.

MR550 Rosa Ermando RTRC-1600 andRTRC-1200 Grinders. Operator's Instruction and Maintenance Manual withElectrical Schematics. English, French, German, Italian and Spanish text (not afirst-class copy).

MR552 ROSE FORGROVE 84 Super G Flowpack Machine. Operating Instructions, List of Spare Parts and Electrical Details (but no schematic)

MR552A ROSE FORGROVE RF21 Cartoning Machine. Detailed Operation and Maintenance and Adjustment Manual.

MR555 ROSENFORS RFE, RFU, RFV and RFV-M Milling Machines. Instruction andMaintenance Manual with Electrical Schematic.

MR560 ROTEX (USA) Vertical and Horizontal Milling Machine (VM and RM) PartsManual as Exploded Components Diagrams together with copies of the maker'stechnical Sales and Specification literature.

MR600 ROTWERK EFM-200-DS Milling and Co-ordinated Drilling Machine. Operating Instructions and Parts asExploded Component Drawings. FRENCH text only.

MR742/MW360 Rowen-arc (WESTINGHOUSE) ARC WELDER Type TR (AC/DC). InstructionBook. (see WESTINGHOUSE).

MR742 RS 512 DC Speed and TorqueControl Module. Instruction and Maintenance Manual.

MR743 Rowen-arc (Rubery Owen) RSAWelder and SAP Controller. Operator's Instruction and Maintenance Manual withParts.

MR744 Rowen-Gloor, Rowen-Arc (Rubery Owen) Rowen-Gloor Jointed Arm Flame Cutting Machine. Operating and Dismantling Instructions and a Parts Manual as Exploded Component Drawings.

MR745 ROWLAND 20-inch single-head and 30-inch Duplex Head Grinding Machines(F.E.Rowland , Stockport, UK) Installation, Operator's Instruction andMaintenance Hand book. Also includes: a very informative Whole-range TechnicalSales Catalogue and covering letter from the makers that explains how themachines work and the tasks they are capable of performing and two drawingsshowing the setting procedure for a rotary, oscillating and through-feedmachines machine where the alignment is taken from a truing device.

MR745A ROWLAND 12-inch Duplex Surface Grinder. Brief Installation, Operating and Maintenance Instructions.

ROYAL LATHES - Sweden - see belowunder the makers "Vesuv"

MR748 RUARO AV-760 Cylinder Boring Machine. Spare Parts Manual as Clear Exploded Component Drawings. English, French, German and Italian text.

MR748A RUARO RB-600 Connecting Road Boring and Grinding Machine. Well-illustrated Operator's Instruction Manual with foundation plans,and an Electrical Schematic.

MR748B RUARO RT-7-S3 Surface Milling and Grinding Machine for Motor Vehicle Cylinder heads, Blocks and other Flat Surfaces.Operator's Instructions with Electrical and Hydraulic Schematics

MR752 Ruhla/Thiel Duplex 58 Precision Universal Milling. Operation &Maintenance Manual with detailed and useful sectional drawings and ElectricalDiagrams (German text only). Includes copies of the only two knownEnglish-language Sales and Technical Specification Catalogues - an additional18 pages.

MR752A RUHLA (UMF RUHLA) DUPLEX 59Universal Precision Milling Machine. Operation & Maintenance Manual andmany detailed and useful sectional drawings. GERMAN TEXT only.

MR755 RUSCH Bandsaw HBS Operating and Maintenance Instructions with Parts asDetailed Sectional Drawings.

MR755A RUSCH Bandsaw HBSA-1 and AS-250: Operating and Maintenance Instructionswith Parts as Detailed Sectional Drawings. Includes a manual for the StoberVariable-speed Drive Motor-gearbox Unit

MR755B RUSCH Bandsaw HBS-7 HBS-250: Operating and Maintenance Instructions withParts as Detailed Sectional Drawings. Includes a manual for the StoberVariable-speed Drive Motor-gearbox Unit and some extra sheets showing analternative Pressure Regulator System and a different switch cover.

RUSHTON OIL ENGINES Vo and VH: Spares as Sectional Drawings.

MR757 RUSHWORTH Guillotines (see also under Morgan-Rushforth). Generalinstructions for all sizes. Two editions are included, one marked for the 6-foot by 3/16" machine. Sectional parts Drawings are included.

MR757B RUSHWORTH Press Brakes. Combined catalogue/hand book/technical datapublication, General Notes on Operator's Instruction with Maintenance withuseful Sectional Drawings and Electrical Diagram.

RUR - see under ELGIN RIBON

MR760 RUSSELL ROCKER RS20 and RNF20 Saws: Instruction and Maintenance Manual(with Electrical and Hydraulic schematics) and Sectional Drawings.

MR760A RUSSELL One-hundred RS Saws: Instruction and Maintenance Manual (withElectrical and Hydraulic schematics) and Sectional Drawings.

MR760B RUSSELL Twelve and one-half Automatic Sawing machine. Operator'sInstruction and Maintenance Manual with Parts as Sectional Drawings andHydraulic Diagrams.

MR760C RUSSELL 14" and 15" Vertical Hydrofeed Cold sawing Machine.Operator's Instruction and Maintenance Instructions (2 sheets) with largeSectional Drawings of gears in saddle and a large Hydraulic Diagram.

MR760D RUSSELL 22/18 and 22/28 Automatic Hydrofeed Cold Sawing Machines.Operator's Instruction and Maintenance Instructions with Parts Manual asSectional Drawings.

MR760E RUSSELL 11/40 Saw Sharpening Machine. Operator's Instruction andMaintenance Instructions.

MR760F RUSSELL Hydrofeed Model 16/20 Cold Sawing Machine. Instruction, Maintenance and a Parts Manual as Sectional Drawings.

RUSSIAN MACHINE TOOLS - See under "STANKOIMPORT" below.

MR680 RUSSIAN "Stankoimport ROUND-BED Universal 3" Model-engineeringlathe. Operating Instructions. Available in English, French, German andItalian.

MR950 RYDER No. 6 VERTICALAUTO: Detailed Operator's Instruction Manual.

MR950B RYDER No. 8 VERTICALAUTO: Detailed Operator's Instruction andMaintenance Manual including Hydraulic and Electrical Schematics and SpareParts Manual as clear Sectional Drawings.

MR950C RYDER No. 10 VERTICALAUTO for 6, 8 and 12 spindle models: DetailedOperator's Instruction Manual with a Parts Manual as clear Sectional Drawings.

MR950 RYDERMATIC No. 18 Operator's Instruction Manual. (pc)

MR955 RYE Auto Shaper Type R/72. Parts list - no illustrations.

SAALFELD = see under WMW & UNION below

Pillar Drilling Machine BS-20-A1, Box Column Drilling Machine BK-20-A1 andGrand Box Column Drilling Machines BKR-20 x 2 to 6-A1. Operator's Instructionand Maintenance Manual with Electrical Schematics.

MS100 SAF (SAFAN) Model CL/M Bending Machines. Instruction Hand book.

MS100A SAF (SAFAN) Model CL/3H Bending Machines. Instruction Hand book withParts as Sectional Drawings.

MS300 SAFAN "CN" Corner Notcher. Instruction and Maintenance Manual(English, French and German text).

MS300A SAFAN "SK" Folder and Bending Machine. Instruction andMaintenance Manual with Illustrated Parts Manual.

MS300B SAFAN "DoneWell" Pressbrake. Operator's Instruction Manual.

MS300C SAFAN "SK" Folder and Bending Machine. Instruction andMaintenance Manual with Illustrated Parts Manual.

MS300D SAFAN "VS" Power Shear (Chicago Power Shear). Instruction andMaintenance Manual with Parts as Sectional Drawings.

MS350 SAfa*g 1a Automatic Wheel and pinion Cutting Machine. Operator'sInstruction Manual with numerous drawings showing all the various elements ofthe machine and how they relate to the instructions.

MS350A SAfa*g 2a Automatic Wheel and pinion Cutting Machine. Operator'sInstruction Manual with numerous drawings showing all the various elements ofthe machine and how they relate to the instructions.

MS350B SAfa*g Type 4 Duplex Horizontal Milling Machine. Operator's InstructionManual with electrical diagram and numerous drawings showing various elementsof the machine and how they relate to the instructions. Includes a sectionaldrawing through the head and charts and graphs showing "The AdjustingAngle for Helical Copying Device".

SAG Lathes - see under GRAZIANO

MS375 SAFOP Leonard-Heid Facing Lathe. Operator's Instructions with a number ofsectional drawings. English and Italian Text.

MS400 SAGEM U2P Universal Milling Machine. Operating Instructions in English and French.

MS400A SAGEM U2M Universal Milling Machine. Operating, Maintenace and Parts Manual. English and French Text Instructions.

MR445 SAIMP ( S.A.I.M.P.) JSS230 and JS205 Lathes Junior Special: Operator'sInstruction and Maintenance Manual with Parts Manual as Detailed SectionalDrawings.

MR445A SAIMP ( S.A.I.M.P.) BARRETT 16" x 60" Lathes: Operator'sInstruction and Maintenance Manual with Parts Manual as Detailed SectionalDrawings.

MR445B SAIMP ( S.A.I.M.P.) Vertical Miller "PEARSON H". Operator'sInstruction and Maintenance Manual with Parts Manual as Detailed SectionalDrawings.

MR445C SAIMP FV-0 Vertical Milling Machine. Parts as Sectional Drawings(includes a few imperfect sheets).

MR445D SAIMP Millers - Manuals for these machines is sought - if you have any,please do make contact. manuals@lathes.co.uk

MS450 SAJO HBF-450 and VBF-450 Borers (horizontal and vertical models).Instruction and Maintenance Manual with program examples for the autofeeds.Includes a single hydraulic diagram.

MS450B SAJO VF-54 Vertical Milling Machine Instruction and Maintenance Manualwith Parts as Sectional Drawings. Includes a well-produced 10-page Sales &Technical Specification Catalogue.

MS450C SAJO VF-52 Vertical Milling Machine Instruction and Maintenance Manualwith Parts as Sectional Drawings.

MS450D SAJO APF-54 Horizontal Milling Machine Instruction and MaintenanceManual.

MS450E SAJO UF-24 and PF24 Horizontal Milling Machine Instruction, Maintenance and Parts Manual.

MS453 SAKAI ML360 Lathe and MillingHead. Instruction Manual and Parts Manual as useful Exploded Assembly Diagramand a comprehensive Sales, Specification & Accessories Catalogue. Includedare details of how to use the full range of accessories.

MS453A SAKAI ML210 Lathe & Milling Head. Instruction Manual with a PartsManual as useful Exploded Assembly Diagrams and a comprehensive Sales,Specification & Accessories Catalogue. Included are details of how to usethe full range of accessories.

MS456 SALA Guillotine Model CGO:Operator's Instruction and Maintenance Manual.

MS456A SALA ADIGE Automatic saw. Electrical Wiring Diagrams.

MS457 SALLAZ Grinding Machines for Tungsten Carbide Burnishing Wheels TypesR49, R.O/49, Type 3 and Type 2. Sales & Specification Catalogue. 6 pages.

MS458E SAMECA Autosam 3.26 Bar Magazine. Operation and Maintenance Manual with Electrical Schematics.

MS458A SAMECA Hydro Bar Feeder. Operator's Instruction and Maintenance Manualwith electrical diagrams and Parts as Annotated photographs.

MS458B SAMECA MONOSAM 45 Bar Feeder. Operator's Instruction and MaintenanceManual with electrical diagrams and Parts as Annotated photographs.

MS458C SAMECA Multisam MUZ 6.8 Magazine Bar Feeder. Detailed Installation, Operation and Maintenance Manual with Electrical Schematics, Parts as Sectional Drawings and a copy of the Manual ""Customer Pre-Installation and Operating Instructions".

MS458D SAMECA Quicksam 7.52 and 7.66 Bar Feed Systems. Detailed Installation, Operation and Maintenance Manual with a number of useful sectional drawings. (NE)

MS458E SAMECA Autosam 3.26 Bar Feed Magazine. Operation and Maintenance Manual with Electrical Schematics.

MS458F SAMECA Monosam D32 Bar Feeder Installation and Operating Instructions with Electrical Schematics.

MS458G SAMECA Multisam 2000 Bar Feeder Installation and Operating Instructions with Electrical Schematics. . FRENCH TEXT ONLY

MS458H Multisam 12.65 "Technical Description Manual". Details of how the machine works and various coding functions.

MS459 Samson: Samson Shearing, Rod Cutting, Angle and Pipe Bending and PunchingMachines - general descriptions with photographs and detailed specifications.

MS459A Samson: Samson Model 00 - General description and specification.

MS460 SANCHES BLANES TMB 9-inch lathe South Bend Copy. The best operationManual for this lathe is the one for the English BOXFORD South Bend copy. Thiscomplete and far-better early edition - actually a "Box-Fordised"plagiarism of the original South Bend publication but with lots of extra data.Includes the makers slim but useful Sanches Blanes handbook and illustratedParts List.

MS460A SANCHES BLANES TMB 9-inch lathe South Bend Copy. maker's basic hand bookand Photographic Parts List.

MS460SS SANDENS (Mek. Verkstad Varnamo) SAJO Bettfrasmachine VBF450 und HBF450(Frase) Umfassend Betriebsanleitung. Deutscher Text.

MS461 SANFORD Miniature Surface Grinder. Operator's Instructions and a 9-pageCatalogue Set.

MS462 SARO Lathes 1250, 3000, 6000 and 9000. Instruction and MaintenanceManual.

MS463 Saunders Roe Machine-Shop Lathe work. An interesting 169-page book intended for absolute beginners to lathe work in a WW2 factory. It assumes no previous knowledge of lathes or machine-shop practice.Covers lathe history, names of parts, tools, general turning, measuring, safety, cutting speeds, sharpening of tools, use of accessories such as steadies and useful tables and reference lists.Also includes an introduction to the capstan lathe and how to set it up and machine typical jobs. Includes lots of useful and practical hints and tips to get the best out of a lathe.

MS464 Saupe MD200 Mini-Turn. Manual and Exploded Diagrams Parts Manual.

MS464A Saupe 350-SD lathe. Manual and Exploded Diagrams Parts Manual. Italianor German text.

MS464B Saupe 630-KBF Milling Machine. Manual and Exploded Diagrams PartsManual. Italian text.

MS466 SAUTER KM-62 Hydraulic Tracer (copying) Unit : Operator's Instruction andMaintenance Manual with list of wearing parts and Spare Parts.

MS466A SAUTER KAG 101 Thread-Cutting Unit. Detailed Operation Manual withElectrical Schematic. GERMAN TEXT.
MS466B SAUTER Disk-type Tool Turret with electric drive. Installation, Operation, Maintenance and Dismantling Manual with Parts as a Sectional Drawing (0.5.480.316).

MS473 SCHARMANN FB75 Opticut Horizontal Boring and Milling Machines.Instruction, Maintenance and Technical Manual. English andGerman Text.

MS473X SCHARMANN FB132 Opticut Horizontal Borer. Operation, Maintenance andTechnical Manual with English and German text. (stored FC7-D2)

MS473B SCHARMANN FB85, FB100 & FB125 Horizontal Boring and Milling Machines (Bohrwerk). A 2-edition pack of the Instruction and Maintenance Manuals and copies of the detailed Sales, Technical Specification and Accessories Catalogues.

MS473BE SCHARMANN FB125 Horizontal Boring and Milling Machine (Bohrwerk). Verylong fold-out electrical schematic.

MS473BF SCHARMANN FB160 Horizontal Boring and Milling Machine (Bohrwerk).Instruction and Maintenance Manual. English & German text.

MS473BFX SCHARMANN FB160 Horizontal Boring and Milling Machine (Bohrwerk) Two very large electrical Schematics and Foundation plan.

MS473C SCHARMANN WB2 and WB3 Horizontal Boring and Milling Machine. OperatingManual (vpc).

MS473D SCHARMANN WB75 Horizontal Boring Machine. Instruction and MaintenanceManual. Dual English and German text edition.

MS473E SCHARMANN WB80 Horizontal Boring Machine. Instruction and MaintenanceManual with a copy of the maker's Sales and Specification Catalogue.

MS473F SCHARMANN WB85 Horizontal Boring Machine. Instruction and MaintenanceManual.

MS473G SCHARMANN Elektrokonzept Sinumerik 850 M System Diagnose Manual (GermanText)

MS473H SCHARMANN How to Employ Scharmann Borers. The "Opticut System. A booklet with the details of the Scharmann System and Machines.Includes details of: Selecting the Machine Types WF, WF-ax, WF-qv, WFT, Boring Mill Combinations, Work Tables and Floor Plates, Drive and Clamping Systems,Spindle Bearings, Tool Registers and Chucking, Thermal Stabilization, Digital Readouts,Optical Measuring Devices, Operating Techniques.

MS475 SCHAUBLIN 70 and 65 Lathes: Servicing and Adjustment Manual with PartsManual as Drawings of Individual Units (including basic dimensions) and a copyof the comprehensive 55-page Sales and Specification and Accessories cataloguefor the Schaublin 70 together with an earlier combined 65 and 70 Catalogue.This literature represents a complete data pack for the Schaublin 70 and 65.

MS476A SCHAUBLIN 102-VM Screwcutting Lathe: Operator's Instruction and ServiceManual. This is the rare edition with some Parts as Dimensioned and SectionalDrawings. Includes electrical schematics and a copy of the comprehensivededicated 102-VM Catalogue. (also available with French Text)

MS476B SCHAUBLIN 102, 102-80, 102-82 and 102-SV Plain Lathes. Because of theconsiderable interest in this lathe a complete Data Pack has been built up fromseveral manuals and sales catalogues. The material: Operator's Instruction andService Manual with Parts as Sectional Drawings (including the capstan head)with the critical headstock bearing adjustment instructions for both plain andbackgeared units (with sectional drawings); electrical diagrams. Drive systemsincluding how to adjust the mechanically and pneumatically operated clutch andbrake units (with sectional drawings); the variable-speed unit andspeed-reduction units. High-precision 3-jaw chuck (Burnerd Grip-tru); oil-mistlubrication equipment; lever-operated collet closers; 4-tool turret, grindingattachment, centring and built-in microscopes, Multi-fix toolholders, theoverhead drive attachment, tailstock reduction bush, compound slide drawingsincluding the special 150 mm stroke unit with off-set zero dial; indexingtables for the 4-disc dividing attachment, electric motors, filters - andcopies of the maker's comprehensive Sales, Specification and AccessoriesCatalogs (an additional 84 pages).

MS476E SCHAUBLIN 102-SV Lathe (plain-turning, no screwcutting): Service andOperator's Instruction Manual (29 pages, included in Publication MS476B above).

MS476F Schaublin 102-SV Lathe: Instruction Manual in French, but many usefulSectional diagrams. (Pages 12 and 13 incomplete).

MS477 Schaublin 120-VM Backgeared and Screwcutting Lathe. CombinedEnglish and German editions of the Operator's Instruction and Maintenance Manualwith Adjustment Instructions and Parts as Sectional Drawings and the separatelist of dimensioned drawings for commonly-wearing parts. Both are included asthey combine to provide fuller details than the individual publications. TheEnglish version has 79 pages and the German 100.

MS477SPH Schaublin 102 lathe. Spherical Turning Attachment Type 102.53 Chariot a Tourner Spherique Pour. French text edition of the instruction book with clear diagrams

MS477C Schaublin 125 Lathe: Workshop Manual and Illustrated Parts Manual,Operating Manual, full set of Sectional Drawing of the entire machine. (62pages) Additional 16 page screwcutting supplement, a special section on theMaintenance of the electric motor and electromagnetic brake and one on theSinus-Multi Disc clutch. Includes a copy of the maker's comprehensive Sales,Specification and Accessories Catalogue.

MS477CF Schaublin 125 Lathe FRENCH TEXT Workshop Manual and Illustrated PartsManual, Operating Manual, full set of Sectional Drawing of the entire machine,screwcutting supplement, Electrial Supplement with wiring schematics, a specialsection on the Maintenance of the electric motor and electromagnetic brake andone on the Sinus-Multi Disc clutch. Includes a copy of the maker'scomprehensive Sales, Specification and Accessories Catalogue.

MS477CC Schaublin 135 Lathe. Operating & Maintenance Manual. Not the bestof copies - but adequate.

MS477D Schaublin 9A Cam Forming Lathe: Operator's Instruction Manual.

MS480 Schaublin 12 (SV12) Miller. Full-edition Operator's Instruction, Serviceand Adjustment Manual with Sectional Drawings, Parts as Component Drawings, anElectrical Schematic and detailed, well-illustrated Sales Catalogue. BothEnglish and German editions included as the German one includes additionalillustrations.

MS480D Schaublin 13 Precision Vertical Miller early "rounded-style"1950s and early 1960s. Combined publication with all available data: Operatingand Servicing Instructions, Illustrated Parts Manual as Exploded ComponentDrawings and a copy of the detailed Sales and Specification and AccessoriesCatalogue.

MS480E Schaublin 13 Precision Vertical Miller later "square" version1960s onwards with distinctly "angled edged" casting to hold the kneelift screw. Operator's Instruction and Service Manual with Parts Manual asSectional Drawings.

MS480F Schaublin 22 Precision Vertical Miller. Operator's Instruction andService Manual with Parts Manual as Sectional Drawings.

MS480G Schaublin 22 Precision Vertical Miller. Electrical Manual with largeSchematics.

MS480H Schaublin 51 Precision Vertical Miller: Complete Service, Maintenanceand Operator's Instruction Manual with many parts shown as sectional drawingsIncludes an electrical schematic and dividing Index tables. GERMAN TEXT.

MS480J Schaublin 53 Precision Vertical Miller: Complete Service, Maintenanceand Operator's Instruction Manual with Parts as useful Exploded ComponentDrawings including sets for the High-Speed Head, Slotting Head, UniversalDividing Attachment, Rotary Table with power-feed attachment, and otheraccessories. Includes Index tables.

MS480K Schaublin Rotary Table for use on the Type 53 Miller. Table and GearingCharts.

MS480G Schaublin 53N Precision Vertical Miller (late-model angular styling): AComplete data packing including: Maintenance and Operator's Instruction Manualwith Parts as useful Exploded Component Drawings including sets for theHigh-Speed Head, Slotting Head, Universal Dividing Attachment, Rotary Tablewith power-feed attachment, and other accessories. Includes Index tables, anElectrical Manual with 5 Schematics (including two large ones( and a copy ofthe maker's 40-page Sales and Specification Catalogue and

MS480RT Schaublin 20 Rotary Transfer Machine. Operator's Instruction andMaintenance Manual with many useful sectional drawings.

MS481 SCHAUDT Cylindrical Grinder Gr.433 Comprehensive Operator's Instructionand Maintenance Manual with Parts as Sectional Drawings - German Text.

MS481A SCHAUDT Cylindrical Grinder B-700 N-500. Comprehensive Operator'sInstruction and Maintenance Manual with Electrical and Hydraulic Schematics.

MS481B SCHAUDT Cylindrical Grinder ERTS-30-500. Basic Operator's InstructionManual with Electrical Schematics.

MS481C SCHAUDT Cylindrical Grinder PSA ULTRA Models PSA500, PSA750, PSA1000 andPSA1500 Operator's Instruction Manual with a number of Sectional Drawings

MS481D SCHAUDT Cylindrical Grinder A502 S750 Comprehensive Operator'sInstruction and Maintenance Manual with 29 large Electrical Schematics.

MS481E SCHAUDT Camshaft Grinder NWS 1800. Automatic Adjustment of Radialdepth-of-cut Grinding Wheel. Instructions and Electrical Schematic.

MS482 SCHENCK Balancing Machine Type H30V. Detailed User's Instructions.

MS482A SCHENCK Balancing Machine Type RL-30-UB. User's Instructions.

MS482B SCHENCK Balancing Machine Type 102 RBTK. Huge Operation Manual withElectrical and Control Schematics on large A1 and A2 sheets. Complete assupplied to the original customer.

MS482C SCHENCK Balancing Machine Type H3/N/3. Technical Documentation including:Certificates, Test Protocol, Assembly, Foundation Plan, Installation and Dismantling, Overview of Balancing Procedure and Parts of the Machine, Functions of Switching and Operating Elements, care of Electric Motor, Checking the Drive Shaft, Bearing Pedestal, Drive System, Measuring Head, Safety Enclosures, Unbalance Correction, Enclosures, etc.

MS483 SCHIESS 13EK Single Column Vertical Turret Lathe: Operating andMaintenance Manual. *

MS483A SCHIESS KEA100 Single Column Vertical Turret Lathe. Full Operating|instructions.

MS483B SCHIESS KEA100. Short Service Instructions (German text) with 3 largeElectrical Schematics.

MS484SCHLATTER (Swiss) PS-80-H Spot and Stitch Welding Machine. Operation Manual with Electrical Schematics and instructions for the "Ignitrons" types 2052, 5551A. 552A, 5553A, 5555 and 5822A

MS484BSCHLATTER (Swiss) PAC-14D & PAC-12D Wire-fed Welder. Parts Manual.

MS484CSCHLATTER (Swiss) PAC-14D Wire-fed Welder. Installation, Operating and Maintenance Instructions for Contact Welding Automatic with Pneumatic Shaping Device.Includes Electrical Schematics and a manual for the Arter & Co. Mannedorf Variable-speed Control Gear Type "Variator SR".

MS485 SCHLESINGER "Testing Machine Tools" (94 page edition) Coversthe complete specification of precision limits and how to test a wide varietyof machine tools for accuracy. .

MS486 SCHLUMBERGER (N.SCHLUMBERGER) Drill Point Grinder Type AF1. A set ofthree Electrical Schematics.

MS487 SCHNEIDER Model RHB Surface Grinder. Operating and MaintenanceInstructions.

MS487A SCHNEIDER ROTARIX R-507 and 510. Sectional Drawings, cam Design Guidesand Camshaft-speed Charts.

MS487B SCHNEIDER JoH2 Surface Grinder. Operating Manual with electrical and floor plan schematics.

MS487W SCHOU Crankshaft Grinder Type GS. Slim (22-page) but complete Operation Manual.

MS487X SCHOU Crankshaft Grinder Type 1500/260. Operation Manual with ElectricalSchematics and Parts as Sectional Drawings.

MS488 SCHUBERT WM1 Roll Straightening Machine. Operator's Instruction Manualwith basic Maintenance. Includes Sectional Drawings and Electrical Schematics(two editions are included).

MS491 SCHUMANN (Heinrich Schumann) Coil Winder 730 Selektastat. Instruction and MaintenanceManual with Parts as Annotated Ph0tographs and Electrical Schematics.

MS491 A SCHUMANN (Heinrich Schumann) SELEKTASTAT 740. Instruction andMaintenance Manual.

MS493 SCHUTTE WU3 and WU4 Tool and Cutter Grinders: A Complete Data Pack forthese machines including the Operator's Instruction and Maintenance Manualtogether with a detailed and profusely illustrated 40-page "SpecialAttachments and Accessories Catalogue".

MS493A SCHUTTE WU2mS, WU3mS and WU4mS Tool and Cutter Grinders: Detailed Textand Photographic Instruction Book as Practical Examples of how to set up andexecute jobs of various kinds and employ all the accessories. Includes a copyof the Schutte detailed and profusely illustrated 40-page "SpecialAttachments and Accessories Catalogue".

MS493B SCHUTTE 4-spindle full-automatic lathe: VB35, VB50, VB65, VBH130 andVBH155 Spare Parts Lists as useful photographic plates. 174 pages.

MS493C SCHUTTE Sechsspindelautomat SE16 (6-spindle Automatic Lathe SE16):Betriedsanweisung (Operator's Instruction and Maintenance Manual). German Text.

MS493D SCHUTTE VB, SB, VBH and SBH Automatic Lathes. Detailed 168-page Operator's Manual.

MS495 SCINTA (also marketed badged as Scintilla and LESTO) Bar-bed latheOperator's Instruction and Maintenance Manual and Sales and SpecificationCatalogue. German or French text versions available (but English and French inthe Catalogue). Includes many useful diagrams showing the construction of thelathe, screwcutting charts and Electrical Schematics.

MS496 SCM S63 Planer Thicknesser. Spare Parts as Exploded Component drawings.Text in English, French and German.

MS496A SCM Shapecut 11 Manual.

MS496B SCM Sandya Uno Finish Sanding Machines, Levigatrici Automatiche, Und Feinschliffautomaten, Ponceuses Automatiques, Lijadoras Automaticas. Operating & Maintenance Instructions, Uso Manutenzione, Betriebes-und Wartungsanleitung, Fonctionnement et Entretien,Uso Y Manutencion. Text in English, Italiano, Deutsch, Francais & Espanol.

MS496B SCM Moulder Model 150 with Tilting Spindle. Spare Parts Manual as usefulExploded Component Drawings.

MS497 SCOTTISH Machine Tool Corporation (Craig & Donald) Plate BendingRolls 15' x 1/2" and 8' x 1/2" (2 manuals). Operator's Instructionand Maintenance Instructions.

MS497A SCOTTISH Machine Tool Corporation (Craig & Donald) Plate FoldingMachine 8-foot by 1/4-inch Operation and Maintenance Instructions.

MS498 SCRIPTA Tool and Cutter Grinders. A Data Pack consistng of two Manuals,one for the Scripta AL34 and the other for the Scripta type that was almostidentical to the Deckel SO and SOE Types. Includes every printed sheetdiscovered for these models: early and late manuals for the simpler"SO" Model together with the full Manual for the more complex andversatile "SOE". Also included is the special Deckel publication"SO Model: Notes on Disassembly and Reassembly - Spare Parts (as sectionalDrawings)", a copy of the maker's comprehensive Sales and AccessoriesCatalogue and all the extracts from the "Deckel Technical Bulletins"that dealt with these machines. Very comprehensive instructions include cutterprofiles, tool angles, cutting speeds, how to grind back rack angles, pointedcutters, tapered cutters, twist-drill grinding attachment, single lip cutters,grinding straight-toothed cylindrical or tapered two-lip or three-tooth cutterswith concentric or off-centre radii. etc. English text.

MS500/MC66 SCRIVENER CENTRELESS GRINDING: a "Handbook for Beginner andExpert" by the Scrivener Company. Details the principles, typical machinesand illustrated work examples. 103 pages.

MS500A SCRIVENER: Equipment for Centreless Grinding: Shows the range of extrasand how to apply them. Includes: workrests, plunge feed equipment, wheeladaptors and flanges, wheel truing former plates, auto-infeed camplates, finefeed equipment, deadstops, plain wet grinding equipment, wheels, diamonds,workplates, through-feed equipment, micro-sizing, wheel balancing, coolantthrough wheel, coolant filtration, low-voltage lighting, pressure gauge,workchutes, automatic ejectors, outboard supports, spring-loaded fingers,pressure rollers, process timers, variable auto-infeed camplates, etc. Appliesto all Scrivener models.

MS500B/MW382 SCRIVENER (Wickman-Scrivener) No. 0 CENTERLESS GRINDER. DetailedOperator's Instruction and Maintenance Manual.

MS500C SCRIVENER (Wickman-Scrivener) No. 1 CENTERLESS GRINDER Model C and D:Operator's Instruction and Maintenance Manual.

MS500D SCRIVENER (Wickman-Scrivener) No. 2 CENTERLESS GRINDER: Operator'sInstruction and Maintenance Manual with Electrical Schematic.

MS500DJ SCRIVENER (Wickman-Scrivener) No. 2J CENTERLESS GRINDER: Operator'sInstruction Manual.

MS500E SCRIVENER (Wickman-Scrivener) 2C and 2G CENTERLESS GRINDER: Operator'sInstruction and Maintenance Manual.

MS500F SCRIVENER (Wickman-Scrivener) No.2 Super Surface Grinder: Operator'sInstruction and Maintenance Manual (pc).

MS500G SCRIVENER (Wickman-Scrivener) 345 Internal Grinding Machine: Operator'sInstruction Manual. Includes an Electrical Drawings, Hydraulic Schematic and Cycleand Solenoid Sequence Charts.

MS500H SCRIVENER (Wickman-Scrivener) 618 and 824 Super Surface Grinders(6" x 18" and 8" x 24"): Operator's Instruction andMaintenance Manual with a copies of two Sales and Technical SpecificationCatalogues.

MS500J SCRIVENER (Wickman-Scrivener) Valve Rocker Grinding Machine. OperatingManual.

MS 500K SCRIVENER (Wickman/Scrivener) 18/20 Duplex Grinder. Operator's Manual.

MS502 SEBA (Spain) also badged as "Pinondo". Shapers Models: 450, 500, 550, 600, 650, 750, 850 and 1000.Illustrated Parts Manual. *

MS502A SEBA (Spain) also badged as "Pinondo". Shapers Models: 450, 500, 550, 600, 650, 750, 850 and 1000.Operator's Instruction Manual. *

MS503 SEBASTIAN 13-inch Geared-head Lathe. Operator's Instruction andMaintenance Manual and Exploded-parts Assembly Diagrams. Includes a copy of themaker's Sales & Specification Catalogue.

MS503A SEBASTIAN 18-inch and 20-inch Type M.C. Geared-head Lathe. Operator'sInstruction and Maintenance Instructions.(22 pages).

MS507 SECMU Milling Machine Vertical Head No. 50 INT fitting - a set of RakeCharts giving angles for: "Spindle upward to right; Spindle downward toleft; rack to left; Spindle upward to left, Spindle downward to right and Rackto Right and their Instructions for use. The charts appear to apply to all themulti-angle heads fitted to Secmu millers.

MS507A SECO Dynafile 55-L Operating and Repair Instructions.

MS508 SEDGWICKS(SEDGWICK) Plate Bending and Folding Machines (Brake Press). Operator'sInstruction and basic Maintenance Instructions and a copy of the maker's Sales & Technical Specification Catalogue.

MS508A SEDGWICKS (SEDGWICK) Section Curving and Angle bending Machines.Operator's Instruction and basic Maintenance Instructions.

MS508C SEDGWICKS (SEDGWICK) Overcrank Heavy-duty Guillotine Shears. Starting upInstructions, Maintenance and Operation. 8 pages.

MS509 SEGATRICE "AUTOMA S" Hacksaw Models 230, 280, 330 and 420.Instruction Manual English and Italian text.

MS 509A SEGATRICE TRL 300 Cut-off saw MEP SEGATRICE) Operating Instructionswith Parts as Exploded Component Drawings and an Electrical Schematic. English,French, German, Italian and Spanish text.

MS510 SEEST Centreless Crankshaft Grinder. Instructions on the Care andOperation.

MS511 SEIKI Milling Machine Model G/V-2000 and 837. Instruction Manual andParts Manual as Sectional Drawings (also marketed as the BUFFALO and MICROCUT837).

SEISAKUSHO see under "TOYOKOKI"

MS512 SELSON 6" Oil Grooving Machine. Operator's Instruction Manual andParts Manual as Detailed Sectional Drawings.

MS513 Seneca Falls "Star" Lathe 14" to 20" range Operator'sInstruction Manual and Replacement Parts Manual. This is a useful though"generic" publication - and was also the one that the company sentout when enquiries were made about their older machines.

MS513A SENECA FALLS Lathes Data Pack including: the Operator's InstructionManual and Replacement Parts Manual (a useful though "generic"publication the company sent out in the 1930s when enquiries were made abouttheir older machines) and four Full-range Catalogs: No. 20B circa 1905; No. 24Bincluding price lists from 1911 and 1913 (this catalog is interesting inshowing both the common flat-belt drive lathes and also the rare geared-headmodels); Catalog No.27 with a photographic Parts Manual of the 1920s range oflathes; Catalog No. 17 from circa 1920 complete with Parts and threadingcharts; Catalog No.28 from Circa 1925 and Catalog No. 32 dated 1936 completewith a letter from the factory. 255 pages.

MS514 SENIOR (Tom Senior) Milling Machines Operator's Instructions and PartsManual with Sectional Drawings. Covers all the common Senior millers: M1,Major, E.L.T., V.S., Junior, Universal, Light Vertical S Type and a special6-page manual and parts list for the E-Type head. Comprises a set of sheetsissued at various times by the company. Also included is a full set of Salesand Specification Catalogues detailing the machines as produced from the 1950suntil the end in the 1980s.

MS514A/S160 SENIOR (Tom Senior) earlier machines: lathes, shapers, saws, etc. -no manuals were ever printed but there is a very interesting early GeneralCatalogue from 1934 showing a range of Lathes in kit and complete forms:Shapers, Planers, Drills, Milling Slides, Dividing Attachments, Castings,Chucks, Horizontal Miller and Tools for Engineers, etc. 72 pages.

MS515 SENTINEL CRI-DAN High Speed Threading machines (lathe) - see underHerbert/Sentinel and CRI-DAN

MS516 SERVO PRODUCTS - power feed attachments for machine tools. Operating andServicing Manual and exploded-diagrams for Models 80, 100 and 200.

MS517 SHAPECUT MACHINES SCM 11 SYSTEM: Operator's Instruction Manual.

SHADOWMASTER Projectors = see under "BATY"

MS51 SHAPER WORK - A complete, highly detailed and well-illustrated 330-pagebook on how to use and get the best from any type or make of shaper. "Forbeginners in Machine Shop Practice". Features a larger machine but themethods and principles involved apply to all makes and types. A large, heavyvolume bound in two parts.

MS51A SHAPER Manual - How to Run a Metal Working Shaper - Basic, concise butvery useful Manual.

MS522 SHAPE-RITE 8-inch stroke shaper. Slender (8-page) but useful Operator'sInstruction Manual and Sectional-parts drawing.

MS523 SHARP Millers (UK). No hand book was produced for these machines butthere is a useful 5-page Sales and Specification catalogue available.

MS524 SHARP Lathe Model 1118H (Hardinge HL-H Copy made in Taiwan) Parts Manualas Sectional Drawings.

MS526 SHELDON "The Care and Operation of a Lathe" Pre-WW2 Sheldonlathes did not have a dedicated handbook, instead the Company issued thisdetailed 105 page small-format Manual showing how to get the best from thesewell-built machines.

MS526A Sheldon early 9-inch, 10-inch and 11-inch lathes with either exposedflat-belt overhead or on underdrive stands. This model began life in the late1930s as a rather agricultural-looking device but, by the early 1940s wasoffered on either on a very neat underdrive stand or cast-iron plinth and thedesign cleaned up to look much more modern. Unfortunately a proper handbook wasnever produced for early Sheldon lathes with 10 and 11-inch swings - but we canoffer a complete "data pack" that gives all the information knownabout this model (Pictures of this type here:http://www.lathes.co.uk/sheldon/page5.html) It consists of: - "Care &Operation of a Lathe" by Sheldon - the large and well-illustrated SheldonSales, Accessories and Technical Specification Catalogue of the late 1930s andearly 1940s - a copy of the handbook for the later L and XL 10-inch lathes andthe exploded-component parts manual for the 11-inch models S (Underdriven) andKS (Overhead driven). Though these latter L and XL lathes are somewhatdifferent to the earlier versions, numbers of parts were were carried over andthe all screwcutting data is identical. 190 pages.

MS525B Sheldon 10-inch L and XL (and many variants) later-type model on anUnderdrive stand (either full-length sheet-steel or cast-iron pedestal type),V-belt transmission a screwcutting gearbox with a single selector lever on thefront face as sold from the 1940s to early 1950s under various designations. Acomplete 169-page Data Pack consisting of: Operator's Instruction andMaintenance Manual, Illustrated Parts Manual as Exploded Component Drawings, anElectrical Schematic, the contemporary 48-page maker's Sales, TechnicalSpecification & Accessories Catalog and a copy of the Sheldon Publication Careand Operation of a Lathe. For the later twin-tumbler version see:https://store.lathes.co.uk/print/ms526bt

MS526BT SHELDON 10-inch L and XL later-type model mounted on an underdrivestand in either braced sheet-steel or cast iron that held an ordinary V-belttransmission or a rather complex variable-speed drive. The lathe was currentfrom the early 1950s to the 1970s and sold under various Model designations.Screwcutting was by a gearbox with two sliding levers. A complete 110-page DataPack conOperation &Maintenance Manual and Illustrated Parts Manual asExploded Component Drawings. Contains an Electrical Schematic a copy of themaker's comprehensive Sales & Specification Catalogue and a copy of theSheldon Publication "Care and Operation of a Lathe".You canorder it on-line here: http://www.store.lathes.co.uk/print/MS526BT This latheis shown in the second picture down on this page:http://www.lathes.co.uk/sheldon and here: http://www.lathes.co.uk/sheldon/page2.html

S170 SHELDON (USA) Very detailed, superbly produced Whole-range Catalogue isavailable showing the lathes as they were produced from the mid 1930s to early1940s. 48 pages.

MS526C SHELDON Newer Series S and M 11-inch and 13-inch Lathes. Setting-upInstructions, Spindle Dismantling, Metric Screwcutting Instructions, Parts asExploded Component Drawings and a detailed, full-range Sheldon Sales,Specification and Accessories catalogue.

MS526D Sheldon M 13-inch Series Lathe Illustrated Parts Manual.

MS526E Sheldon R13 and R15 Lathe Instruction, Maintenance, Lubrication Manualand Exploded Parts' Lists.

MS526F Sheldon S-56 (underdrive) and KS (overhead drive)Older 11" LatheIllustrated Parts Manual f 18 pages.

MS526G SHELDON (Vernon) Horizontal Miller. Two editions of the IllustratedParts Manual as Exploded-component drawings - one containing basic operator'sInsructions.

MS526H SHELDON 12-inch SHAPER. Parts Manual as Exploded Diagrams showing themachine's detailed construction. Includes a copy of the maker's Sales andSpecification Catalogue.

MS526Z Shemach Press Brake Type OS25/4 Operating Instructions with a simple motor-feed circuit diagram.

MS527 SHERATON "9-inch" lathe. The best Manual for the Sheraton isthe one produced in England for the South Bend clone by Boxford. Unlike theSouth Bend book "How to Run a Lathe" this 137-page editionconcentrates in detail on the 9-inch lathe, not the whole range, and thuscontains much more information about how to operate it as well as manyscrewcutting charts, lists of changewheels set-ups as machines left the factory,metric conversions and other valuable data. A few mechanical details aredifferent but the operating procedures are identical. Also included is a copyof the original Sheraton advertising catalogue and Sheraton Spares Manual as aphotographic listing of parts for the Models A, B, C and AR, BR and CR.

MS527A SHERATON Cub, Cadet, Diploma and Defiance lathes. These lathes werecopies of the LeBlond and "LeBlond Makino" lathes from the 1950s to1980s. Supplied for these Sheraton lathes is a copy of the detailed andwell-illustrated Instruction, Maintenance & Illustrated Parts Manual asdetailed Cross-Sectional Drawings as published by LeBlond, not Sheraton.Instead of the various models being accorded a Model Type by size, as per theLeBlond system. Sheraton gave them individual names: Cub, Cadet, Diploma andDefiance.

MS529B10V SHIZUOKA B-10V Milling Machine. Operator's Instruction andMaintenance.

MS529P SHIZUOKA B-10V Milling Machine. Parts List as Sectional Drawings (not afirst-class copy).

MS529A SHIZUOKA AN-S NC Vertical Milling Machine. Operator's Instruction andMaintenance Manual and Parts Manual as useful sectional drawings.

MS529B SHIZUOKA VHR-A Milling Machine. Spare Parts manual as useful sectionaldrawings.

MS529BP SHIZUOKA VHR-A Vertical Turret Milling Machine. Instruction Manual.

MS529C SHIZUOKA VHR-G Turret Type Vertical and Horizontal Milling Machine.Instruction Manual.

MS529D SHIZUOKA B-3V Milling Machine. Parts Manual as Sectional Drawings.

MS529Y SHODA Machine Type NC516P-1326 Electrical Schematics Manual.

MS530 SHORTE No. 16, 18 and 20 Rolloseam Lock Forming and Flanging Attachment.Rolloseam Flanging Machines Models 16, Button Punch and Autoguide, Button PunchSnap Lock Forming Machine, Rolloseam Cleat Forming Machines, OperatingInstructions with Parts as Exploded Component Drawings and Electrical CircuitDiagrams. Includes a very useful copy of "Procedures and Practices in theFabrication of Ducting" (with wide-ranging instructions in calculating,forming corner joints and seams, angle and bar cleats, making a Pittsburgh lockand right angle flanges, button-punch snap locks, using the cleat cutterattachment, joining ducts, etc, etc. A complete set of technical Sales andSpecification folders for the various machines is also included.

MS532 SHOPSMITH Mk. 7 Universal Woodworker (sometimes badged "FUSSO"or "SHOPSMITH"). Operator's Instruction Manual with Parts as ExplodedComponent Drawings

MS534 SHW Universal Milling Machine UF2: Operator's Instruction and MaintenanceManual with some useful Sectional Drawings and Electrical Schematics. IncludesFitting and Maintenance Instructions for the Ortlinghause Slip Clutches, theOrtlinghause Elektro-Magnetic Multi SINUS Clutches, Ortlinghause Gear Units anda comprehensive Operating and Maintenance Manual for the Siemens Type OR2Electric Motors. Also includes a detailed 44-page Sales & TechnicalSpecification Catalogue.

MS534SX Sian FRsBR 60 Rotary Table Surface, Internal and External CylindricalGrinding Machine with three Grinding Heads. Operating, Maintenance andAdjustment Manual.

MS534A SICAR SCP 16, 18, 21, 23 and H5U Planing & moulding machines.Operator's Instructions and Parts Manual as exploded Component Drawings.

MS534X SICK Optic Elektronic Safety Light Curtains LVU450 and LVU1400. Installtion, Operation and Detailed Technical Data including several Electrical Schematicsand numerous Sectional Drawings.

MS535 SICME Sicmatic SB200 Lathe Instruction Manual (basic).

MS536 SIDNEY Operator's Instruction Manual for the 14", 16" 18"and 20" Geared Head lathes of the 1940 and early 1950s. Includes detailedCross-Sectional Drawings of the entire lathe and a copy of the well-illustratedand detailed sales and technical Specification Catalogue.

SIEG Model C0 Micro lathe. Operator's Instruction Instructions with parts asexploded component pictures and wiring diagrams.

MS538 SIEMENS SINUMERIK System 3 Operating Instructions Parts 2 and 3.

MS538A SIEMENS SINUMERIK System 3. Comprehensive Training Folder with SerialInterface for Data In and Data Out and Operating Instructions Part 3 Version4and Interface Instructions part 2E8.87.

MS538B SIEMENS SINUMERIK 3M Programming Instructions.

MS538C SIEMENS SINUMERIK 3G Operating Instructions.

MS538D SIEMENS SINUMERIK 6-B Interface Description with ConnectionRequirements, Contact Description of Interface Sinumerik System 6 InterfaceControl, Interface 6T/6M Servo Drives, Alphabetical Index of Signals, Diagrams6T, Diagrams 6M and External Equipment and operating Elements..

MS538E SIEMENS SINUMERIK NC800S "Basic Service Course". A completeguide to the 800 Series of controllers and the associated systems.

MS538F SIEMENS SINUMERIK 810 and 820. Basic Version 3. "Documentation forSpecialists involved in installation and servicing. Installation Instructionsand Installation Lists" .

MS538G SIEMENS SINUMERIK 810 Operating Instructions.

MS538H SIEMENS SINUMERIK 810M Software Version 1 Operating and ProgrammingManual.

MS538J SIEMENS SINUMERIK 810G Software Version 1 Operating and ProgrammingManual.

MS538K SIEMENS SINUMERIK 850 Commissioning Instructions with Lists.

MS538L SIEMENS SINUMERIK 850 Software Version 4 Service Documentation withInstallation Guide, Instructions and Lists Valid for Sinumerik 850M, 850ME,850T and 850TE.

MS538M SIEMENS SINUMERIK 850 AND 880 Software Version 3. Programming Guide,Planning Guide, Interface Description, Function Blocks, Basic Functions.

MS538N SIEMENS SIMATIC 55 S5-100 U Programmable Controller. Detailed Operator'sInstruction and Programming Manual.

MS538P SIEMENS SIMATIC S5 150K Central Controller, Compact Version.Instructions, Specification Sheets, Maintenance.

MS538Q SIEMENS SIMOREG M Transistor Chopper Operating Manual.

MS538R SIEMENS totally enclosed 3-phase motors Type OR2 to 11 kW. Operator'sInstruction and Maintenance Instructions.

MS538S SIEMENS "Simovert" Transistor Voltage - Source DC LinkConverter Series 6SE46 Instruction Book.

MS538T SIEMENS Sinumerik 840D sl Detailed Service Documentation "TrainingManual".

MS538U SIEMENS 3-Phase Servomotors 1FT6-02, 1FT6-03, 1FT6-04, 1FT6-06, 1FT6-08 and 1FT6-10. Documentation. English, French, German, Italian, Spanish and Swedish text.

MS540 SIG SAWING MACHINE TA 60: Operator's Instruction and Service Manual andParts Manual as Detailed Sectional Drawings:

MS542 SIGMA "Dialair" Instruction and Setting Manual. Includes AEIPressure regulator instruction Manual.

MS545 SIMAT 101 - see under Flexispeed

MS546 SIOME Machine Multiple TC-5. Fonctionnement & Entretien. TexteFrançais (French Text)

MS547 SIMONET basic Working Instructions & Maintenance Guide for theDC-102, DD-102, DR102 and DZ-450 Precision Plain-turning and ScrewcuttingLathes with screwcutting charts (11 pages) Also included are three catalogues:one in English (10 pages); one in English, French and German (8 pages) andanother in French (not such a good reproduction as the others with 6 pages).

MS552 "SIMPLE" Model SG-340 Surface Grinder (Chinese manufacture).Operation Manual.

MS555 SIMPLON 3U Milling Machine (by Gemmo). Simplon 3U Milling Machine (by Gemmo). Operator's Instruction and Maintenance Manual with Parts as Sectional Drawings and an electrical schematic. The manual will also help with the plain, non-swing table version and the knee and table part of the vertical model. Includes a Sales & Technical Specification Catalogues for the: VA, 2URT, UF, UM and UN.

SIMPSON-SEARS - these lathes marketed in Canada were, in general, identical tothe Atlas and Craftsman brand s. If you are in doubt about which model youhave, refer to the Atlas pages in the Archive- or e-mail a photograph to: simpson@lathes.co.uk.

MS560 SINN MS 11/B Universal Miller Instruction & Maintenance Manual.GERMAN TEXT.

SIP JIG BORERS. For data see: SIP jigborers

For a general background to SIPproducts the following catalogue is very handy:

MS826MSTUDER S30, S40, S45Cylindrical Grinder. Detailed Operating and MaintenanceManual with electrical schematics. English, French and German text.
<![if !supportLineBreakNewLine]>
<![endif]>

Please e-mail your requirements :tony@lathes.co.uk

The Best Ski School inVerbier and Zermatt - Switzerland
europeansnowsport.com
Professionally-qualified staff and many native English speakers

click here for lathes.co.uk home page